-
22uF 50V Radial Electrolytic Capacitor
Electrolytic capacitors are widely used in switched-mode power supplies, DC-D...
Electrolytic capacitors are widely used in switched-mode power supplies, DC-DC converters and power supplies. These capacitor are available in high capacitance and voltage rating than ceramic capacitors. The longer lead is the positive lead and the shorter lead is the negative lead, reversing the... -
Piezoelectric Sensor/Transducer/Buzzer - 35mm Diameter
This is a piezoelectric disk which is used to pickup sound from musical instr...
This is a piezoelectric disk which is used to pickup sound from musical instruments and devices. This is made up of selected copper which ensures excellent conductivity and long lasting use. As it gives out analog output you can connect the output to comparator... -
E18-D80NK IR Proximity Sensor Switch
With a long detection range of 3-80cm, The E18-D80NK Adjustable Infrared Sens...
With a long detection range of 3-80cm, The E18-D80NK Adjustable Infrared Sensor Switch is a set of transmitter and receiver in a single photoelectric switch-based sensor. The detection distance can be adjusted according to the demand from the 3-80cm as per the application demand. The... -
33pF Ceramic Capacitor (Pack of 5)
Ceramic Capacitors are low cost and high speed switching capacitors. They are...
Ceramic Capacitors are low cost and high speed switching capacitors. They are normally used for noise filtering, tuning, coupling and other applications. They can also be found it RC, LC and RLC filters. Ceramic capacitor can switch faster than electrolytic capacitors, but they are... -
Rechargeable AA Battery 3.7V 1100mAh - (Pack of 2)
This is a rechargeable Li-ion battery from Power Bee with a nominal operating...
This is a rechargeable Li-ion battery from Power Bee with a nominal operating voltage of 3.7V and a capacity of 1100mAh. Please note that these cells are not a replacement of Ni-Mh cells like Duracell or every day. With around 500 charge cycles and an operating... -
ATmega8A Microcontroller IC - 28 Pin DIP Package
The ATmega8A Microcontroller is a 32-pin microcontroller with 8-bit AVR Archi...
The ATmega8A Microcontroller is a 32-pin microcontroller with 8-bit AVR Architecture. The controller has an in-built internal oscillator and watchdog timer. It has 32kB of Flash memory and 512 bytes of EEPROM. ATmega8A Microcontroller has an operating voltage from 2.7V to 5.5V hence suitable... -
ZMPT101B Single Phase AC Voltage Sensor Module
The ZMPT101B AC Voltage Sensor Module is a high-precision voltage sensor desi...
The ZMPT101B AC Voltage Sensor Module is a high-precision voltage sensor designed for accurate AC voltage measurement in various DIY and electrical projects. It is compatible with platforms like Arduino, ESP8266, and Raspberry Pi, and provides essential features such as high galvanic isolation, wide... -
Pair of M2.5 Hex Nuts
M2.5 nuts are typically used in the manufacture of small items of electrical ...
M2.5 nuts are typically used in the manufacture of small items of electrical equipment, laptops, cameras and mobile phones. The “M” designation for metric nuts indicates the inner diameter of the nut in millimeters, so for an M2 nut, the inner diameter is 3mm. However, in practice the actual... -
LM393 Motor Speed Measuring Sensor Module
Speed sensing is very important in industrial applications in which process c...
Speed sensing is very important in industrial applications in which process control require precise speed control of production belts to control the rate of manufacturing and also in robotics and autonomous system to determine the exact position of the arm or the tool and... -
50K Ohm 0.5W (503) Multiturn Variable Resistor Trimpot Trimmer
Trimpot is a high accuracy variable resistor and pcb mountable with 3 termina...
Trimpot is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is rotated. For higher adjustment resolutions, multi-turn trimpots are used. The amount of turns varies between roughly 5-25, but 5, 12... -
3mm Metal LED Holder - Panel mount
This is a 3mm metal LED holder to keep LEDs in place for a clean look in pr...
This is a 3mm metal LED holder to keep LEDs in place for a clean look in projects where LEDs are used as indicator lights. These are panel mount LED holders which provide a firm grip for 3mm LEDs. Package Includes: 1 x 3mm Metal... -
XL4005 DC-DC 5-32V Adjustable Step Down 5A Buck Power Supply Module
The XL4005 Power supply module is based on the XL4005 Dc-Dc converter IC. The...
The XL4005 Power supply module is based on the XL4005 Dc-Dc converter IC. The module can step-down and regulate a voltage from 0.8V to 32V based on the position of the potentiometer. The Potentiometer used here is a 25-turn potentiometer that provides easy adjustment of... -
74HC00 Quad 2-input NAND Gate IC - 14 Pin DIP Package
The 74HC00 is an IC with four NAND gates. Each gate has its own two inputs, s...
