-
Red LED - SMD (0805 Package) - Pack of 50
The Red LED in an SMD (Surface-Mount Device) 0805 package is a compact and ef...
The Red LED in an SMD (Surface-Mount Device) 0805 package is a compact and efficient light-emitting diode, tailored for a variety of applications requiring bright and reliable red light. The 0805 package, measuring approximately 2.0mm x 1.25mm, offers a slightly larger footprint than the... -
470K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 470K ohm carbon film resistors with 1/4 Watt and 5% tole...
This is a set of 10, 470K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
HMC5883L Triple-axis Magnetometer Board
So most of the navigation devices come equipped with a magnetometer which can...
So most of the navigation devices come equipped with a magnetometer which can sense where the strongest magnetic field is coming from i.e. the magnetic north pole of earth and point towards it. The HMC5883 being a magnetometer sensor does the same thing, the sensor is also called... -
Nylon Cable Tie / Wire Tag 200X3mm (pack of 100)
These Nylon Cable Ties / Wire Tags meet the highest industry standards, with ...
These Nylon Cable Ties / Wire Tags meet the highest industry standards, with a 200X3mm size and an ultra-strong tension for secure fastening. Made from durable nylon and capable of holding up to 18 lbs, these cable ties are perfect for a wide range... -
WATTNINE® 3.7V 4400mAh Lithium Battery Pack with 3 year warranty
This is a high quality 18650 lithium NMC 3.7V 4400mAh battery pack with BMS P...
This is a high quality 18650 lithium NMC 3.7V 4400mAh battery pack with BMS Protection board. The cell has a JST 2-pin connector attached to it so that it can be easily used in portable products like Bluetooth Speakers, FM radios, Flashlights, Toy cars,... -
DRV8833 2 Channel DC Motor Driver Module
DRV8833 is a dual H-bridge motor driver IC that can be used for bidirectional...
DRV8833 is a dual H-bridge motor driver IC that can be used for bidirectional control of two brushed DC motors at 2.7 V to 10.8 V. The maximum supply current is limited up to about 1.2 A per channel continuously whereas the peak current rating... -
3.7V 30C 800mAh Lithium-Polymer Rechargeable Battery (YY802535) for Drones
The 3.7V 30C 800mAh Lithium-Polymer (LiPo) Battery (YY802535) combines high c...
The 3.7V 30C 800mAh Lithium-Polymer (LiPo) Battery (YY802535) combines high capacity with a compact form factor, making it suitable for a variety of electronic devices and projects. Its 30C discharge rate ensures high power output, while its rechargeable design provides long-term reliability and cost-effectiveness.... -
BF494 NPN Medium Frequency Transistor
The BF494 NPN Medium Frequency Transistor is an NPN Medium Frequency transist...
The BF494 NPN Medium Frequency Transistor is an NPN Medium Frequency transistor which can be used in low voltage low current applications. It has a gain of 67 to 220 and a transition frequency of 120MHz at IC=1mA and VCE=10V. It can be used... -
SPDT Momentary Rocker Switch - 6A 250V AC
This is a flush mounting SPDT momentary rocker switch with 6A 250VAC current...
This is a flush mounting SPDT momentary rocker switch with 6A 250VAC current ratings. The 3 positions SPDT (Single Pole Double Throw) switch is suitable for DC motors and linear actuators. Package Includes: 1 x SPDT Momentary Rocker Switch - 6A 250V AC -
Red 12mm Round Push Button Self Locking/ Latching Switch - Non Momentary
The PBS-11A is a compact 12mm self-locking push button switch designed for re...
The PBS-11A is a compact 12mm self-locking push button switch designed for reliable ON/OFF control in electronic circuits and DIY projects. With its 2-pin design and durable plastic construction, this switch is lightweight, easy to mount, and suitable for panel installations. The self-locking mechanism... -
200 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 200 ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 200 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
22 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 22 ohm carbon film resistors with 1/4 Watt and 5% tolera...
This is a set of 10, 22 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
MQ-7 Gas Sensor Module for Carbon Monoxide
MQ7 Gas sensor is another one of Metal Oxide Semiconductor (MOS) type Gas Sen...
