-
8x8 Dot Matrix Display Module with Driver Control IC
The 8x8 Dot Matrix Display module consists of the 8x8 LED matrix display and ...
The 8x8 Dot Matrix Display module consists of the 8x8 LED matrix display and the MAX7219 driver IC connected to it. It is very easy to interface with development boards like Arduino, Raspberry pi as 7219 IC uses only 3 pins to connect with your controller... -
LM3914 Dot/Matrix Display Driver IC
The LM3914 is a display driver IC, it can control upto 10 LEDs so commonly us...
The LM3914 is a display driver IC, it can control upto 10 LEDs so commonly used with 5x5 Dot Matrix displays or the 10-segment LED bar displays. It controls a BAR or DOT LED display by turning on and off depending on voltage levels... -
4.7pF Ceramic Capacitor (Pack of 5)
Ceramic Capacitors are low cost and high speed switching capacitors. They are...
Ceramic Capacitors are low cost and high speed switching capacitors. They are normally used for noise filtering, tuning, coupling and other applications. They can also be found it RC, LC and RLC filters. Ceramic capacitor can switch faster than electrolytic capacitors, but they are... -
74LS47 7-Segment Driver IC
The SN74LS47 is a 7-segment Driver IC. It is used to drive a 7-segment displa...
The SN74LS47 is a 7-segment Driver IC. It is used to drive a 7-segment display without the need of a microcontroller. It accepts decimal values (Binary coded) as inputs and provides a pattern on output pins that can display from 0 to 9 on... -
10uF / 10000nF 50V 0805 X7R SMD Capacitor (Pack of 5 Pieces)
This 10uF SMD capacitor uses surface mount technology and comes in a 0805 pac...
This 10uF SMD capacitor uses surface mount technology and comes in a 0805 package. These capacitors have a maximum voltage of 50 Volts, and their tolerance is ±10%. This capacitors offer stability and low losses for resonant circuit applications. Specifications : Capacitance 10uF Tolerance(%) 10 Voltage (V) 50 Dissipation factor... -
74LS32 - Quad 2-input OR Gate IC
The 74LS32 is a Dual Input OR Gate with Quad package. It contains four indepe...
The 74LS32 is a Dual Input OR Gate with Quad package. It contains four independent gates each of which performs the logic OR function. Each gate has two inputs that’s why it is named Quad 2-Input OR Gate. It has 12 input output pins for a... -
AO3400 N-Channel MOSFET SOT-23 SMD Package
The AO3400 is an N-channel MOSFET (Metal-Oxide-Semiconductor Field-Effect Tra...
The AO3400 is an N-channel MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) designed for low-voltage, high-current switching applications. It is housed in a compact SOT-23 surface-mount device (SMD) package, making it ideal for high-density circuit board layouts. Here’s a detailed description of the product: Key Features: Type:... -
100 ohm / 100E 5% SMD Resistor 0805 ( Pack of 20 Pieces )
100 Ohm 1/8W 0805 package Surface Mount Chip Resistor is a small surface-mo...
100 Ohm 1/8W 0805 package Surface Mount Chip Resistor is a small surface-mount resistor. It is a thick film resistor with a ceramic body as a substrate. Specifications : Resistance 100 ohm Resistor Chip size 0805 Tolerance 5% Power 1/8W Temperature Range -55°C to +125°C... -
100nF / 0.1uF 50V (104) Capacitor 0805 SMD ( Pack of 20 Piece)
100nF / 0.1uF 50V Capacitor 0805 SMD ( Pack of 20 Piece)
100nF / 0.1uF 50V Capacitor 0805 SMD ( Pack of 20 Piece) -
74HC86 Quad XOR Gate IC
74HC86 IC is a Quad 2-Input OR gate IC with CMOS technology. The IC has four ...
74HC86 IC is a Quad 2-Input OR gate IC with CMOS technology. The IC has four XOR gates, each with two input pins and one output pin. All four gates share the same power line but can function independently on their own. It has... -
4N35 Optocoupler/Phototransistor IC
Phototransistors means they are transistors which are controlled by a beam of...
Phototransistors means they are transistors which are controlled by a beam of light provided by an IR LED so construction wise this IC has an IR LED which when powered make the transistor in the IC conduct. This IC can be used as a... -
3x7cm Double Sided Universal PCB Prototype Board
The 3x7cm Double Sided Universal PCB Prototype Perf Board is a compact and ve...
The 3x7cm Double Sided Universal PCB Prototype Perf Board is a compact and versatile prototyping solution designed for building and testing circuits with through-hole components. Its double-sided plated-through hole design ensures secure electrical connections and allows for greater routing flexibility. This board features a standard... -
UC3845 Current Mode PWM Controller IC DIP-8 Package
The UC3845 fixed frequency current mode controller is specifically designed f...
