-
XL6009 Step Up Down Buck Boost Converter Module
The XL6009 Step Up Down module is one of the widely used module, where ther...
The XL6009 Step Up Down module is one of the widely used module, where there is requirement of having a specific fixed output voltage, even when the input voltage is below or above the required output voltage. This is an automatic Buck Boost Converter.... -
WATTNINE® 3.7V 2200mah Lithium Battery Pack with 3 year warranty
This is a high quality 18650 lithium NMC 3.7V 2200mAh battery pack with BMS...
This is a high quality 18650 lithium NMC 3.7V 2200mAh battery pack with BMS Protection board. The cell has a JST 2-pin connector attached to it so that it can be easily used in portable products like Bluetooth Speakers, FM radios, Flashlights, Toy cars,... -
LM35 Temperature Sensor Original
LM35 is a low cost, linear and precise temperature measuring IC. It gives an ...
LM35 is a low cost, linear and precise temperature measuring IC. It gives an Analog Output Voltage proportional to the temperature it measures. It also does not require any additional calibration circuit to give the output in degree Celsius. It also has less self-heating (0.1... -
10k Ohm 3590S Bourns Precision Multiturn Potentiometer
This 10k Ohm 3590S Bourns Precision Multiturn Potentiometer offers accurate l...
This 10k Ohm 3590S Bourns Precision Multiturn Potentiometer offers accurate linearity and a wide range of adjustment settings, making it perfect for precise control of voltage and current. With its intuitive design and smooth adjustment, this potentiometer is a great choice for a wide... -
220K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 220K ohm carbon film resistors with 1/4 Watt and 5% tole...
This is a set of 10, 220K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
6mmx0.15mm Pure Nickel Strip for 18650 Cells - 1 Meter
This is a 6mmx0.15mm nickel strip suitable for spot welding while building ba...
This is a 6mmx0.15mm nickel strip suitable for spot welding while building battery packs with 18650 or 32650 Lithium Ion/phosphate battery cells. It gets soldered quickly with high tensile tension and low resistivity and provides corrosion resistance over time. Features: Material: Metal Pure (Nickel) Color: Silver Size: 6mm x 0.15mm Length:... -
ESP12E Wireless WiFi Module (ESP8266/NodeMCU)
ESP8266 ESP-12 development Board is an SMT (Surface Mount Technology) based s...
ESP8266 ESP-12 development Board is an SMT (Surface Mount Technology) based small, compact, and bite-sized version of ESP8266. ESP12E SMT Board is well suited for PCB design and saving space. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the... -
DMEGC INR21700 Li-ion 3.7V 4500mAh Rechargable Battery - Original
These are original EV grade 21700 Lithium batteries with 3.7V as nominal Volt...
These are original EV grade 21700 Lithium batteries with 3.7V as nominal Voltage. It has a maximum discharge capacity of 3C and packs in high power density making it suitable for EV battery packs and Solar Farms. Features: Cylindrical design 21700 size for easy... -
2.2 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 2.2 Ω ohm through hole mounting carbon film resistors w...
This is a set of 10, 2.2 Ω ohm through hole mounting carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated... -
8mm LED - Straw Hat Type 1 watt 3V Multicolor LED Light Red & Green
A standard 8mm multicolor (Red and Green) color straw hat type that can be us...
A standard 8mm multicolor (Red and Green) color straw hat type that can be used for indication or visualization purposes. It can be used on breadboard, dot board and PCB. You can also use LED mount to fix them onto casings or enclosures. The longer lead... -
1M Ohm Trimpot Potentiometer (Variable Resistor)
Potentiometer are very important part of electronic circuits as they are use...
Potentiometer are very important part of electronic circuits as they are used across wide range of applications ranging from comparator circuits, voltage control, LED intensity to even volume and fan speed control in our homes. A potentiometer is a variable resistor with three terminals, where Two terminals are connected... -
WATTNINE JBL Flip 4 Battery Replacement Kit - 3.7V 3200mAh High Quality Lipo battery with tools for Home Replacement
This is a high-quality replacement lipo battery from WATTNINE for JBL Flip4 B...
This is a high-quality replacement lipo battery from WATTNINE for JBL Flip4 Bluetooth Speaker. The kit comes with JBL Flip 4 battery and all the required tools for you to open and change the battery by yourself without needing to find a technician. Refer to... -
A2212/6T 2200kV BLDC Drone Motor
The A2212/6T 2200KV BLDC Motor is a 3-phase out-runner type brushless motor, ...