MQ7 Gas sensor is another one of Metal Oxide Semiconductor (MOS) type Gas Sensor of MQ Gas Sensors family involving MQ 2, MQ 4, MQ 3, MQ 8, MQ 135, etc. It is mainly used to detect Carbon Monoxide. This sensor contains a sensing... -
USB Male to Female Extension Cable (60cms / 1A)
This USB male to female extension cable has a type A male connection on one e...
This USB male to female extension cable has a type A male connection on one end and a type A female connector on the other end. The length of the cable is 2 feet and the current rating is 1A. Package Includes: 1 x USB... -
HTC-1 Digital Hygrometer Thermometer Humidity Meter with Clock LCD Display
HTC-1 Temperature Humidity Meter Digital Hygrometer -50° to +70°C is a premiu...
HTC-1 Temperature Humidity Meter Digital Hygrometer -50° to +70°C is a premium quality product from HTC. All HTC-1 Temperature Humidity Meter Digital Hygrometer -50° to +70°C are manufactured by using quality assured material and advanced techniques, which make them up to the standard in... -
White LED - SMD (1206 Package) - Pack of 50
The White LED in an SMD (Surface-Mount Device) 1206 package is a robust and e...
The White LED in an SMD (Surface-Mount Device) 1206 package is a robust and efficient light-emitting diode designed for applications requiring bright and reliable red light. The 1206 package, measuring approximately 3.2mm x 1.6mm, provides a larger footprint compared to smaller packages, ensuring enhanced... -
Toggle Switch 10A SPDT CENTER OFF 125VDC and 250VAC - CALONIX Panel Mount Switch
The Toggle Switch 10A SPDT CENTER OFF 125VDC and 250VAC by CALONIX is a vers...
The Toggle Switch 10A SPDT CENTER OFF 125VDC and 250VAC by CALONIX is a versatile and reliable switch designed for a wide range of electrical applications. Featuring a Single Pole Double Throw (SPDT) configuration with a center off position, this switch has three terminals:... -
1S 5A NMC Battery Protection Module
This is a 1S protection module bms for the NMC (Lithium Manganese Cobalt Oxi...
This is a 1S protection module bms for the NMC (Lithium Manganese Cobalt Oxide) batteries. This board has the following protective functions from: over-charge, over-discharge, over-current, over-temperature and short-circuit. It is designed to protect lithium-ion/polymer battery for one-cell lithium-ion/polymer battery powered systems, such as... -
30A 4-8V Mini Brushed Electric Speed Controller ESC - No Brake
The 30A 4-8V Mini Brushed ESC is a compact and efficient motor controller...
The 30A 4-8V Mini Brushed ESC is a compact and efficient motor controller designed for brushed DC motors. Ideal for RC vehicles, drones, and robotics projects, this ESC offers reliable performance with advanced safety features. Its lightweight design and wide voltage range make it... -
NTC 47D-15 Thermistor
Thermistor are electronic components that changes their resistance with chang...
Thermistor are electronic components that changes their resistance with change in temperature. As it has a negative thermal coefficient which means the resistance of the thermistor decreases with increase in temperature of the device. NTC 47D-15 Thermistor is a special type of thermistor which... -
450mm PVC Heat Shrink Sleeve for Lithium Battery Pack - 1 Meter (Blue)
This is a blue color 450mm 1 meter PVC Heat Shrink Sleeve for Lithium batte...
This is a blue color 450mm 1 meter PVC Heat Shrink Sleeve for Lithium battery Pack. It can be used to protect, insulate and hold your battery packs to provide stability, electrical insulation, mechanical protection, sealing, and strain relief. Features: Operating Temperature: -10C-+105C; Fit for: AA Battery Pack... -
4mm x 0.12mm Nickel Coated Strip for 18650 Cells - 1 Meter
This is a 4mm x 0.12mm nickel strip suitable for spot welding while building ...
This is a 4mm x 0.12mm nickel strip suitable for spot welding while building battery packs with 18650 or other Lithium-Ion/phosphate battery cells. It gets soldered quickly with high tensile tension and low resistivity and provides corrosion resistance over time. Features and Specifications: Material:... -
4.7K / 4K7 ohm (472) 5% SMD Resistor 0805 ( Pack of 20 Pieces )
4.7k Ohm 1/8W 0805 package Surface Mount Chip Resistor is a small surface-m...
