-
NRF51822 BLE / Bluetooth 4.0 Development Board
NRF51822 is a 2.4GHz Bluetooth 4.0 Development module that supports BLE (Blue...
NRF51822 is a 2.4GHz Bluetooth 4.0 Development module that supports BLE (Bluetooth Low Energy). This Nordic Bluetooth Beacon has the nRF51822 on-board chip which is an ARM Cortex M0 32-bit processor with a multi-protocol RF transceiver. You can also check out other Bluetooth modules... -
RG316 SMA Male to Female Extension Cable - 20cm
The RG316 SMA Male to Female Extension Cable is a high-quality coaxial cable ...
The RG316 SMA Male to Female Extension Cable is a high-quality coaxial cable designed for extending SMA connections in RF applications. It offers low signal loss, flexibility, and durability, making it ideal for antennas, modems, routers, RF modules, and wireless communication systems. The cable... -
Jiabaida (JBD) Li-ion 20S 72V 40A Battery Management System - BMS Protection Board
Jiabaida (JBD) Li-ion 20S 72V 40A BMS is a robust Battery Management System d...
Jiabaida (JBD) Li-ion 20S 72V 40A BMS is a robust Battery Management System designed for 20-cell Li-ion battery packs (72V nominal). It provides complete protection with advanced circuitry to safeguard against overcharging, over-discharging, overcurrent, and short circuits. Supporting same-port charging and discharging, this BMS... -
SG3525A Pulse Width Modulator IC - DIP-16 Package
The SG3525A is a high-performance pulse width modulator (PWM) controller IC d...
The SG3525A is a high-performance pulse width modulator (PWM) controller IC designed for switch-mode power supply (SMPS) and DC-DC converter applications. It integrates all the necessary functions for regulating the output voltage and current, including an oscillator, error amplifier, PWM comparator, and output drivers. With... -
4mm Transparent Industrial Grade Heat Shrink Sleeve - 1 Meter
The 4mm Transparent Industrial Grade Heat Shrink Sleeve is ideal for insulati...
The 4mm Transparent Industrial Grade Heat Shrink Sleeve is ideal for insulating small to medium-gauge wires. Its transparent design makes it useful for battery wires, connectors, and DIY electronics where visibility of the connection is important. The sleeve shrinks evenly to provide long-lasting insulation... -
Single Core 2.5 sqmm Red Electrical Cable Wire For Domestic and Industries - 1m PVC FR Insulated Cable
This 1100V Flame Retardant PVC Insulated Cable is a high-quality electrical c...
This 1100V Flame Retardant PVC Insulated Cable is a high-quality electrical cable designed for safe and efficient power transmission. With 1100V voltage rating, it is suitable for a wide range of electrical applications, ensuring reliable performance and safety in both residential and industrial settings.... -
M3 x 8mm Phillips Head Bolt (Pack of 4)
This M3 x 8mm Phillips head bolt offers reliable fastening with convenient in...
This M3 x 8mm Phillips head bolt offers reliable fastening with convenient installation using a standard Phillips screwdriver. Designed for strong grip and easy tightening, it is ideal for compact mechanical and assembly applications. Features: Material: Steel Thread Size: M3 Length: 8mm Head Type:... -
WATTNINE® 3.7V 6400mAh Rechargeable Lithium Battery Pack with 1 Year Warranty for GPS, CCTV, Industrial and Commercial Application
This Li-ion Rechargeable Battery Pack has a nominal voltage of 3.7V and is a ...
This Li-ion Rechargeable Battery Pack has a nominal voltage of 3.7V and is a 1S2P battery pack. This battery pack contains two high-capacity cells connected in a 1-series 2-parallel configuration, giving it a total capacity of 6400mAh (6.4Ah). The battery pack has a built-in Battery... -
190mm PVC Heat Shrink Sleeve for Lithium Battery Pack - 1 Meter (Cool Green)
This is a green color 190mm 1 meter PVC Heat Shrink Sleeve for Lithium batt...
