-
CD4017 Decade Counter IC
The CD4017 IC is a 5-stage CMOS Decade counter that counts to 10. It has 10 d...
The CD4017 IC is a 5-stage CMOS Decade counter that counts to 10. It has 10 decoded outputs and a carry out pin that represents numbers 1 to 10. It also has a single clock pin, so for every clock pulse ,the counting increases... -
74HC00 Quad 2-input NAND Gate IC
The 74HC00 is an IC with four NAND gates. Each gate has its own two inputs, s...
The 74HC00 is an IC with four NAND gates. Each gate has its own two inputs, so the IC is normally referred to as a Quad 2-input NAND gate IC. Though all the gates are powered from a common rail, they operate independently performing... -
74HC04 - Hex Inverter (NOT Gate) IC
The 74HC04 is a Hex Inverter (NOT gate) IC, i.e. it has six NOT gates inside ...
The 74HC04 is a Hex Inverter (NOT gate) IC, i.e. it has six NOT gates inside it and each gate has one input and one output pin. All six NOT gates are powered with a common rail but can operate independently. The recommended operating... -
CD4047/CF4047 - Monostable/Astable Multivibrator IC
The CD4047 is a high voltage multivibrator IC, that can operate in both Monos...
The CD4047 is a high voltage multivibrator IC, that can operate in both Monostable and Astable mode. The IC requires an external resistor and capacitor to set the width of output pulse in monostable mode and the frequency of output pulse in Astable Mode.... -
74LS32 - Quad 2-input OR Gate IC
The 74LS32 is a Dual Input OR Gate with Quad package. It contains four indepe...
The 74LS32 is a Dual Input OR Gate with Quad package. It contains four independent gates each of which performs the logic OR function. Each gate has two inputs that’s why it is named Quad 2-Input OR Gate. It has 12 input output pins for a... -
74HC86 Quad XOR Gate IC
74HC86 IC is a Quad 2-Input OR gate IC with CMOS technology. The IC has four ...
74HC86 IC is a Quad 2-Input OR gate IC with CMOS technology. The IC has four XOR gates, each with two input pins and one output pin. All four gates share the same power line but can function independently on their own. It has... -
CD4027 Dual JK Flip Flop IC
The CD4027 is a Dual JK Flip Flop CMOS IC. It consist of two identical comple...
The CD4027 is a Dual JK Flip Flop CMOS IC. It consist of two identical complementary-symmetry J-K master/slave flip-flops. Each flip-flop has its individual J, K, Set Reset, Clock input signals and buffered Q and Q signals are provided as outputs. The IC has... -
CD4052 4 Channel Analog Multiplexer IC
The CD4052 is a 4 channel differential IC that can be used as both a 4:1 Mult...
The CD4052 is a 4 channel differential IC that can be used as both a 4:1 Multiplexer and a 1:4 Demultiplexer. The IC has digitally controlled analog switches with Low ON impedance and low OFF leakage current. The IC can operate between 3V to... -
CD4001 - Quad 2-Input NOR Gate IC
NOR gate is one of the Universal gates along with NAND gate which means we ca...
NOR gate is one of the Universal gates along with NAND gate which means we can form any logic gate we want by combination of several NOR gates hence for this we can use this CD4001-Quad 2-Input NOR Gate IC to form the combination... -
CD4013 - Dual D-type Flip-Flop IC
The D-type Flip Flop is by far the most important of the clocked flip-flops a...
The D-type Flip Flop is by far the most important of the clocked flip-flops as it ensures that ensures that inputs S and R are never equal to one at the same time. The D-type flip flop are constructed from a gated SR flip-flop... -
CD4011 - Quad 2-Input NAND Gate IC
The CD4011 is a quad package 2-Input NAND gate IC. That is, it has four NAND ...