The A2212/6T 2200KV BLDC Motor is a 3-phase out-runner type brushless motor, widely used in drones, quadcopters, and other multirotor applications. This high-speed motor offers efficient performance and smooth operation, making it ideal for aeromodelling and DIY UAV projects. The motor requires an Electronic... -
3 Pin JST XH Male Connector - 2.54mm pitch
This is a 3 pin JST XH Male connector. This is a wire to board connector. It ...
This is a 3 pin JST XH Male connector. This is a wire to board connector. It is very small with mounting height of 9.8 mm. It is a crimp style connector, and a disconnect table type. Its a top entry version. The wires needs to... -
12V 27A Alkaline Battery 27AE-2C5
With continuous voltage supply and long shelf life, this 12V Alkaline battery...
With continuous voltage supply and long shelf life, this 12V Alkaline battery is mainly used in RF Remotes, Burglar Alarms, Car alarm remotes, etc. Specifications Capacity: 57 mAh Voltage: 12 V Diameter: 8 mm Height: 28 mm Chemistry: ALKALINE Package Includes: 1 x 12V 27A Alkaline Battery 27AE-2C5 -
WATTNINE® 12V 3600mAh Lithium Ion Battery Pack with 3 year warranty
This 11.1V 3600mAh Li-ion Rechargeable Battery Pack has a nominal voltage o...
This 11.1V 3600mAh Li-ion Rechargeable Battery Pack has a nominal voltage of 12.6 volts and is a 3s2p battery pack. This battery pack contains 6 cells connected in series and parallel, giving it a capacity of 3600mAh. The battery pack has a built-in BMS that protects... -
MX1508 Dual H Bridge DC Stepper Motor Driver Module with PWM Control
MX1508 Dual H Bridge DC PWM Stepper Motor Driver module is ideal for use in b...
MX1508 Dual H Bridge DC PWM Stepper Motor Driver module is ideal for use in battery-powered smart cars, toy cars, robots. Supply voltage 2V ~ 10V can drive two DC motors or 4-wire 2-phase stepper motors, can achieve forward rotation or reverse rotation, it... -
ESP8266 Adapter Programmer / USB TO UART Converter for ESP8266 ESP-01
It is difficult to Programmer ESP8266 using multiple wires but not with this ...
It is difficult to Programmer ESP8266 using multiple wires but not with this USB to UART/ESP8266 Adapter Programmer. It is an adapter cum converter for ESP-01 Wi-Fi Modules with CH340G Chip that converts the signal from a USB interface to a PC / laptop... -
EGS002 EG8010 + IR2113 DC-AC SPWM Pure Sine Wave Inverter Module
The EGS002 EG8010 + IR2110S Single-Phase Sinusoid Inverter Driver Board is sp...
The EGS002 EG8010 + IR2110S Single-Phase Sinusoid Inverter Driver Board is specifically designed to control single-phase sinusoid inverters. It employs the EG8010 control chip, which integrates advanced features for precise frequency control and waveform generation. The driver board incorporates a range of functions, including... -
Starter Kit with UNO R3, Breadboard, LED, Resistor, Jumper Wires and Power Supply Based on Arduino - Build more than 10 DIY Projects
If you're new to Arduino and want to get started with it, a beginner's kit ca...
If you're new to Arduino and want to get started with it, a beginner's kit can be a great way to begin your journey. Arduino beginner kits typically come with an Arduino board and a variety of components and sensors that you can use... -
PCB Cleaning Solution Spray - 99% IPA
After Soldering or assembly of PCB Boards, a strong residue, dirt and small s...
After Soldering or assembly of PCB Boards, a strong residue, dirt and small solder balls stays in the soldering place of the circuit board. This is merely a dangerous situation as this could lead to failure of the circuit as well as the PCB... -
DMEGC 18650 Li-ion 3200mAh Rechargeable Battery - Original
18650 battery is a Li-ion rechargeable battery with a 3200 mAh Battery Capac...
18650 battery is a Li-ion rechargeable battery with a 3200 mAh Battery Capacity. This is a standard AA or AAA battery. It is very useful for applications that require continuous high current or high current in short bursts like in cameras, DVD players, iPod, etc.... -
IRF3205 N-Channel Power MOSFET
The IRF3205 is an N-channel MOS Field Effect Transistor designed for high cur...