The 74HC00 is an IC with four NAND gates. Each gate has its own two inputs, so the IC is normally referred to as a Quad 2-input NAND gate IC. Though all the gates are powered from a common rail, they operate independently performing... -
TDA2003A/UTC2003 Audio Amplifier IC (TO-220)
Audio Amplifiers are the backbone of any music system as it the component whi...
Audio Amplifiers are the backbone of any music system as it the component which enables the audio input coming from the mic or audio player, to be played on Speakers or any other equipment. TDA2003 is a general-purpose 10W amplifier IC that can be... -
A7 / 1N4007 SMD Diode (Pack of 10)
A7 Diode is nothing but SMD version of 1N4007 Diode and it's smaller in size ...
A7 Diode is nothing but SMD version of 1N4007 Diode and it's smaller in size of M7 diode. Features of A7 Reverse voltage 50 to 1000 Volts with Forward Current of 1.0 Ampere. Features : Low forward voltage drop R-1 High current capability High capability... -
WATTNINE® 12V 2200mAh Rechargeable Lithium Battery Pack with Warranty for GPS, CCTV, Industrial and Commercial Application
This Li-ion Rechargeable Battery Pack has a nominal voltage of 11.1V volts an...
This Li-ion Rechargeable Battery Pack has a nominal voltage of 11.1V volts and is a 3s battery pack. This battery pack contains three cells connected in series, giving it a capacity of 2200mAh. The battery pack has a built-in BMS that protects the battery from overcharging, ... -
1A Glass Fuse - 5x20mm
It is a 1A Glass fuse. It is an electrical safety device that operates to pro...
It is a 1A Glass fuse. It is an electrical safety device that operates to provide overcurrent protection to an electrical circuit. It measures approximately 20 mm long by 5 mm in diameter (5x20mm) making it compatible with 5x20 fuse holders. Because the fuse is... -
RTC Crystal oscillator (YT-32.768Khz)
This is a RTC Cylindrical Crystal oscillator (YT-32.768Khz). The crystal osci...
This is a RTC Cylindrical Crystal oscillator (YT-32.768Khz). The crystal oscillator is used in microprocessor clock, network card, various consumer electronics, etc. Specifications : Frequency Range 32.768Khz Tolerance(%) 20 Operating Temperature Range -10C to +60C Storage condition (Deg C) -20... -
18650 Li-ion 3000mAh Rechargeable Battery - Winway
The 18650 Li-ion 3000mAh Rechargeable Battery by Winway is a high-capacity cy...
The 18650 Li-ion 3000mAh Rechargeable Battery by Winway is a high-capacity cylindrical lithium-ion cell designed for a wide range of electronic applications. It offers a stable 3.7V nominal voltage and 11.1Wh energy output, making it suitable for flashlights, power banks, robotics, DIY electronics, and other... -
0.28 Inch 0-100V Three Wire DC Voltmeter
This 0.28 Inch 0-100V Three Wire DC Voltmeter is designed to measure DC volta...
This 0.28 Inch 0-100V Three Wire DC Voltmeter is designed to measure DC voltages from 0 to 100V with a compact, bright red LED display. Its small size and lightweight design make it ideal for battery monitoring, small electronics, and portable projects. Features: Compact... -
12.6V 2A Wall Mount 3S Li-ion Battery Charger with CC/CV
This 12V 2 Amp Power Adapter takes an AC INPUT of 100-240V and gives 12.6V 2A...
This 12V 2 Amp Power Adapter takes an AC INPUT of 100-240V and gives 12.6V 2A DC output. Comes in black color and the plastic case is ABS+ pure PC Fireproof materials. Applications: Lithium ion Battery Charger (SMPS) 12V Lithium Ion LiFePo4 Battery Pack... -
DC-DC 6-18V to 5V 3A USB Output Step Down Buck Converter Module
The DC-DC 6-18V to 5V 3A USB Output Step Down Buck Converter is an efficient ...
The DC-DC 6-18V to 5V 3A USB Output Step Down Buck Converter is an efficient solution for powering your USB devices from a wide voltage range. Capable of stepping down from 6V to 18V input voltage to a stable 5V output at up to 3A,... -
1000KV High-Voltage Step-Up Power Module
The 1000KV Step-Up Power Module is a high-voltage boost converter designed fo...
The 1000KV Step-Up Power Module is a high-voltage boost converter designed for generating extremely high voltages from a low DC input. It is commonly used in scientific experiments, high-voltage ignition systems, ion generators, and electronic DIY projects. The module efficiently steps up 3V-6V DC input... -
Metasol 25 watt BIT FLAT Nickel Plated 3mm Soldering Gun Bit TIP
Package Includes: 1 x Metasol 25 watt BIT
Package Includes: 1 x Metasol 25 watt BIT -
3 Pin PCB Mount Terminal Block (Screw type) - 5mm Pitch (Black)
3 Pin 5mm Pitch Plug-in Screw Terminal Block Connector is a type of electrica...
3 Pin 5mm Pitch Plug-in Screw Terminal Block Connector is a type of electrical connector, frequently used to connect wires to the PCB. The connector has a screw in each pin to fasten the wire securely. It has tin-plated brass for pin header and... -
ATmega328P-PU Microcontroller IC - 28 Pin DIP Package
ATmega328P Microcontroller is the most widely used standalone Atmega IC for e...
