I bought 1 m each of red and back. 10 mm2 good quality fine stranded tin coated copper and very flexible. Can carry 60 amps max and good for 24v LFP builds with 60 a bms. Mine was 12v and I had to use 2 in parallel. Short sections needed for lfp builds needs to be flexible to avoid any stress on the bms/ makes the job easy too. Even though expensive not much is needed within the battery and is really worth it. Strongly recommend as a 12v 100 ah battery I purchased elsewhere had hard cables and really a mess. I don't think they were proper DC cables too. Strongly recommend. Thanks a lot.
i use it with arduino ide and make it as a programmer to program new attiny series chip. earlier nano didnt work. this one worked well. you should provide the version of ch340 chip in your product detail
I really love that product because it's working as smooth and can install circuit clearly by mentioned details. Thank you
This was my first time using pi bit still a good experience with a smooth boot of pi OS and I was not aware that the official raspberry pi power supply and active cooler is highly recommended and ignoring these can make it crash or reboot frequently and inevitably and as it was my first time I wasn't aware of it
It's quality is good and packaging was also very good as always they provide a double layer bubble wrap to important components
If you want to make complex projects out if it
You are highly recommended to get a good active or at least a passive cooler
Because during complex projects, we often use the pi until it's limits
Really satisfied by the quality of the board
I've successfully DIY-ed my Ingco drill battery by this battery, making it 5.8Ah from 4Ah.
I've chosen this battery due to its Charge Cycle ~1000 but the resistance is abit higher 26 Ohm.
Overall, it doesn't get hot while using it. Thanks to Quartz components for well packaging and delivery.
I buy only a single product from your site ,But it's good and accurate sharp detecting humans
Thought product is good, it did not meet specs mentioned on the site.I had ordered 3V DC motors and I got 6V DC motors. They wer not running at 3V. No point returning such a small item. I had to buy 3V motors urgently from a local supplier. The packing guy has to be more alert while packing the order.