The motor is not as accurate as mentioned by the supplier, the supplier mentions 200 steps for a complete revolution, i bought 2 motors and was getting some errors while using them by considering them to complete a full 200 steps for a single revolution. For reference, i was using the DRV8825 stepper motor drivers with the ms1 and ms2 options enabled(i.e 1/8th stepping enabled) which should give me 1600 steps for a full revolution, but after testing it came up to about 768 steps per revolution, not even a full 800 steps, which was very confusing and very weird. But atleast its consistently weird, i.e it was covering a full 768 steps EVERY TIME, so its still works like a stepper motor atleast. in fact the fourth star is just for this weird consistency, furthermore, after running it for half an hour, it got very hot so i would say that its not meant for 3D printers and the cnc projects which work for long hours. overall, for the mentioned price its fine.
The motor is not as accurate as mentioned by the supplier, the supplier mentions 200 steps for a complete revolution, i bought 2 motors and was getting some errors while using them by considering them to complete a full 200 steps for a single revolution. For reference, i was using the DRV8825 stepper motor drivers with the ms1 and ms2 options enabled(i.e 1/8th stepping enabled) which should give me 1600 steps for a full revolution, but after testing it came up to about 768 steps per revolution, not even a full 800 steps, which was very confusing and very weird. But atleast its consistently weird, i.e it was covering a full 768 steps EVERY TIME, so its still works like a stepper motor atleast. in fact the fourth star is just for this weird consistency, furthermore, after running it for half an hour, it got very hot so i would say that its not meant for 3D printers and the cnc projects which work for long hours. overall, for the mentioned price its fine.
Products are good and delivery was also good but not displaying the overall cost after adding the GST tax is very irritating and feels bad and make me to think whether I should buy again from your website/store or not. You should display the product cost separately and also show Taxable amount near the product cost separately along with overall cost including Tax which feels better for purchasing every time. And many products are not available on your store. For eg. Li-ion and LIFEPO4 battery Balancer/Equalizer, 400watt 15 Amp Buck Boost converter, 100k, 5k, 1k multi turn potentiometer , ceramic resistor, aluminium resistor, inverter circuit board kit, CFL inverter circuit board, Computer UPS circuit board, Pure Sine wave fully automatic inverter circuit board 600va, 850va, 1200va, 1250va, Spot welding Pen, Spot welding pcb circuit board kit, Transparent Acrylic enclosure Box cabinets with nuts, bolts and screws for Spot welding Pcb circuit board, Battery Balance charger etc.
Micro NRF24L01+ Power Enhanced 2.4GHz RF Transceiver Module
if you try to fly without sensors it wont fly ,it is unstable so buy that 500rs sensor VL53L1X Time-of-Flight (ToF) Distance Sensor Module
.
Easy installation and easy to calibrate
Lastly I bought products of approximately ₹2,500 and I also ordered 3 generators but as the results that I get better earlier this time was not like that. In 3 generators there was a default with one generator.
😁So I am requesting Quartz component pls do not repeat this mistake with me repeat with me or any customer 😁😁
ESP32 30 Pin CP2102 Development Board with Wi-Fi and Bluetooth
MLX90614 ESF Non-Contact Human Body Infrared Temperature Measurement Module
This is very good product and working good.Firstly I thought that it will not work but when I tried it , it worked like it is original one.
I have ordered a ESP8266 from Quartz components and it's quality is very good.
But the tax and gst is very high.
need to use different lib as driver is different
It is a beautiful thing, though there are two typos (Anoce, Cethode).
CR2032 3V Coin Cell with Wire and Connector (3V 220mAh Lithium Battery)
