ESP8266-01 WiFi Transceiver Module (ESP-01)

ESP8266-01 WiFi Transceiver Module (ESP-01) ESP8266-01 WiFi Transceiver Module (ESP-01)

SKU SKU QC0166

Availability Availability 172 In stock

The ESP8266-01 is a low cost and user-friendly device to provide internet connectivity to your projects. This module can be used as a Wi-Fi hotspot or can connect to any WI-Fi network. We use this module to make our projects IoT enabled and gather and process the data easily. The ESP-01 can also fetch data from the internet and it can be used in your project. Its most important feature is that it can be programmed with Arduino IDE, which makes it a lot more user friendly. One drawback of this module is that it only has two GPIO pins, so you have to use it along with another controller like Arduino, or go for other modules like NodeMCU, ESP-12, or ESP-32. It finds uses in Portable Electronics, Robotics, Home Automation, Wireless Data Logging, etc.

Specifications

802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
+19.5dBm output power in 802.11b mode
Dimensions: 25 x 15 x 11 mm (LxWxH)
Weight: 2 gm
1MB Flash Memory
SDIO 1.1 / 2.0, SPI, UART
Integrated TR switch, Balun, LNA, power amplifier and matching network
Integrated PLLs, regulators, DCXO and power management units
Wake up and transmit packets in < 2ms
Power down leakage current of <10uA
PCB Thickness: 1mm
Integrated low power 32-bit CPU could be used as an application processor
Standby power consumption of < 1.0mW (DTIM3)

Product Description

To use the module, power it with 3.3V supply, take caution as anything over 3.7V will damage the board. Connect the transmitter and receiver pins to respective pins on the Arduino board or you can use the FTDI board that supports 3.3V programming. You can use it as Access Point, Station, or on both Modes to connect to the Internet.

Additional Resources

Datasheet of ESP-01 Wifi Module

Getting Started with ESP01

Arduino Project With ESP-01

Specifications

802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
+19.5dBm output power in 802.11b mode
Dimensions: 25 x 15 x 11 mm (LxWxH)
Weight: 2 gm
1MB Flash Memory
SDIO 1.1 / 2.0, SPI, UART
Integrated TR switch, Balun, LNA, power amplifier and matching network
Integrated PLLs, regulators, DCXO and power management units
Wake up and transmit packets in < 2ms
Power down leakage current of <10uA
PCB Thickness: 1mm
Integrated low power 32-bit CPU could be used as an application processor
Standby power consumption of < 1.0mW (DTIM3)

Product Description

Additional Resources

Datasheet of ESP-01 Wifi Module

Getting Started with ESP01

Arduino Project With ESP-01

Returns Policy

Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.

1. Manufacturing Defect

If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

2. Wrong Item Shipped

If you receive a different product then the ordered one, please contact us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

Limitation of Returns

We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product.

Shipping

We ship to all over India with flat shipping rate of INR 45 for all the orders below INR 599. For all the orders above INR 599, we offer a free shipping. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.