This is a green color 190mm 1 meter PVC Heat Shrink Sleeve for Lithium battery Pack. It can be used to protect, insulate and hold your battery packs to provide stability, electrical insulation, mechanical protection, sealing, and strain relief. Features: Operating Temperature: -10C-+105C; Fit for: AA Battery... -
470 Ohm 1206 Package 1/4W SMD Resistor 5% Tolerance (Pack of 20 Pieces)
This is 470 Ohm SMD Resistor in a 1206 package is a standard thick film chip ...
This is 470 Ohm SMD Resistor in a 1206 package is a standard thick film chip resistor designed for surface-mount applications. With a power rating of 1/4W and a tolerance of ±5%, This resistor offers a high voltage rating and durability, making it suitable... -
WATTNINE® 14.4V 2600mAh Rechargeable 4S Lithium Battery Pack with Protection (includes BMS & DC pin)
This is a 4S Lithium Battery Pack built using 2600mAh 18650 cells. All the ce...
This is a 4S Lithium Battery Pack built using 2600mAh 18650 cells. All the cells are connected in series and thus provide a nominal output voltage of 14.4 V volts. The battery pack consists of an in-built BMS which ensures safe operation of the... -
HIGH FLY 11.1V 1000mAh 3S 30C Lithium-Polymer Rechargeable Battery
The HIGH FLY 11.1V 1000mAh 3S 30C Lithium-Polymer Battery delivers compact po...
The HIGH FLY 11.1V 1000mAh 3S 30C Lithium-Polymer Battery delivers compact power with high efficiency, perfect for smaller drones and vehicles. Its 3-cell (3S) setup and 30C discharge rate ensure stable 11.1V output with a continuous current supply of up to 30A. With a... -
SYD1230 12mm 5mW Line Laser Module – Red
The SYD1230 is a 12mm 5mW red line laser module designed for applications req...
The SYD1230 is a 12mm 5mW red line laser module designed for applications requiring a straight, visible laser line. It is widely used in industrial alignment, laser level instruments, positioning systems, and DIY electronics projects. With its stable output power and compact metal housing,... -
WATTNINE 14.6V 2A Wall Mount 4S LFP Lithium Battery Charger with CC/CV
The WATTNINE 14.6V 2A Wall Mount 4S LFP Lithium Battery Charger with CC/CV is...
The WATTNINE 14.6V 2A Wall Mount 4S LFP Lithium Battery Charger with CC/CV is a reliable and efficient charger for 4-cell (4S) LiFePO₄ battery packs. It uses Constant Current / Constant Voltage charging, which first charges at a fixed current and then maintains a... -
ADUM3160 USB to USB Digital Signal Audio Power Isolator Module 1500V
The USB2.0 ADUM3160 Digital Signal Audio Power Isolator is a highly adaptable...
The USB2.0 ADUM3160 Digital Signal Audio Power Isolator is a highly adaptable solution for USB 2.0 interfaces. With an impressive isolation voltage of 2500V and the added isolation of 1500V for the power module, it ensures complete electrical separation between your host computer's USB... -
AS608 Optical Fingerprint Sensor Module
The AS608 Optical Fingerprint Sensor Module is a compact and reliable biometr...
The AS608 Optical Fingerprint Sensor Module is a compact and reliable biometric sensor designed for fingerprint recognition and storage applications. Utilizing optical sensing technology, the AS608 module offers precise and secure fingerprint capture with fast matching and high accuracy. It is ideal for use in... -
YS37-555 12V DC Gear Motor - 200RPM
The YS37-555 is a DC 12V high-torque geared motor designed for applications r...
The YS37-555 is a DC 12V high-torque geared motor designed for applications requiring stable and efficient motion control. With a reduction gearbox, it delivers 200 RPM while maintaining high torque, making it ideal for robotics, automation, and DIY mechanical projects. The DC motor operates at... -
7S 24V 40A BMS for Lithium Ion NMC Battery With Cell Balancing (Common Port)
A BMS or protection board is any electronic control circuit that monitors, ma...
