-
RFID Card / RFID Tag (125KHz RF Range)
The RFID Card / RFID Tag (125KHz) is a contactless passive transponder used i...
The RFID Card / RFID Tag (125KHz) is a contactless passive transponder used in access control, attendance systems, and identification applications. Operating at a low frequency of 125KHz, this tag offers reliable short-range communication and is compatible with a wide range of RFID readers. Its... -
470uF 25V Radial Electrolytic Capacitor – Through Hole
The 470uF 25V radial electrolytic capacitor is a high-capacitance through-hol...
The 470uF 25V radial electrolytic capacitor is a high-capacitance through-hole component suitable for energy storage, filtering, and decoupling in electronic circuits. Its radial lead design ensures easy PCB installation and reliable mechanical stability. Features: Low ESR for efficient filtering Long lifespan and dependable performance... -
PIC12F629 8-bit PIC Microcontroller
PIC12F629 is an eight-pin 8-bit PIC Microcontroller with an operating voltage...
PIC12F629 is an eight-pin 8-bit PIC Microcontroller with an operating voltage from 2V to 5.5V. It has 128 bytes of EEPROM with 4 internal oscillator configuration up to 4MHz (RC oscillator) with power-on-reset. It also has two timers (8bit and 16-bit) and one comparator.... -
2M ohm (205) 5% SMD Resistor 0805 ( Pack of 20 Pieces )
2M Ohm 1/8W 0805 package Surface Mount Chip Resistor is a small surface-mou...
2M Ohm 1/8W 0805 package Surface Mount Chip Resistor is a small surface-mount resistor. It is a thick film resistor with a ceramic body as a substrate. Specifications : Resistance 2M ohm (205) Resistor Chip size 0805 Tolerance 5% Power 1/8W Temperature Range -55°C to... -
S8550 2TY PNP Transistor – SOT23
The S8550 2TY is a versatile PNP bipolar junction transistor (BJT) designed f...
The S8550 2TY is a versatile PNP bipolar junction transistor (BJT) designed for a variety of electronic applications. Encased in a compact SOT23 package, this transistor offers excellent electrical characteristics, making it suitable for low to medium power switching and signal amplification tasks. Features Transistor... -
EE19 SMPS High Frequency 24W PCB Mount Transformer with Auxiliary Winding
The EE19 SMPS High Frequency 24W PCB Mount Transformer is engineered for comp...
The EE19 SMPS High Frequency 24W PCB Mount Transformer is engineered for compact and efficient power conversion in switch-mode power supplies. Built with a PC40 core and high-grade copper windings, it supports a wide frequency range and delivers consistent output with low thermal stress.... -
Ky020 Tilt Switch Sensor Module
Tilt sensors are used to measure the orientation from horizontal reference pl...
Tilt sensors are used to measure the orientation from horizontal reference plane of any object. People use bubble method to identify orientation, string method and accelerometer to do that but it is one of the most important aspect of any RC plane or quadcopter... -
Jiabaida (JBD) LiFePo4 15S 48V 40A Battery Management System - BMS Protection Board
Jiabaida (JBD) LiFePo4 15S 48V 40A BMS is a smart Battery Management System ...
Jiabaida (JBD) LiFePo4 15S 48V 40A BMS is a smart Battery Management System built on the ZP16S011 hardware, engineered for 15-cell LiFePo4 battery packs. It offers reliable protection against overcharge, over-discharge, overcurrent, and short circuits while providing passive balancing for maintaining cell voltage uniformity.... -
75Pcs Plastic Gear Assorted Kit Set with Various Gear and Axle Belt, Bushings and Pulleys for DIY Car Robot Project
The 75Pcs Plastic Gear Assorted Kit is a comprehensive collection of mechanic...
The 75Pcs Plastic Gear Assorted Kit is a comprehensive collection of mechanical components designed for DIY robotics, toy repairs, science experiments, and model-building projects. This multipurpose kit includes a wide variety of gears, axles, pulleys, and bushings suitable for hands-on learners, hobbyists, and inventors.... -
Taparia Two in One Screw Driver - 805
Made with durable steel, the Taparia Two in One Screw Driver offers a versati...
Made with durable steel, the Taparia Two in One Screw Driver offers a versatile tool for all your screw driving needs. Features: Blade Length: 100mm Tip Dimension: 5.0X0.8mm Shape: Flat Type of Product: Twin In One Screw Driver Blade Diameter: 5.0mm Model No: 805... -
61mm PVC Heat Shrink Sleeve for Lithium Battery Pack - 1 Meter (Cool Green)
This is a green color 61mm 1 meter PVC Heat Shrink Sleeve for Lithium batte...