ATmega328P Microcontroller is the most widely used standalone Atmega IC for electronics projects. It can be connected to an Atmega328 board as a replacement for an Arduino. However, if you are planning to replace the Arduino chip then we can provide you Atmega328p with the... -
US-100 Ultrasonic Sensor Distance Measuring Module with Temperature Compensation
This is the US-100 Ultrasonic Sensor Distance Measuring Module with Temperatu...
This is the US-100 Ultrasonic Sensor Distance Measuring Module with Temperature Compensation. The US-100 Ultrasonic Sensor can measure or detect the object in the range of 2 cm to 450 cm distance. This US100 module has 2.4V to 4.5V wide voltage input range, the static... -
Float Switch Industrial Water Level Control 220VAC - 2 Meter Cable
This Float Switch Industrial Water Level Control measures liquid levels and t...
This Float Switch Industrial Water Level Control measures liquid levels and turns a 220VAC circuit on or off accordingly. With a 2-meter cable length, it can easily accommodate various water tank sizes in industrial settings. Its reliable midpoint detection ensures precision and accuracy. ... -
Type-C 2S 8.4V Multi-Cell Step-Up Boost Lithium Battery Charger Module
The Type-C Multi-Cell Step-Up Boost Charger Module is designed for charging 2...
The Type-C Multi-Cell Step-Up Boost Charger Module is designed for charging 2-cell (2S) lithium-ion or lithium-polymer battery packs by boosting standard 5V USB Type-C input to a stable 8.4V charging voltage. Featuring built-in protection and efficient DC-DC conversion, this module is ideal for DIY... -
NE5532 - Low Noise Dual Op-Amp IC - DIP-8 Package
NE5532 is a low noise dual op-amp IC i.e., the output of these devices will h...
NE5532 is a low noise dual op-amp IC i.e., the output of these devices will have lower distortion values. It has specified maximum limits for equivalent input noise voltage. The equivalent Input Noise voltage for this Op-Amp is around 5nV/Hz at 1kHz. It has... -
9V 1A DC Power Adapter - High Quality SMPS Power Supply with Warranty
This is a high quality reliable AC to DC 9V Adapter rated for 1A. The adapter...
This is a high quality reliable AC to DC 9V Adapter rated for 1A. The adapter has a standard DC jack for output and comes with warranty of 6 months. 9V 1A DC Power Supply Adapter Charger Specifications : Brand: Wattnine Output Voltage: 9V Output... -
150mm PVC Heat Shrink Sleeve for Lithium Battery Pack - 1 Meter (Blue)
This is a blue color 150mm 1 meter PVC Heat Shrink Sleeve for Lithium batt...
This is a blue color 150mm 1 meter PVC Heat Shrink Sleeve for Lithium battery Pack. It can be used to protect, insulate and hold your battery packs to provide stability, electrical insulation, mechanical protection, sealing, and strain relief. Features: Operating Temperature: -10C-+105C; Fit for: AA Battery...
Best Selling Products
Close
Sidebar
Categories
- Development Boards
-
Sensor Modules
- Color Sensors
- Current Sensors
- Distance Sensors
- Fingerprint Sensors
- Flex Sensors
- Flow Sensors
- Gas Sensors
- Hall/Magnet Sensors
- Heartbeat Sensors
- Humidity Sensors
- Temperature/Humidity Sensors
- IR/Motion Sensors
- Light Sensors
- Motion/Tilt Sensors
- PH Sensors
- Pressure Sensors
- Accelerometer and Gyrometer Sensors
- Proximity Sensors
- Rain/Soil Moisture Sensors
- Soil Sensors
- Sound Sensor
- Touch Sensors
- Vibration Sensors
- Voltage Sensors
- Water Level/Flow Sensors
- Weighing Sensors
- RFID Tags and Modules
- Semiconductors & Prototyping Components
- Batteries, Power Supplies & Accessories
- Wireless & IoT Products
- Switches, Relays & Protection
- Lighting & LEDs
- Motors, Drivers & Pumps
- Wires, Cables & Connectors
- Robotics & DIY Learning Kits
- 3D Printers & Parts
- SMD Components
- Electronic Modules
- Drone Components
- Hardware Instruments & Tools
- Displays
- Shop By Brand
- Choosing a selection results in a full page refresh.