A BMS or protection board is any electronic control circuit that monitors, manages, and regulates the charging and discharging of any rechargeable battery (cell or combination of cell called battery). The lithium-ion batteries can be used only in specified conditions called safe operating area,... -
M3.9 X 13mm Stainless Steel CSK Self-Drilling Screw(Pack of 10)
This M3.9 x 13mm countersunk (CSK) self-drilling screw is made of high-qualit...
This M3.9 x 13mm countersunk (CSK) self-drilling screw is made of high-quality stainless steel, offering excellent corrosion resistance and durability. It features a sharp drill tip for easy penetration into metal, wood, and plastic without the need for pre-drilling, making it ideal for quick... -
24V 3A SMPS Driver – Metal Enclosed Power Supply for LED Strip Lights
The 24V 3A SMPS Driver is a metal-enclosed switching power supply designe...
The 24V 3A SMPS Driver is a metal-enclosed switching power supply designed for LED strip lights, automation systems, and other DC-powered applications. With a rugged metal casing and air vents, it ensures efficient heat dissipation and durability for long-term operation. The stable 24V DC output... -
230mm PVC Heat Shrink Sleeve for Lithium Battery Pack - 1 Meter (Cool Green)
This is a green color 230mm 1 meter PVC Heat Shrink Sleeve for Lithium batt...
This is a green color 230mm 1 meter PVC Heat Shrink Sleeve for Lithium battery Pack. It can be used to protect, insulate and hold your battery packs to provide stability, electrical insulation, mechanical protection, sealing, and strain relief. Features: Operating Temperature: -10C-+105C; Fit for: AA Battery... -
128mm PVC Heat Shrink Sleeve for Lithium Battery Pack - 1 Meter (Cool Green)
This is a green color 128mm 1 meter PVC Heat Shrink Sleeve for Lithium batt...
This is a green color 128mm 1 meter PVC Heat Shrink Sleeve for Lithium battery Pack. It can be used to protect, insulate and hold your battery packs to provide stability, electrical insulation, mechanical protection, sealing, and strain relief. Features: Operating Temperature: -10C-+105C; Fit for: AA Battery... -
3S 15A Lithium Battery Protection BMS Module for 3.7V NMC cells
The 3S 15A Lithium Battery Protection BMS Module is specifically designed for...
The 3S 15A Lithium Battery Protection BMS Module is specifically designed for 3.7V NMC cell packs arranged in a 3-series configuration. This module provides comprehensive protection by preventing overcharge, over-discharge, overcurrent, and short circuits, ensuring the safety and optimal performance of your battery pack.... -
M3 X 10mm Male to Female Nickel Plated Brass Hex Threaded Pillar Standoff Spacer (Pack of 4)
The M3 X 10mm Male to Female Nickel Plated Brass Hex Threaded Pillar Standoff...
The M3 X 10mm Male to Female Nickel Plated Brass Hex Threaded Pillar Standoff Spacer is a high-quality nickel-plated brass standoff designed for securely mounting PCBs and other components in various DIY projects. It features a hexagonal body for easy tightening with a wrench... -
470uF 25V SMD Electrolytic Capacitor
The 470uF 25V (SMD) Electrolytic Capacitor is designed for surface-mount appl...
The 470uF 25V (SMD) Electrolytic Capacitor is designed for surface-mount applications, providing reliable performance and high capacitance in a compact form factor. This capacitor is ideal for filtering applications in power supplies, audio equipment, and various electronic circuits. Specifications: Capacitance: 470uF Voltage: 25V Mounting... -
150K Ohm 1206 Package 1/4W SMD Resistor 5% Tolerance (Pack of 20 Pieces)
This is 150K Ohm SMD Resistor in a 1206 package is a standard thick film chip...