The CD4011 is a quad package 2-Input NAND gate IC. That is, it has four NAND gates inside a single package and each gate has two input lines and one output line. All the inputs and outputs are buffered and this improves transfer characteristics... -
CD4060 - 14-stage Ripple Carry Binary Counter IC
CD4060 IC is a 14-stage Binary Counter with carry option, that is it counts n...
CD4060 IC is a 14-stage Binary Counter with carry option, that is it counts numbers by incrementing it by one for every clock pulse supplied to its clock pin. It has 12 output pins ranging from Q1 to Q14 excluding Q2 and Q3. When an input clock... -
74HC04 Hex Inverter IC
The 74HC04 is a Hex Inverter (NOT gate) IC. That is the IC has six NOT gates ...
The 74HC04 is a Hex Inverter (NOT gate) IC. That is the IC has six NOT gates inside it and each gate has one input and one output pin. All six NOT gates are powered with a common rail, but can operate independently. It... -
TXS0108E High Speed Full Duplex 8 Channel Bi Directional Logic Level Converter Module
TTL logic require boards to operate on 5V logic levels which is fairly standa...
TTL logic require boards to operate on 5V logic levels which is fairly standard for old microcontrollers and development boards. Even today most of the sensor, development boards and digital circuits run on 5V power supply to easily incorporate them in other circuits without... -
CD4049/HCF4049 Hex Buffer Converter (NOT Gate) IC
CD4049/HCF4049 is a Hex Inverter (NOT gate) IC based in the CMOS technology. ...
CD4049/HCF4049 is a Hex Inverter (NOT gate) IC based in the CMOS technology. That is the IC has six NOT gates inside it and each gate has one input and one output pin. All six NOT gates are power with a common rail, but can... -
CD4070 - Quad 2-Input XOR Gate IC
The CD4070 IC contains four independent Exclusive OR gates inside a single pa...
The CD4070 IC contains four independent Exclusive OR gates inside a single package. It is often times referred to as a quad package 2-Input XOR gate IC. All four gates share the same power rail and each gate has two input lines and one output line.... -
74LS138 - 3 to 8 Decoder De-Multiplexer IC
The 74LS138 is a 3:8 Decoder IC that is commonly used in decoding or de-multi...
The 74LS138 is a 3:8 Decoder IC that is commonly used in decoding or de-multiplexing circuits for memory decoding or data routing purposes. It is designed for high-speed operations and has three enable pins to make it easier to cascade with other ICs. The... -
CD4020 14-bit Binary Counter IC
CD4020 is ripple-carry binary counters that features 14 Stages, push-pull typ...
CD4020 is ripple-carry binary counters that features 14 Stages, push-pull type, balanced outputs, with standard speed (tpd > 50ns). All counter stages are master-slave flip-flops. Supports wide input voltage ranges from 3V to 18V. The maximum input current at 18V is 1uA whereas 100nA at... -
74HC245/74AS245 - Octal Bus Transceiver IC
The 74HC245 is an octal bus transceiver IC designed for asynchronous two-way ...
The 74HC245 is an octal bus transceiver IC designed for asynchronous two-way communication between data buses. The device inputs are compatible with standard CMOS outputs and with pull−up resistors, they are compatible with LSTTL output. This IC has 3 non-inverting outputs. It is a... -
CD74HC4067 CMOS High Speed 16-Channel Analog Multiplexer Module
This is a breakout board for the very handy 16-Channel Analog/Digital Multipl...
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/ Demultiplexer CD74HC4067. This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It... -
CD4066 - Quad Bilateral Switch IC
The CD4066- Quad Bilateral Switch IC has four switches which can be controlle...
The CD4066- Quad Bilateral Switch IC has four switches which can be controlled individually by their respective control switches. These are bilateral switches which means that they can be made to conduct in both the directions. It has very low internal resistance of 5Ω... -
74HC138 IC - 3:8 Line Decoder/Demultiplexer IC
The 74HC138 is a 3:8 Decoder IC which is, it can control 8 output pins (Y0 to...