The IRF3205 is an N-channel MOS Field Effect Transistor designed for high current switching applications. It utilizes advanced processing techniques to achieve extremely low on-resistance per silicon area. This feature, combined with the fast switching speed and ruggedized device design, makes the IRF3205 Power... -
Mercury Ball Tilt Switch - 5MM Diameter
In many applications we need to make sure that the system we developed must r...
In many applications we need to make sure that the system we developed must remain in a specific orientation like in robotics or vehicles on the road or big machinery working in dangerous environment. These systems pose a threat to the lives and safety... -
S8050 NPN Transistor
The S8050 transistor is an NPN transistor with excellent maximum gain capabil...
The S8050 transistor is an NPN transistor with excellent maximum gain capability of 400 but normal gain is around 110 so that you can use it in amplifier application. It can have a maximum collector current flow of 700mA and maximum collector power dissipation... -
Illuminated On-Off Round Rocker Switch - 6A 250V (Yellow)
This is a yellow color on-off rocker switch with 6A and 250V current and volt...
This is a yellow color on-off rocker switch with 6A and 250V current and voltage ratings. The yellow led light will be lighted up when the switch is turned on, making it easy to see in the dark or in bad weather. Specifications: Current rating:... -
12mm LDR Light Dependent Resistor
The 12mm LDR Light Dependent Resistor is an essential component for a variety...
The 12mm LDR Light Dependent Resistor is an essential component for a variety of projects. Its light-sensitive properties make it perfect for sensing changes in light intensity, allowing it to be used for applications like automatic lighting control. The advantages of a 12mm LDR... -
2SC5200-O NPN Transistor Toshiba - TO-264 DIP Package
2SC5200 Transistor is an NPN Power Transistor manufactured by Toshiba. It has...
2SC5200 Transistor is an NPN Power Transistor manufactured by Toshiba. It has collector continuous current of 15A and a Collector-Emitter voltage of 230V. The base current of this transistor is about 1.5A and the Emitter base voltage is 5V. Due to its high... -
LM2596 2A Buck Step-down Power Converter Module DC 4-40V to 1.3-37V with LED Voltmeter
The LM2596 2A Buck Step-down Power Converter Module is a high-efficiency DC-D...
The LM2596 2A Buck Step-down Power Converter Module is a high-efficiency DC-DC voltage regulator designed for converting higher DC voltages to lower, adjustable voltages with stable output. It features an onboard LED voltmeter to display input or output voltage, making it ideal for DIY electronics,... -
9V Battery Snap Connector with Alligator Clip
The 9V Battery Snap Connector with Alligator Clips provides a quick and secur...
The 9V Battery Snap Connector with Alligator Clips provides a quick and secure way to connect a 9V battery to various electronic circuits. Featuring insulated alligator clips, it allows easy power transfer for testing, prototyping, and DIY projects. Package Includes: 1 x 9V... -
Soldering Iron/Rod (35W)
This is a 35-Watt Soldering Iron that is best for students and hobbyists. It ...
This is a 35-Watt Soldering Iron that is best for students and hobbyists. It is a general purpose soldering iron where the soldering tip can be changed as per requirements. One can choose a chisel or pointed tip which is available separately and is good for solving the... -
3.3K ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 3.3K ohm carbon film resistors with 1/4 Watt and 1% tole...
This is a set of 10, 3.3K ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This...
All Products
Close
Sidebar
Categories
- Development Boards
-
Sensor Modules
- Color Sensors
- Current Sensors
- Distance Sensors
- Fingerprint Sensors
- Flex Sensors
- Flow Sensors
- Gas Sensors
- Hall/Magnet Sensors
- Heartbeat Sensors
- Humidity Sensors
- Temperature/Humidity Sensors
- IR/Motion Sensors
- Light Sensors
- Motion/Tilt Sensors
- PH Sensors
- Pressure Sensors
- Accelerometer and Gyrometer Sensors
- Proximity Sensors
- Rain/Soil Moisture Sensors
- Soil Sensors
- Sound Sensor
- Touch Sensors
- Vibration Sensors
- Voltage Sensors
- Water Level/Flow Sensors
- Weighing Sensors
- RFID Tags and Modules
- Semiconductors & Prototyping Components
- Batteries, Power Supplies & Accessories
- Wireless & IoT Products
- Switches, Relays & Protection
- Lighting & LEDs
- Motors, Drivers & Pumps
- Wires, Cables & Connectors
- Robotics & DIY Learning Kits
- 3D Printers & Parts
- SMD Components
- Electronic Modules
- Drone Components
- Hardware Instruments & Tools
- Displays
- Shop By Brand
- Choosing a selection results in a full page refresh.