This is 150K Ohm SMD Resistor in a 1206 package is a standard thick film chip resistor designed for surface-mount applications. With a power rating of 1/4W and a tolerance of ±5%, This resistor offers a high voltage rating and durability, making it suitable... -
1.5K Ohm 1206 Package 1/4W SMD Resistor 5% Tolerance (Pack of 20 Pieces)
This is 1.5K Ohm SMD Resistor in a 1206 package is a standard thick film chip...
This is 1.5K Ohm SMD Resistor in a 1206 package is a standard thick film chip resistor designed for surface-mount applications. With a power rating of 1/4W and a tolerance of ±5%, This resistor offers a high voltage rating and durability, making it suitable... -
Non-Insulated Copper Tubular Lugs - 35 mm
These lugs are used for securely connecting or terminating power cables to el...
These lugs are used for securely connecting or terminating power cables to electrical apparatus, control panels, machinery or equipment. Features: Chemical resistant Non-corrosive High strength Package Includes: 1 Piece of Non-Insulated Copper Tubular Lugs -35 mm -
WANPTEK WPS3010H DC Adjustable Power Supply - 30V/10A
WANPTEK WPS3010H DC Adjustable Power Supply is a compact and portable switchi...
WANPTEK WPS3010H DC Adjustable Power Supply is a compact and portable switching power supply with maximum voltage and current of 30V and 10A. It comes equipped with USB fast charging and variable resistors for easy control and adjustments. Perfect for your power supply needs. ... -
5mm Rectangle 2-Pin Through-Hole Flat Top Diffused LED - Blue
The 5mm Rectangle Flat Top Diffused Blue LED is designed for clear, uniform l...
The 5mm Rectangle Flat Top Diffused Blue LED is designed for clear, uniform light output and excellent visibility in indicator and display applications. Its rectangular shape and flat-top diffused lens offer a wide viewing angle, making it ideal for panel indicators, DIY electronics, signaling... -
PG9 Cable Gland Connector (DIA-15mm)- Plastic Nylon Waterproof IP68 Wire Enclosures-Black
The PG Cable Gland Connector is a waterproof device that connects cables to e...
The PG Cable Gland Connector is a waterproof device that connects cables to enclosures. Made of durable plastic nylon material and rated IP68, it can withstand harsh environments. It consists of a threaded body, locking nut, sealing ring, and compression gland. The threaded body... -
TL074 Low Noise JFET Quad Op-Amp IC - DIP-14 Package
The TL074 is a low-noise, JFET-input quad operational amplifier IC designed f...
The TL074 is a low-noise, JFET-input quad operational amplifier IC designed for high-performance analog applications. Manufactured using advanced bipolar and JFET technologies, the IC delivers superior performance with minimal noise and low power consumption. With four independent op-amps integrated into a single package, the...
All Products
Close
Sidebar
Categories
- Development Boards
-
Sensor Modules
- Color Sensors
- Current Sensors
- Distance Sensors
- Fingerprint Sensors
- Flex Sensors
- Flow Sensors
- Gas Sensors
- Hall/Magnet Sensors
- Heartbeat Sensors
- Humidity Sensors
- Temperature/Humidity Sensors
- IR/Motion Sensors
- Light Sensors
- Motion/Tilt Sensors
- PH Sensors
- Pressure Sensors
- Accelerometer and Gyrometer Sensors
- Proximity Sensors
- Rain/Soil Moisture Sensors
- Soil Sensors
- Sound Sensor
- Touch Sensors
- Vibration Sensors
- Voltage Sensors
- Water Level/Flow Sensors
- Weighing Sensors
- RFID Tags and Modules
- Semiconductors & Prototyping Components
- Batteries, Power Supplies & Accessories
- Wireless & IoT Products
- Switches, Relays & Protection
- Lighting & LEDs
- Motors, Drivers & Pumps
- Wires, Cables & Connectors
- Robotics & DIY Learning Kits
- 3D Printers & Parts
- SMD Components
- Electronic Modules
- Drone Components
- Hardware Instruments & Tools
- Displays
- Shop By Brand
- Choosing a selection results in a full page refresh.