-
3S BMS - 20A Li-ion Battery Protection Board for 3.7V NMC cells
Lithium-Ion batteries though have high energy density and light in weight, ar...
Lithium-Ion batteries though have high energy density and light in weight, are very dangerous if abused i.e., if you overcharge or undercharge the battery or draw more current than it can provide then it can explode damaging the surrounding or even potentially harm the... -
3S 40A Li-ion Battery Protection BMS Board for 3.7V NMC cells
This 3S 40A Li-ion Battery Protection Board BMS is designed to protect lithiu...
This 3S 40A Li-ion Battery Protection Board BMS is designed to protect lithium-ion batteries that have a normal voltage of 3.7V and a fully charged voltage of 4.2V. The Li-ion Battery Protection Board is basically a protection IC for 3-serial-cell lithium-ion/ lithium polymer rechargeable... -
3S 10A Battery Protection BMS Module
This is a 3S 10A battery protection module for 18650 lithium batteries or p...
This is a 3S 10A battery protection module for 18650 lithium batteries or polymer lithium battery series combination. It provides over-charge, over-discharge, over-current, short circuit protection. Features and Specifications: Operating current : 6 – 8A. Current limit : 10 – 13A. Storage condition : -40 ~... -
600mAh 3.7V 14500 Li-ion Battery with BMS and SM Connector
600mAh 3.7V 14500 Li-ion Battery is a good quality rechargeable battery. Thi...
600mAh 3.7V 14500 Li-ion Battery is a good quality rechargeable battery. This Battery can be the best Replacement to the normal Non-Rechargeable AA Battery used in many applications such as in RC Transmitter/ Receiver Remote, which can make your flight driving experience very cost-effective and efficient in terms... -
100mm Barley Paper / Fish Paper with Adhesive for Lithium Battery Pack Insulation - 1 meter
Barley Paper Adhesive roll also known as Fish paper has the functions of Insu...
Barley Paper Adhesive roll also known as Fish paper has the functions of Insulation, Shielding, and anti-interference, providing high electrical insulation, Mechanical strength, softness, and elasticity. Specifications: Material: Barley Paper Thickness: 0.3mm Width: 100mm Application: Lithium-ion battery pack insulation Features: Adhesive cardboard paper for battery pack insulator.... -
2S Lithium-ion Battery Protection BMS Board - 7.4V 3A
Lithium-Ion batteries though have high energy density and light in weight, ar...
Lithium-Ion batteries though have high energy density and light in weight, are very dangerous if abused i.e. if you overcharge or undercharge the battery or draw more current than it can provide, then it can explode damaging the surrounding or even potentially harm the... -
4S 40A Lithium Battery Protection BMS Board for 3.7V NMC cells
Lithium Ion batteries though have high energy density and light in weight, ar...
Lithium Ion batteries though have high energy density and light in weight, are very dangerous if abused i.e. if you overcharge or undercharge the battery or draw more current than it can provide then it can explode damaging the surrounding or even potentially harm... -
4s 20A BMS For LiFePo4 With Balancing 12.8V
4s20A Bms For LFP With Balancing 12.8V : This BMS is commonly used in making ...
4s20A Bms For LFP With Balancing 12.8V : This BMS is commonly used in making battery pack for EV and Solar application and also perform very well in under extreme conditions. The temperature sensor is used to monitor battery temperature. Temperature is important, because... -
4s 10A Bms For LFP With Balancing 12.8V
4s10A Bms For LFP With Balancing 12.8V : This BMS is commonly used in making ...
4s10A Bms For LFP With Balancing 12.8V : This BMS is commonly used in making battery pack for EV and Solar application and also perform very well in under extreme conditions. The temperature sensor is used to monitor battery temperature. Temperature is important, because... -
1S 6A LFP 32650 Lithium Battery Protection Board 3.2V BMS
Lithium Batteries are extremely sensitive and dangerous to use without a prop...
Lithium Batteries are extremely sensitive and dangerous to use without a proper protection circuit. This 1S 6A LFP BMS circuit that can be easily used and installed in an 32650 Li-ion Battery. Since this is rated for 1S battery, the operating voltage is 2.5V... -
Plastic Battery Box For Lithium Battery Pack (150x94x63)mm - 6Ah/7.2Ah/10Ah
This is a plastic battery box that can be used as an enclosure/casing for lit...
This is a plastic battery box that can be used as an enclosure/casing for lithium battery packs. It is ideal for 18650, 2700, and 32650 lithium cells. The casing is made of plastic and comes with positive and negative F2 Tabs Product Specification: Material:... -
1S 3A BMS Module / 3.7V Lithium Battery Protection With Nickle
Lithium-Ion batteries though have high energy density and light in weight, ar...
Lithium-Ion batteries though have high energy density and light in weight, are very dangerous if abused i.e., if you overcharge or undercharge the battery or draw more current than it can provide then it can explode damaging the surrounding or even potentially harm the... -
3S 5A Lithium Battery Protection BMS Module for 3.7V NMC cells
The 3S 5A Lithium Battery BMS Module protects 3-cell (3S) 3.7V NMC battery pa...