This is a green color 61mm 1 meter PVC Heat Shrink Sleeve for Lithium battery Pack. It can be used to protect, insulate and hold your battery packs to provide stability, electrical insulation, mechanical protection, sealing, and strain relief. Features: Operating Temperature: -10C-+105C; Fit for: AA Battery... -
10 Ohm 1206 Package 1/4W SMD Resistor 5% Tolerance (Pack of 20 Pieces)
This is 10 Ohm SMD Resistor in a 1206 package is a standard thick film chip r...
This is 10 Ohm SMD Resistor in a 1206 package is a standard thick film chip resistor designed for surface-mount applications. With a power rating of 1/4W and a tolerance of ±5%, This resistor offers a high voltage rating and durability, making it suitable... -
2.2nF / 2200pF 50V 0805 SMD Capacitor (Pack of 20 Pieces)
This 2.2nF SMD capacitor uses surface mount technology and comes in a 0805 pa...
This 2.2nF SMD capacitor uses surface mount technology and comes in a 0805 package. These capacitors have a maximum voltage of 50 Volts, and their tolerance is ±10%. This capacitors offer stability and low losses for resonant circuit applications. Specifications : Capacitance 2.2nF Tolerance(%) 10 Voltage (V) 50 Dissipation... -
2835 12V Warm White LED Strip - 5 meter
In modern world as we are becoming more and more environment conscious we are...
In modern world as we are becoming more and more environment conscious we are moving towards more and more environment friendly solutions so instead of wasting energy on the halogen and incandescent bulbs we are shifting to LED which are much more energy efficient and provide... -
Aluminum Flexible Shaft Coupling - 5x5mm
The Aluminum Flexible Shaft Coupling 5mm x 5mm is a precision-machined mechan...
The Aluminum Flexible Shaft Coupling 5mm x 5mm is a precision-machined mechanical connector used to join two shafts of equal diameter—commonly used in CNC machines, 3D printers, and robotics applications. Made from high-quality aluminum alloy, it provides excellent torsional rigidity while compensating for minor... -
3.7V 30C 350mAh Lithium-Polymer Rechargeable Battery (YY702025) for Drones
The 3.7V 30C 350mAh Lithium-Polymer (LiPo) Battery (YY702025) is a lightweigh...
The 3.7V 30C 350mAh Lithium-Polymer (LiPo) Battery (YY702025) is a lightweight and compact rechargeable power source, ideal for portable electronics and devices requiring high discharge rates and efficient power delivery. Its advanced design ensures reliability and consistent performance, even in demanding environments. The battery’s... -
Non-Insulated Aluminum Ring Terminal / Lugs (10mm)
These lugs are used for securely connecting or terminating power cables to el...
These lugs are used for securely connecting or terminating power cables to electrical apparatus, control panels, machinery or equipment. Features: Chemical resistant Non-corrosive High strength Hole - 4mm Package Includes: 1 Piece of Non-Insulated Aluminum Ring Terminal / Lugs (10mm) -
0.5 sqmm Twin Insulated Terminal Ferrule End Lug (Pack of 5) Crimp Wire Lugs/End Sealing Lugs/Crimp Connectors/Tubular Lugs
The Twin Insulated Lugs are designed with a pre-insulating coating that allow...
The Twin Insulated Lugs are designed with a pre-insulating coating that allows you to easily plug and unplug the cables. How are they used? A wire or cable is stripped to the same length as the terminal and pushed into the correct size ferrule through the... -
TC Cable Nail Clip 10mm (pack of 10)
Secure your wires and cables with the TC Cable Nail Clip 10.0mm. This pack of...
Secure your wires and cables with the TC Cable Nail Clip 10.0mm. This pack of 10 clips keeps your wiring firmly in place with a strong and reliable design, perfect for both indoor and outdoor applications. The clips are made from galvanized steel for... -
68 ohm 5% SMD Resistor 0805 ( Pack of 20 Pieces )
68 Ohm 1/8W 0805 package Surface Mount Chip Resistor is a small surface-mou...
68 Ohm 1/8W 0805 package Surface Mount Chip Resistor is a small surface-mount resistor. It is a thick film resistor with a ceramic body as a substrate. Applications: Consumer Electronics Portable Devices Industrial Applications Power Management DIY mini PCB projects Specifications : Resistance 68 ohm ... -
Orange LED - SMD (0805 Package) - Pack of 50
The Orange LED in an SMD (Surface-Mount Device) 0805 package is a compact and...