The UC3845 fixed frequency current mode controller is specifically designed for off-line and DC-to-DC converter applications offering the designer a cost effective solution with minimal external components. These integrated circuits feature a trimmed oscillator for precise duty cycle control, a temperature compensated reference, high... -
2SA1943-O PNP Power Amplifier Transistor
The 2SA1943 is a high power PNP Power transistor manufactured by Toshiba. It ...
The 2SA1943 is a high power PNP Power transistor manufactured by Toshiba. It has a collector continuous current of 15A and a Collector-Emitter voltage of 230V. The base current is about 1.5A and the Emitter base voltage is 5V. Due to its high... -
TL072 - Low Noise Dual JFET Op-Amp IC
The TL072 is an Op-Amp IC that has a JFET input. Having a JFET at the input s...
The TL072 is an Op-Amp IC that has a JFET input. Having a JFET at the input side will increase the bandwidth gain and reduce the input noise of the IC. Hence TL072 IC is commonly used in noise sensitive applications. Along with that,... -
MOC3041 Zero Cross Optoisolator Triac Driver IC
The MOC3041 is an optocoupler IC consisting of an infrared emitting diode opt...
The MOC3041 is an optocoupler IC consisting of an infrared emitting diode optically coupled to a monolithic silicon detector performing the function of a Zero Voltage Crossing bilateral TRIAC driver. It can be used for high-load AC switching. This zero-crossing optocoupler IC will be... -
Micro USB Type B Mike Patch Straight Plug Adapter Plate Welding Head
The MCU-Micro USB Breadboard 5V Power Supply Module is a compact breakout boa...
The MCU-Micro USB Breadboard 5V Power Supply Module is a compact breakout board designed for interfacing USB signals with custom microcontroller boards. It provides stable 5V power for breadboards, prototyping circuits, and other electronic applications. This module features a 5-pin female B-type connector, allowing easy... -
PMBT2222A (SMD SOT-23 Package) NPN switching transistor - Pack Of 5 Pieces
NPN switching transistor in a small SOT23 (TO-236AB) Surface-Mounted Device (...
NPN switching transistor in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package. Features and benefits : High current (max. 600 mA) Low voltage (max. 40 V) AEC-Q101 qualified Applications : Switching and linear amplification Specifications : Type number Package version Size (mm) Polarity... -
4.7K / 4K7 ohm (472) 5% SMD Resistor 0805 ( Pack of 20 Pieces )
4.7k Ohm 1/8W 0805 package Surface Mount Chip Resistor is a small surface-m...
4.7k Ohm 1/8W 0805 package Surface Mount Chip Resistor is a small surface-mount resistor. It is a thick film resistor with a ceramic body as a substrate. Applications: Consumer Electronics Portable Devices Industrial Applications Power Management DIY mini PCB projects Specifications : Resistance 4.7K ohm... -
LM556/NE556 Dual Timer IC
The LM556 is a dual timer IC, similar to 555 Timer IC but here it has two suc...
The LM556 is a dual timer IC, similar to 555 Timer IC but here it has two such timer devices into a single package. It is considered to be the modern replacement for 555 since it uses the latest CMOS technology. NE555 Timer IC... -
USB Female to 2.54mm Breakout Board with Direct 4P Adapter
The USB Female to 2.54mm Breakout Board with Direct 4P Adapter is a compact a...
The USB Female to 2.54mm Breakout Board with Direct 4P Adapter is a compact and practical module that breaks out a standard USB Type-A female port to 2.54mm pitch pins. It allows easy interfacing with microcontrollers and development boards, making it perfect for prototyping... -
MMBT3906 (SMD SOT-23 Package) PNP Switching Transistor - Pack Of 5 Pieces
Bipolar Transistor (PNP) MMBT3906 Features : Complementary to MMBT3904 Surfa...
Bipolar Transistor (PNP) MMBT3906 Features : Complementary to MMBT3904 Surface Mount device Applications : General purpose Specifications : Type Package Channel Type Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector current - Continuous DC current gain（MIN） DC current gain（MAX） Total Device Dissipation VCBO(V) VCEO(V) VEBO(V) Ic(mA)... -
100K ohm (1003) 5% SMD Resistor 0805 ( Pack of 20 Pieces )
100k Ohm 1/8W 0805 package Surface Mount Chip Resistor is a small surface-m...
100k Ohm 1/8W 0805 package Surface Mount Chip Resistor is a small surface-mount resistor. It is a thick film resistor with a ceramic body as a substrate. Applications: Consumer Electronics Portable Devices Industrial Applications Power Management DIY mini PCB projects Specifications : Resistance 100K ohm... -
4-Pin SPST Tactile Switch SMD (5.2x5.2x3.0mm)
The 4-Pin SPST Tactile Switch SMD is a compact, momentary push button designe...