The 74HC138 is a 3:8 Decoder IC which is, it can control 8 output pins (Y0 to Y7) by just using three address pins (A0 to A2) as inputs. The IC also has 3 Enable pins which can be used to cascade more than... -
74LS90 Decade Counter IC
The 74LS90 IC is a Decade Counter, that is it can count from 0 to 9 based on ...
The 74LS90 IC is a Decade Counter, that is it can count from 0 to 9 based on the input clock pulse. It has a 4-bit output, meaning it has four output pins which change from 0000 to 1001 to count from 0 to... -
CD4069 - Hex Inverter (Hex Buffer) IC
The CD4069 device consist of six CMOS inverter circuits. These devices are in...
The CD4069 device consist of six CMOS inverter circuits. These devices are intended for all general-purpose inverter applications where the medium power TTL-drive and logic-level-conversion capabilities of circuits such as the CD4009 and CD4049 hex inverter and buffers are not required. It is suitable... -
CD4093 - Quad 2-Input NAND Schmitt Trigger IC
The CD4070 IC contains four independent 2-input NAND gate with Schmitt trigge...
The CD4070 IC contains four independent 2-input NAND gate with Schmitt trigger action on both inputs inside a single package. It is often times referred to as a quad package 2-Input NAND gate Schmitt Trigger IC. The CD4093 IC is normally operated on 5V, 10V, and... -
CD4518 - Dual BCD Up Counter IC
CD4518 consist of two identical, internally synchronous 4-stage counters. The...
CD4518 consist of two identical, internally synchronous 4-stage counters. The counter stages are D-type flip-flops having interchangeable CLOCK and ENABLE lines for incrementing on either the positive-going or negative-going transition. For single-unit operation the ENABLE input is maintained high and the counter advances on... -
74HC139 2 to 4 Decoder/Demultiplexer IC
The 74HC139; 74HCT139 decodes two binary weighted address inputs (A0, A1) to ...
The 74HC139; 74HCT139 decodes two binary weighted address inputs (A0, A1) to four mutually exclusive outputs (Y0 to Y3). Each decoder features an enable input (E). When E is HIGH all outputs are forced HIGH. The enable input can be used as the data... -
74HC244 Octal Buffer IC
The 74HC244 is an 8-bit buffer/line driver with 3-state outputs. The device c...
The 74HC244 is an 8-bit buffer/line driver with 3-state outputs. The device can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on OE causes... -
CD4050 - Hex Buffer Converter IC
The CD4050 is a logic level conversion IC with six non-inverting hex buffers....
The CD4050 is a logic level conversion IC with six non-inverting hex buffers. This device supports logic level conversion while only requiring a single supply voltage (Vcc). When this IC is used for logic level conversion, the input signal high level (VIH) can exceed... -
MC14071 - Quad 2-Input OR Gate IC
MC14071 is Quad 2-Input OR Gate 14 Pin IC. The MC14071 provides 4 independent...
MC14071 is Quad 2-Input OR Gate 14 Pin IC. The MC14071 provides 4 independent 2-input OR gates with standard push-pull outputs. The device is designed for operation with a power supply range of 5.0V to 18.0V. When operating at 5V the maximum low level... -
74LS109 Dual J-K Positive-edge-triggered Flip-Flop IC
74LS109 IC has two independently functional JK-flip flops inside a single pac...
74LS109 IC has two independently functional JK-flip flops inside a single package. The Flop-flops come with clear and clear option. Each flip has Preset, clear, clock, J and K asinput pins and Q, Q bar as output pins. 74LS109 IC has an operating voltage... -
74HC573 - Octal D-type Transparent Latch IC
The HC573 devices are octal transparent D-type latches designed for 2-V to 6-...
The HC573 devices are octal transparent D-type latches designed for 2-V to 6-V VCC operation. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is low, the Q outputs are latched at the logic levels of...