The Orange LED in an SMD (Surface-Mount Device) 0805 package is a compact and efficient light-emitting diode, tailored for a variety of applications requiring bright and reliable red light. The 0805 package, measuring approximately 2.0mm x 1.25mm, offers a slightly larger footprint than the... -
Axial 10uH Inductor
An axial inductor is also referred to as a color ring inductor. It is a two-...
An axial inductor is also referred to as a color ring inductor. It is a two-terminal passive electronic component that is used for filtering, tuning, power electronics and spike suppression. Inductors are ideal to use in the previously listed applications because they have an innate ability to store... -
PL2303 TA Download Cable USB To TTL RS232 Module USB To Serial
This is the PL2303 TA Download Cable USB to TTL RS232 Module USB to Serial. T...
This is the PL2303 TA Download Cable USB to TTL RS232 Module USB to Serial. This cable is the easiest way to connect your microcontroller, Raspberry Pi, or WiFi router serial console port. Inside the USB plug is a USB to Serial conversion chip, and... -
T2A 2A 250V 392 Fuse Slow Blow Box-Type Miniature Square Fuse - DIP Package
The T2A 250V 2A Slow Blow Box-Type Miniature Fuse is a compact and reliable o...
The T2A 250V 2A Slow Blow Box-Type Miniature Fuse is a compact and reliable overcurrent protection device designed for electronic circuits and power supplies. With its time-delay (slow blow) characteristics, it allows short-term current surges while protecting against prolonged overloads and short circuits. The... -
IRF840 Power MOSFET - 8A - TO-220 Package
The IRF840 is an N-channel power MOSFET designed for high-voltage switching a...
The IRF840 is an N-channel power MOSFET designed for high-voltage switching applications. With a drain-source voltage rating of 500V and a continuous drain current of up to 8A, it is commonly used in power supplies, inverters, motor drivers, and general-purpose switching circuits. The TO-220... -
78M15/7815 - 15V Positive Voltage Regulator IC - TO-252 SMD Package
The 78M15/7815 is a 15V positive voltage regulator IC designed to provide a s...
The 78M15/7815 is a 15V positive voltage regulator IC designed to provide a stable output voltage with a high current capability. It is housed in a TO-252 surface-mount device (SMD) package, making it suitable for high-density circuit board layouts. Here’s a detailed description of... -
Non-Insulated Y-Spade Terminal / Lugs (10mm)
These lugs are used for securely connecting or terminating power cables to el...
These lugs are used for securely connecting or terminating power cables to electrical apparatus, control panels, machinery or equipment. Features: Chemical resistant Non-corrosive High strength Package Includes: 1 Piece of Non-Insulated Y-Spade Terminal / Lugs (10mm) -
CR2032 3.0V 19E Coin Cell Battery with 3 pin Connector
This is a CR2032 coin cell 220mAh lithium battery with leads and connector. I...
This is a CR2032 coin cell 220mAh lithium battery with leads and connector. It provides long-lasting, reliable power for various devices and test equipment. These 3V batteries have 220mAH of capacity with a standard discharge current of 0.2mA. This battery can be utilized upto 2.0V cutoff voltage. That means... -
Orange LED - SMD (0603 Package) - Pack of 50
The Orange LED in an SMD (Surface-Mount Device) 0603 package is a compact and...
The Orange LED in an SMD (Surface-Mount Device) 0603 package is a compact and versatile light-emitting diode, ideal for a wide range of applications. Known for its high brightness and reliability, this LED is designed to provide efficient and consistent illumination in a minimal... -
4.0 sqmm non-insulated pin Terminals CP-3 Lugs
The 4.0 sqmm non-insulated pin Terminals CP-3 Lugs are high-qualit...
The 4.0 sqmm non-insulated pin Terminals CP-3 Lugs are high-quality electrical connectors designed to securely connect wires and cables. These lugs are made from high-grade materials, making them durable and long-lasting. The CP-3 lugs are non-insulated, making them unsuitable for use in applications where... -
330k ohm (331) 5% SMD Resistor 0805 ( Pack of 20 Pieces )
330k Ohm 1/8W 0805 package Surface Mount Chip Resistor is a small surface-m...
330k Ohm 1/8W 0805 package Surface Mount Chip Resistor is a small surface-mount resistor. It is a thick film resistor with a ceramic body as a substrate. Applications: Consumer Electronics Portable Devices Industrial Applications Power Management DIY mini PCB projects Specifications : Resistance 330K ohm... -
YX850 5V–48V Power Failure Automatic Switching Standby Battery Module
The YX850 is a versatile power failure automatic switching module designed to...
The YX850 is a versatile power failure automatic switching module designed to seamlessly switch between main power and backup battery supply in the event of a power outage. Supporting a wide input range from 5V to 48V, this module ensures uninterrupted power delivery for critical...