4.7k Ohm 1/8W 0805 package Surface Mount Chip Resistor is a small surface-mount resistor. It is a thick film resistor with a ceramic body as a substrate. Applications: Consumer Electronics Portable Devices Industrial Applications Power Management DIY mini PCB projects Specifications : Resistance 4.7K ohm... -
2-Pin Right Angle JST XH Male Connector - 2.54mm PCB Mount
This 2-pin JST XH male connector is designed for 2.54mm pitch PCBs and offers...
This 2-pin JST XH male connector is designed for 2.54mm pitch PCBs and offers a reliable and compact connection solution for DC power or signal interfacing. Ideal for battery connections, sensor modules, and small electronic devices. Features of 2-Pin JST XH Male Connector: 2-pin... -
DC Motor Fan Blade 3-Wing Fan For Toy Motor Round Curved Blade - 3.6 Inches
This DC Motor Fan Blade shown in the image is a 3-wing fan designed for toy m...
This DC Motor Fan Blade shown in the image is a 3-wing fan designed for toy motors and small DC motor applications. It has a rounded blade shape for smooth airflow, making it ideal for DIY projects, cooling applications, and small electronic devices. Features... -
110mm PVC Heat Shrink Sleeve for Lithium Battery Pack - 1 Meter (Black)
This is a black color 110mm 1 meter PVC Heat Shrink Sleeve for Lithium batt...
This is a black color 110mm 1 meter PVC Heat Shrink Sleeve for Lithium battery Pack. It can be used to protect, insulate and hold your battery packs to provide stability, electrical insulation, mechanical protection, sealing, and strain relief. Features: Operating Temperature: -10C-+105C; Fit for: AA Battery Pack... -
4.7uF 400V Electrolytic Capacitor (Pack of 5)
This 4.7uF electrolytic capacitor is designed for use in high-voltage circuit...
This 4.7uF electrolytic capacitor is designed for use in high-voltage circuits, rated at 400V, making it ideal for applications such as power supplies, audio equipment, and other electronic devices where stable performance is essential. Features: Capacitance: 4.7 microfarads (µF) Voltage Rating: 400 volts (V)... -
ESP8266 I/O Lead Out Adapter Plate Expansion Module for ESP-07 ESP-12E
This ESP8266 I/O adapter plate expansion module is designed to work with ESP-...
This ESP8266 I/O adapter plate expansion module is designed to work with ESP-07 and ESP-12E, driving up to 16 digital pins. The module offers reliable and robust protection against damage from shorts. It enables increased flexibility and faster development times for your projects. -
BS170 N-Channel Switching MOSFET
The BS170N is a small signal N-channel Enhancement Mode MOSFET. It is produce...
The BS170N is a small signal N-channel Enhancement Mode MOSFET. It is produced using the high cell DMOS technology. It provides reliable, fast switching performance and can be used in small servo motor control, power MOSFET gate drivers, and other switching applications. The BS170N... -
LiteWing - ESP32 DIY Drone Kit for Makers and Developers
Drones shouldn’t be complicated or expensive. That’s the core philosophy behi...
Drones shouldn’t be complicated or expensive. That’s the core philosophy behind LiteWing — a ready-to-fly, open-source drone built for everyone from curious beginners to seasoned engineers. This is a DIY kit that has to be assembled by the user. The kit includes a Drone... -
3 Section 26650/26700 Lithium Battery Support Bracket
Product Description of 3 Section 26700 Lithium Battery Support Bracket This i...
Product Description of 3 Section 26700 Lithium Battery Support Bracket This is a 3-section battery holder or battery spacer for the 26700Lithium battery. It provides perfect spacing for your 26700 cells and snap together for easy battery pack assembly. It is characterized by high strength support... -
Audio Jack - 3.5mm TRRS (SMD)
The 3.5mm TRRS (Tip-Ring-Ring-Sleeve) Audio Jack is a surface-mount devic...
The 3.5mm TRRS (Tip-Ring-Ring-Sleeve) Audio Jack is a surface-mount device (SMD) designed for audio and data transmission. This jack is commonly used in headsets, smartphones, audio players, and embedded systems for stereo audio and microphone input. Its compact SMD design makes it ideal for PCB...