2N2222 Transistor
2N2222 NPN Switching Transistor
Click to zoom in
  • Free Shipping

    On prepaid orders above INR 500

  • Cash On Delivery

    COD available for orders above INR 500

  • 3-5 Days Delivery

    Shipped within 24 hrs

  • Dedicated Support

    Mon to Sat - 10 AM to 6.30 PM

2N2222 NPN Switching Transistor

QC0237
574 In stock
Rs. 4.00 (Inc. GST)
Rs. 4.00

The 2N2222A is a common NPN Bipolar Junction Transistor (BJT) is used for general purpose low power amplifying or switching actions. As it is an NPN transistor, so collector and emitter will be left open when no signal is at the base and when a signal is provided to the base terminal, then the emitter and collector will be closed i.e. they will start conducting as BJT will operate in Saturation Region. 2N2222A has a gain value of 110 to 800, this value determines the amplification capacity of the transistor. The maximum amount of current that could flow through the Collector pin is 800mA, hence we cannot connect loads that consume more than 800mA using this transistor. To bias a transistor, we have to supply current to base pin, this current (IB) should be limited to 5mA. It can be used in switching applications with current up to 800mA, in speed control of motors, also it can be used in Darlington Pair.

 

Specifications

  • Bi-Polar high current NPN Transistor
  • DC Current Gain (hFE)is 100 to 300
  • Continuous Collector current (IC) is 800mA
  • Emitter Base Voltage (VBE) is 6V
  • Collector-Emitter Voltage (VCE) is 40V
  • Base Current (IB) is 5mA maximum
  • Available in To-92 Package
  • Rise Time 25nSec, Fall Time 60nSec

 

Product Description

The 2N2222A is very much similar to BC547 BJT and 2N3902 BJT except it can allow more current than BC547 and can dissipate 652mW of power. To use it as a Switch or amplifier, you just have to forward bias Base Emitter Junction but care should be taken to limit the base current as emitter can only allow up to 800mA of the current to power the device.

 

Additional Resources

Datasheet of 2N2222A NPN BJT

Arduino Based Project using 2N2222A BJT

Raspberry Pi based project 2N2222A NPN BJT

 

Package Contents

1×2N2222A NPN Switching Transistor

    Read More
    Read Less

    Returns Policy

    Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.

    1. Damaged During Shipment
    If you receive a product damaged during shipment, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

    2. Wrong Item Shipped

    If your item looks different from what is shown in the image on our website, we will take the item back and provide a refund or replacement as per your choice.

    Limitation of Returns
    We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product. Returns are accepted only with 3 days from the date of delivery.

    Shipping

    We ship to all over India with free shipping on all prepaid orders above 500. For Cash on Delivery orders INR 80 will be charged for orders below INR 599 and INR 30 will be charged for the orders above 599. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.


    Please note that the Minimum Order Value is INR 500 for COD orders.

    Your cart

    ×