-
5mm LED - Red Color
A standard 5mm Red color LED that can be used for indication or visualization...
A standard 5mm Red color LED that can be used for indication or visualization purposes. It can be used on breadboard, dot board and PCB. You can also use LED mount to fix them onto casings or enclosures. The longer lead is the positive... -
LDR Sensor (Light Dependent Resistor) - 5mm
This is a LDR sensor with Two Cadmium Sulphide (cds) Photoconductive Cells an...
This is a LDR sensor with Two Cadmium Sulphide (cds) Photoconductive Cells and spectral responses similar to that of the human eye. The Cell resistance falls with increasing light intensity. This photoresistor has application such as smoke detection, Automatic lighting control, batch counting and burglar alarm systems.... -
BC547 NPN Transistor
BC547 is a bi-polar general purpose NPN transistor that is commonly used in s...
BC547 is a bi-polar general purpose NPN transistor that is commonly used in switching and amplifying applications. It can found in relay driver, LED driver and other medium power switching devices and audio or signal amplifiers. The features of the BC547 transistor are Continuous... -
5mm LED - Green Color
A standard 5mm Green color LED that can be used for indication or visualizati...
A standard 5mm Green color LED that can be used for indication or visualization purposes. It can be used on breadboard, dot board and PCB. You can also use LED mount to fix them onto casings or enclosures. The longer lead is the positive and... -
5V 10A Relay Module
Relays are most commonly used switching devices used in electronics. It can b...
Relays are most commonly used switching devices used in electronics. It can be used to switch high current loads easily unlike transistors which are limited by the maximum current that can flow through them and also can’t switch AC loads. This 5V 1A Relay... -
1 Watt White Power LED
LEDs are very useful in projects when you want to display some info to the us...
LEDs are very useful in projects when you want to display some info to the user and also for confirming the states of your device like if it is working fine or if there is some error which might be affecting the working of... -
1K ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 1K ohm carbon film resistors with 1/4 Watt and 1% tolera...
This is a set of 10, 1K ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
Laser Diode - Laser LED Light
This low-cost Laser Diode or Laser Light is commonly used in security devices...
This low-cost Laser Diode or Laser Light is commonly used in security devices and pointers. This Red Laser diode is rated for 5mW with a nominal voltage between 2.2V and 3V. Just like other LED Diodes the Laser Diode should also be used with... -
5mm LED - Blue Color
A standard 5mm Blue color LED that can be used for indication or visualizatio...
A standard 5mm Blue color LED that can be used for indication or visualization purposes. It can be used on breadboard, dot board and PCB. You can also use LED mount to fix them onto casings or enclosures. The longer lead is the positive and... -
Resistor Combo Kit (30 values, 5 each - 150 resistors)
Quarter Watt (1/4W) resistors are the most used type of resistors that are us...
Quarter Watt (1/4W) resistors are the most used type of resistors that are used in simple electronic projects and DIY hobbyist projects. They come with long pliable leads which you can use to either plug in the breadboard holes or can be easily soldered... -
5mm LED - White Color
A standard 5mm white color LED that can be used for indication or visualizati...
A standard 5mm white color LED that can be used for indication or visualization purposes. It can be used on breadboard, dot board and PCB. You can also use LED mount to fix them onto casings or enclosures. The longer lead is the positive... -
LM7805 - 5V Positive Voltage Regulator
LM7805 is one of the most commonly used Positive Regulator in Electronic circ...
LM7805 is one of the most commonly used Positive Regulator in Electronic circuits to lower down the voltage from the higher input voltage and it provides a regulated output of +5V with 2% regulation. This regulator has a ~2.5V linear drop-out. That means it must... -
5mm LED - Yellow Color
A standard 5mm Yellow color LED that can be used for indication or visualizat...
A standard 5mm Yellow color LED that can be used for indication or visualization purposes. It can be used on breadboard, dot board and PCB. You can also use LED mount to fix them onto casings or enclosures. The longer lead is the positive and... -
1K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 1k ohm carbon film resistors with 1/4 Watt and 5% tolera...
This is a set of 10, 1k ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and... -
SPDT 5V PCB Mount Relay - Sugar cube 5 pin
This is the 5V relay most commonly used as switching device in electronic cir...
This is the 5V relay most commonly used as switching device in electronic circuits. It is mainly used in Commonly switching circuits, For Home Automation projects to switch AC loads, To Control (On/Off) Heavy loads at a pre-determined time/condition, Used in safety circuits to... -
RGB LED - 5mm - Common Cathode
The 4 leg RGB LED is an ideal component that can be used in projects that r...
The 4 leg RGB LED is an ideal component that can be used in projects that require multicolor displays. A single RGB LED serves the purpose of three individual different colour LEDs. The RGB name stands for Red colour, Blue colour, and Green colour... -
10K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 10K ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 10K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
IRFZ44 N-Channel MOSFET
A metal–oxide–semiconductor field-effect transistor (MOSFET) is a field-effec...
A metal–oxide–semiconductor field-effect transistor (MOSFET) is a field-effect transistor where the voltage determines the conductivity of the device. It is used for switching or amplifying signals. The ability to change conductivity with the amount of applied voltage can be used for amplifying or switching... -
2N2222 NPN Switching Transistor
The 2N2222A is a common NPN Bipolar Junction Transistor (BJT) is used for gen...
The 2N2222A is a common NPN Bipolar Junction Transistor (BJT) is used for general purpose low power amplifying or switching actions. As it is an NPN transistor, so collector and emitter will be left open when no signal is at the base and when... -
1N4007 General Purpose Rectifier Diode 1A
The 1N4007 is the most commonly used rectifier diode. It is commonly used in ...