The 4-Pin SPST Tactile Switch SMD is a compact, momentary push button designed for precision and responsive user interaction. Built with a durable metal construction, it delivers a crisp tactile feedback with a 260g actuation force, ideal for space-constrained designs like handheld devices, control... -
1pF Ceramic Capacitor (Pack of 5)
Ceramic Capacitors are low cost and high speed switching capacitors. They are...
Ceramic Capacitors are low cost and high speed switching capacitors. They are normally used for noise filtering, tuning, coupling and other applications. They can also be found it RC, LC and RLC filters. Ceramic capacitor can switch faster than electrolytic capacitors, but they are... -
CD4027 Dual JK Flip Flop IC
The CD4027 is a Dual JK Flip Flop CMOS IC. It consist of two identical comple...
The CD4027 is a Dual JK Flip Flop CMOS IC. It consist of two identical complementary-symmetry J-K master/slave flip-flops. Each flip-flop has its individual J, K, Set Reset, Clock input signals and buffered Q and Q signals are provided as outputs. The IC has... -
1uF / 1000nF 50V 0805 X7R SMD Capacitor (Pack of 5 Pieces)
This 1uF SMD capacitor uses surface mount technology and comes in a 0805 pack...
This 1uF SMD capacitor uses surface mount technology and comes in a 0805 package. These capacitors have a maximum voltage of 50 Volts, and their tolerance is ±10%. This capacitors offer stability and low losses for resonant circuit applications. Specifications : Capacitance 1uF Tolerance(%) 10 Voltage (V) 50 Dissipation factor... -
10 ohm 5% SMD Resistor 0805 ( Pack of 20 Pieces )
10 Ohm 1/8W 0805 package Surface Mount Chip Resistor is a small surface-mou...
10 Ohm 1/8W 0805 package Surface Mount Chip Resistor is a small surface-mount resistor. It is a thick film resistor with a ceramic body as a substrate. Applications: Consumer Electronics Portable Devices Industrial Applications Power Management DIY mini PCB projects Specifications : Resistance 10 ohm ... -
LM7812 12V Linear Positive Voltage Regulator – TO-220 Package
The 7812CV is a fixed 12V positive voltage regulator from the popular 78xx se...
The 7812CV is a fixed 12V positive voltage regulator from the popular 78xx series. It provides a stable 12V output from a higher input voltage (typically 14V to 35V), making it ideal for power supplies, microcontroller-based systems, and regulated DC power circuits. It includes... -
LM3915 Dot/Matrix Display Driver IC
The LM3915 is an audio-level display driver IC. It offers a simple way to dis...
The LM3915 is an audio-level display driver IC. It offers a simple way to display a logarithmic voltage level using one or more groups of ten LEDs with a minimum of fuss. The LM3915 monolithic IC senses analog voltage levels and drives ten LEDs,... -
10K Ohm 1206 Package 1/4W SMD Resistor 5% Tolerance (Pack of 20 Pieces)
This is 10K Ohm SMD Resistor in a 1206 package is a standard thick film chip ...
This is 10K Ohm SMD Resistor in a 1206 package is a standard thick film chip resistor designed for surface-mount applications. With a power rating of 1/4W and a tolerance of ±5%, This resistor offers a high voltage rating and durability, making it suitable... -
MCT2E Optocoupler/Phototransistor IC
Optocoupler is an important component in electronics and here is MCT2E that i...
Optocoupler is an important component in electronics and here is MCT2E that is a hugely popular optocoupler available in quartz components with such great price. As like other optocouplers, it has an infrared emitting diode that optically controls a phototransistor. The forward voltage of...
Semiconductors & Prototyping Components
Close
Sidebar
Categories
- Development Boards
-
Sensor Modules
- Color Sensors
- Current Sensors
- Distance Sensors
- Fingerprint Sensors
- Flex Sensors
- Flow Sensors
- Gas Sensors
- Hall/Magnet Sensors
- Heartbeat Sensors
- Humidity Sensors
- Temperature/Humidity Sensors
- IR/Motion Sensors
- Light Sensors
- Motion/Tilt Sensors
- PH Sensors
- Pressure Sensors
- Accelerometer and Gyrometer Sensors
- Proximity Sensors
- Rain/Soil Moisture Sensors
- Soil Sensors
- Sound Sensor
- Touch Sensors
- Vibration Sensors
- Voltage Sensors
- Water Level/Flow Sensors
- Weighing Sensors
- RFID Tags and Modules
- Semiconductors & Prototyping Components
- Batteries, Power Supplies & Accessories
- Wireless & IoT Products
- Switches, Relays & Protection
- Lighting & LEDs
- Motors, Drivers & Pumps
- Wires, Cables & Connectors
- Robotics & DIY Learning Kits
- 3D Printers & Parts
- SMD Components
- Electronic Modules
- Drone Components
- Hardware Instruments & Tools
- Displays
- Shop By Brand
- Choosing a selection results in a full page refresh.