The 3S 5A Lithium Battery BMS Module protects 3-cell (3S) 3.7V NMC battery packs with overcharge, over-discharge, short circuit, and overcurrent protection. It supports 6A continuous discharge and features passive balancing for improved battery life. Specifications: Working Current: 3A Maximum Peak Current: 5A Overcharge... -
1mm Epoxy Fiber Sheet for Lithium Battery Pack - 300×200 mm( Pack of 4 Sheets)
After the cells are assembled, the whole battery pack needs to be fixed with ...
After the cells are assembled, the whole battery pack needs to be fixed with insulating sheets. The reason why the epoxy sheet is selected as the outer casing of the battery pack instead of steel or aluminum one is that although these materials are... -
4S 6Amps LFP Battery Protection BMS Module for 3.2V LFP cells
This 4S BMS Protection Module is a low-cost stand-alone circuit board to prot...
This 4S BMS Protection Module is a low-cost stand-alone circuit board to protect your LiFePo4 battery pack from over-discharge, over-charge and short circuit. It is designed to simultaneously monitor and control the charge and discharge process of four LFP batteries connected to it. Product Description of... -
7.4V 2S 4A BMS Li-ion Battery Protection Board for 2 cell NMC
The 7.4V 2S 4A BMS for NMC cell Li-ion protection board is a circuit board de...
The 7.4V 2S 4A BMS for NMC cell Li-ion protection board is a circuit board designed for 2-cell Li-ion batteries with a nominal voltage of 7.4V and maximum discharge current of 4A. It is responsible for managing and protecting the battery during charging and... -
WATTNINE® 3.7V 5200mAh Lithium Battery Pack with 3 Year Warranty
This is a high quality 18650 lithium NMC 3.7V 5200mAh battery pack with BMS P...
This is a high quality 18650 lithium NMC 3.7V 5200mAh battery pack with BMS Protection board. The cell has a JST 2-pin connector attached to it so that it can be easily used in portable products like Bluetooth Speakers, FM radios, Flashlights, Toy cars,... -
Plastic Battery Box For Lithium Battery Pack (150x98x94)mm - 12Ah/18Ah/20Ah
This is a plastic battery box that can be used as an enclosure/casing for li...
This is a plastic battery box that can be used as an enclosure/casing for lithium battery packs. It is ideal for 18650, 2700, and 32650 lithium cells. The casing is made of plastic and comes with positive and negative F2 Tabs Product Specification: Material:... -
4S 100A NMC Battery Balance Charging Protection BMS Module
This 4S 16.8V 100A NMC BMS module is specifically designed for 4S lithium bat...
This 4S 16.8V 100A NMC BMS module is specifically designed for 4S lithium batteries, providing comprehensive protection and balancing features for a wide range of applications. It offers flexibility with an adjustable string count, ensuring compatibility with various setups. The module incorporates a dedicated chip... -
4S 20A 18650 BMS/ Battery Protection Board
The 4S 14.8V 20A Lithium battery Protection Board comes with over-charge, ove...
The 4S 14.8V 20A Lithium battery Protection Board comes with over-charge, over-discharge, over-current and short circuit protection, for a variety of various shapes 3.7V lithium-Ion batteries. It is Small size square shape board under which four 18650 cells can be packed suitable for many requirements... -
DALY Li-ion NMC 16S 60V 40A Waterproof Battery Management System - BMS Protection Board
Daly 16S 60V 40A BMS is a Lithium Battery Protection Board (PCM BMS) for bala...
Daly 16S 60V 40A BMS is a Lithium Battery Protection Board (PCM BMS) for balance charging. It uses an A-level protective integrated circuit IC. Its high load capabilities and 20A continuous discharge current performance make it a reliable solution for battery packs. It features a power MOSFET... -
DALY LiFePo4 4S 12V 40A Waterproof Battery Management System - BMS Protection Board
Daly Lifepo4 4S 12V 40A BMS is an 4 Cell in Series 12V circuit power tool mos...
Daly Lifepo4 4S 12V 40A BMS is an 4 Cell in Series 12V circuit power tool mostly used for solar lighting. It is designed for lithium Batteries for charging, Protection from overcharge, and Over-discharge. The battery protection board, as the name suggests battery protection board... -
2S 7.4V 13A 18650 Lithium Battery Protection BMS Module
Features: Battery Configuration : Suitable for a 2S (2-series) configuration...
Features: Battery Configuration : Suitable for a 2S (2-series) configuration with a nominal voltage of 7.4V (3.7V per cell). Overcharge Protection: Protects against overcharging. Over-Discharge Protection: Prevents over-discharging. Short Circuit Protection: Provides protection against short circuits. Requires addressing the short circuit cause before charging can resume. Effective Life:... -
3S 100A NMC Battery Balance Charging Protection BMS Module
This 3S 12V 100A NMC BMS module is specifically designed for 3S lithium batte...