The 1N4007 is the most commonly used rectifier diode. It is commonly used in rectifier circuits, protection circuits and regulator circuits. The lead near to the silver line is the cathode and the other lead is anode, current is allowed to flow only form... -
10K Ohm Preset Potentiometer (POT)
A potentiometer is a variable resistor with three terminals, where Two termin...
A potentiometer is a variable resistor with three terminals, where Two terminals are connected to a resistive element and the third terminal is connected to an adjustable round wiper. The position of the wiper determines the output voltage. This 10K ohm compact linear Potentiometer with plastic dust-cap is suitable for... -
220 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 220 ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 220 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
12V SPDT Relay
This is the 12V relay most commonly used switching device in electronics. It ...
This is the 12V relay most commonly used switching device in electronics. It is commonly used in Home Automation projects to switch AC loads, To Control (On/Off) Heavy loads at a pre-determined time/condition, Used in safety circuits to disconnect the load from supply in... -
10uF 50V Electrolytic Capacitor
This 10uF 50V capacitor is a good quality radial polarized Electrolytic capac...
This 10uF 50V capacitor is a good quality radial polarized Electrolytic capacitor. Electrolytic capacitors are widely used in switched-mode power supplies, DC-DC converters, and power supplies. This capacitor has a long life, low leakage current, and wide operating range. Product Description of 10uF 50V Electrolytic Capacitor Features... -
10K ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 10K ohm carbon film resistors with 1/4 Watt and 1% toler...
This is a set of 10, 10K ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
220 ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 220 ohm carbon film resistors with 1/4 Watt and 1% toler...
This is a set of 10, 220 ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
100uF 25V Radial Electrolytic Capacitor
Electrolytic capacitors are widely used in switched-mode power supplies, DC-D...
Electrolytic capacitors are widely used in switched-mode power supplies, DC-DC converters and power supplies. These capacitor are available in high capacitance and voltage rating than ceramic capacitors. The longer lead is the positive lead and the shorter lead is the negative lead, reversing the... -
10K Ohm Potentiometer - Large 3 Pin 15mm Potentiometer
Potentiometers are very useful in changing the electrical parameters of a sys...
Potentiometers are very useful in changing the electrical parameters of a system. It is a resistive type potentiometer which you can use to change RC constant of a circuit, changing the voltage level at comparator, changing the audio output volume, changing the brightness of... -
RGB LED 5mm with 2 pin - Auto Flashing
An RGB LED (5mm, 2-pin, Auto-Flashing) is a special type of LED that cycles t...
An RGB LED (5mm, 2-pin, Auto-Flashing) is a special type of LED that cycles through different colors automatically without requiring an external controller. Since it has only two pins, the internal circuitry handles the color changes and flashing effects. Advantages of LED: lower power... -
10K Ohm Potentiometer
Potentiometers are very useful in changing the electrical parameters of a sys...
Potentiometers are very useful in changing the electrical parameters of a system. It is a single turn 10k Potentiometer with a rotating knob. These potentiometers are also commonly called as a rotary potentiometer or just POT in short. These three-terminal devices can be used to vary the resistance between 0 to... -
2 Channel 5V Relay Module With Optocoupler Protection
Relays are important part of any electrical and electronic circuits. We use r...
Relays are important part of any electrical and electronic circuits. We use relays in control applications, switching applications, circuit protection applications and load transfer applications. Relays are also used to provide electrical isolation between two circuits. This 2-channel Relay module comes with Optocoupler protection... -
100000 pF (0.1uF) 50V Ceramic Capacitor (Pack of 5)
Ceramic Capacitors are low cost and high speed switching capacitors. They are...
Ceramic Capacitors are low cost and high speed switching capacitors. They are normally used for noise filtering, tuning, coupling and other applications. They can also be found it RC, LC and RLC filters. Ceramic capacitor can switch faster than electrolytic capacitors, but they are...
Components
Core electronic components to build, modify, and optimize circuits. Includes resistors, capacitors, inductors, transistors, diodes & power semiconductors. Essential for filtering, power regulation, signal amplification & logic control.
Close
Sidebar
Categories
- Development Boards
-
Sensor Modules
- Color Sensors
- Current Sensors
- Distance Sensors
- Fingerprint Sensors
- Flex Sensors
- Flow Sensors
- Gas Sensors
- Hall/Magnet Sensors
- Heartbeat Sensors
- Humidity Sensors
- Temperature/Humidity Sensors
- IR/Motion Sensors
- Light Sensors
- Motion/Tilt Sensors
- PH Sensors
- Pressure Sensors
- Accelerometer and Gyrometer Sensors
- Proximity Sensors
- Rain/Soil Moisture Sensors
- Soil Sensors
- Sound Sensor
- Touch Sensors
- Vibration Sensors
- Voltage Sensors
- Water Level/Flow Sensors
- Weighing Sensors
- RFID Tags and Modules
- Semiconductors & Prototyping Components
- Batteries, Power Supplies & Accessories
- Wireless & IoT Products
- Switches, Relays & Protection
- Lighting & LEDs
- Motors, Drivers & Pumps
- Wires, Cables & Connectors
- Robotics & DIY Learning Kits
- 3D Printers & Parts
- SMD Components
- Electronic Modules
- Drone Components
- Hardware Instruments & Tools
- Displays
- Shop By Brand
- Choosing a selection results in a full page refresh.