This 3S 12V 100A NMC BMS module is specifically designed for 3S lithium batteries, providing comprehensive protection and balancing features for a wide range of applications. It offers flexibility with an adjustable string count, ensuring compatibility with various setups. The module incorporates a dedicated... -
DALY Li-ion NMC 10S 36V 20A Waterproof Battery Management System - BMS Protection Board
Daly 10S 36V 20A is a Lithium Battery Protection Board (PCM BMS) for balance ...
Daly 10S 36V 20A is a Lithium Battery Protection Board (PCM BMS) for balance charging. It uses an A-level protective integrated circuit IC. Its high load capabilities and 20A continuous discharge current performance make it a reliable solution for battery packs. It features a power MOSFET with... -
1S 3A 18650 (NMC) Lithium Battery BMS Round Shape With Nickel Strip
Lithium Batteries are extremely sensitive and dangerous to use without a prop...
Lithium Batteries are extremely sensitive and dangerous to use without a proper protection circuit. This 1S 3A BMS circuit can be easily used and installed in an 18650 Li-ion Battery. Since this is rated for 1S battery, the operating voltage is 3.2V to 4.2V. It supports 3A of... -
WATTNINE® 3.7V 4400mAh Lithium Battery Pack with 3 year warranty
This is a high quality 18650 lithium NMC 3.7V 4400mAh battery pack with BMS P...
This is a high quality 18650 lithium NMC 3.7V 4400mAh battery pack with BMS Protection board. The cell has a JST 2-pin connector attached to it so that it can be easily used in portable products like Bluetooth Speakers, FM radios, Flashlights, Toy cars,... -
DALY LiFePo4 16S 48V 40A Waterproof Battery Management System - BMS Protection Board
Daly Lifepo4 16S 48V 40A BMS is an 16 Cell in Series 48V circuit power tool m...
Daly Lifepo4 16S 48V 40A BMS is an 16 Cell in Series 48V circuit power tool mostly used for solar lighting. It is designed for lithium Batteries for charging, Protection from overcharge, and Over-discharge. The battery protection board, as the name suggests battery protection board... -
DALY Li-ion NMC 17S 60V 40A Waterproof Battery Management System - BMS Protection Board
Daly 17S 60V 40A BMS is a Lithium Battery Protection Board (PCM BMS) for bala...
Daly 17S 60V 40A BMS is a Lithium Battery Protection Board (PCM BMS) for balance charging. It uses an A-level protective integrated circuit IC. Its high load capabilities and 40A continuous discharge current performance make it a reliable solution for battery packs. It features a power MOSFET... -
DALY Li-ion NMC 20S 72V 40A Waterproof Battery Management System - BMS Protection Board
Daly 20S 72V 40A BMS is a Lithium Battery Protection Board (PCM BMS) for bala...
Daly 20S 72V 40A BMS is a Lithium Battery Protection Board (PCM BMS) for balance charging. It uses an A-level protective integrated circuit IC. Its high load capabilities and 40A continuous discharge current performance make it a reliable solution for battery packs. It features a power MOSFET... -
1S 5A NMC Battery Protection Module
This is a 1S protection module bms for the NMC (Lithium Manganese Cobalt Oxi...
This is a 1S protection module bms for the NMC (Lithium Manganese Cobalt Oxide) batteries. This board has the following protective functions from: over-charge, over-discharge, over-current, over-temperature and short-circuit. It is designed to protect lithium-ion/polymer battery for one-cell lithium-ion/polymer battery powered systems, such as... -
H-Shape 2P 0.15mm Coated Nickel Strip for 32650 Cells (49.5mm x 0.15mm) - 1 Meter
This is an H-shape nickel strip suitable for spot welding while building batt...
This is an H-shape nickel strip suitable for spot welding while building battery packs with 32650 Lithium-Ion/phosphate battery cells. It gets soldered quickly with high tensile tension and low resistivity and provides corrosion resistance over time. Features and Specifications: Material: Metal (Nickel) Color: Silver...
BMS
Close
Sidebar
Categories
- Development Boards
-
Sensor Modules
- Color Sensors
- Current Sensors
- Distance Sensors
- Fingerprint Sensors
- Flex Sensors
- Flow Sensors
- Gas Sensors
- Hall/Magnet Sensors
- Heartbeat Sensors
- Humidity Sensors
- Temperature/Humidity Sensors
- IR/Motion Sensors
- Light Sensors
- Motion/Tilt Sensors
- PH Sensors
- Pressure Sensors
- Accelerometer and Gyrometer Sensors
- Proximity Sensors
- Rain/Soil Moisture Sensors
- Soil Sensors
- Sound Sensor
- Touch Sensors
- Vibration Sensors
- Voltage Sensors
- Water Level/Flow Sensors
- Weighing Sensors
- RFID Tags and Modules
- Semiconductors & Prototyping Components
- Batteries, Power Supplies & Accessories
- Wireless & IoT Products
- Switches, Relays & Protection
- Lighting & LEDs
- Motors, Drivers & Pumps
- Wires, Cables & Connectors
- Robotics & DIY Learning Kits
- 3D Printers & Parts
- SMD Components
- Electronic Modules
- Drone Components
- Hardware Instruments & Tools
- Displays
- Shop By Brand
- Choosing a selection results in a full page refresh.