-
68 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 68 ohm carbon film resistors with 1/4 Watt and 5% tolera...
This is a set of 10, 68 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
Ky031 Knock Tap Sensor Module
Knock or crash detect sensors are very popular in the applications where you ...
Knock or crash detect sensors are very popular in the applications where you want to ensure the safety of the equipment or the person operating that equipment in event of a crash or excessive vibration which can cause damage to any of them. The... -
150pF Ceramic Capacitor (Pack of 5)
Ceramic Capacitors are low cost and high speed switching capacitors. They are...
Ceramic Capacitors are low cost and high speed switching capacitors. They are normally used for noise filtering, tuning, coupling and other applications. They can also be found it RC, LC and RLC filters. Ceramic capacitor can switch faster than electrolytic capacitors, but they are... -
390K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 390K ohm carbon film resistors with 1/4 Watt and 5% tole...
This is a set of 10, 390K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
1.8K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 1.8K ohm carbon film resistors with 1/4 Watt and 5% tole...
This is a set of 10, 1.8K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
Axial 1uH Inductor
An axial inductor is also referred to as a color ring inductor. It is a two-...
An axial inductor is also referred to as a color ring inductor. It is a two-terminal passive electronic component that is used for filtering, tuning, power electronics and spike suppression. Inductors are ideal to use in the previously listed applications because they have an... -
820K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 820K ohm carbon film resistors with 1/4 Watt and 5% tole...
This is a set of 10, 820K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
240 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 240 ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 240 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
82 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 82 ohm carbon film resistors with 1/4 Watt and 5% tolera...
This is a set of 10, 82 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
0 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 0 ohm carbon film resistors with 1/4 Watt and 5% tolera...
This is a set of 10, 0 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire.... -
7.5K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 7.5K ohm carbon film resistors with 1/4 Watt and 5% tole...
This is a set of 10, 7.5K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
2SA1266 - PNP General Purpose Transistor
2SA1266 is a PNP transistor with a high current gain of upto 400. It is commo...
2SA1266 is a PNP transistor with a high current gain of upto 400. It is commonly used in Amplifier designs and also in general purpose switching circuits. The specification of the 2SA1266 transistor is give below: Collector-Emitter Voltage: 50 V Collector-Base Voltage: 50 V Emitter-Base Voltage: 5 V Collector Current: -0.15 A... -
22K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 22k ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 22k ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
300K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 300K ohm carbon film resistors with 1/4 Watt and 5% tole...
This is a set of 10, 300K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
750 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 750 ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 750 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
CD4020 14-bit Binary Counter IC - 16 Pin DIP Package
CD4020 is ripple-carry binary counters that features 14 Stages, push-pull typ...
CD4020 is ripple-carry binary counters that features 14 Stages, push-pull type, balanced outputs, with standard speed (tpd > 50ns). All counter stages are master-slave flip-flops. Supports wide input voltage ranges from 3V to 18V. The maximum input current at 18V is 1uA whereas 100nA at... -
51K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 51K ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 51K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
Axial 820uH Inductor
Inductors are an integral part of any electronic circuit as they help us to p...
Inductors are an integral part of any electronic circuit as they help us to protect the circuit from the current surges that might happen of you start any high-power device and other RF interference in the circuit. But the inductors that come in different... -
74HC244 Octal Buffer Line Driver IC - DIP-20 Package
The 74HC244 is an 8-bit buffer/line driver with 3-state outputs. The device c...
The 74HC244 is an 8-bit buffer/line driver with 3-state outputs. The device can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on OE causes... -
Axial 560uH Inductor
Inductors are an integral part of any electronic circuit as they help us to p...
Inductors are an integral part of any electronic circuit as they help us to protect the circuit from the current surges that might happen of you start any high-power device and other RF interference in the circuit. But the inductors that come in different size and shapes like toroidal... -
34K Ohm Rotary Potentiometer with Plastic Shaft (16MM)
This is a 34KΩ Linear single turn rotary potentiometer with a plastic shaft. ...
This is a 34KΩ Linear single turn rotary potentiometer with a plastic shaft. This pot is suitable for panel mounting and gives variable resistance values for its different shaft position from 0-34K ohm value. Package Includes: 1 x 34K Ohm Rotary Potentiometer with Plastic Shaft... -
Axial 22uH Inductor
An axial inductor is also referred to as a color ring inductor. It is a two-...
An axial inductor is also referred to as a color ring inductor. It is a two-terminal passive electronic component that is used for filtering, tuning, power electronics and spike suppression. Inductors are ideal to use in the previously listed applications because they have an innate ability to store... -
Axial 33uH Inductor
An axial inductor is also referred to as a color ring inductor. It is a two-...
An axial inductor is also referred to as a color ring inductor. It is a two-terminal passive electronic component that is used for filtering, tuning, power electronics and spike suppression. Inductors are ideal to use in the previously listed applications because they have an innate ability to store... -
82pF Ceramic Capacitor (Pack of 5)
Ceramic Capacitors are low cost and high speed switching capacitors. They are...
Ceramic Capacitors are low cost and high speed switching capacitors. They are normally used for noise filtering, tuning, coupling and other applications. They can also be found it RC, LC and RLC filters. Ceramic capacitor can switch faster than electrolytic capacitors, but they are... -
75pF Ceramic Capacitor (Pack of 5)
Ceramic Capacitors are low cost and high speed switching capacitors. They are...
Ceramic Capacitors are low cost and high speed switching capacitors. They are normally used for noise filtering, tuning, coupling and other applications. They can also be found it RC, LC and RLC filters. Ceramic capacitor can switch faster than electrolytic capacitors, but they are... -
74LS06 - Hex Inverter/Buffer IC
The 74LS06 is a Hex Inverter (NOT gate) IC. That is, the IC contains six NOT ...
The 74LS06 is a Hex Inverter (NOT gate) IC. That is, the IC contains six NOT gates, each with one input and one output pin. Each of the six NOT gates is powered by a common rail but can operate independently to perform logic... -
AN7112 Audio Power Amplifier IC
The AN7112 is a monolithic integrated circuit designed for 0.5W audio power ...
The AN7112 is a monolithic integrated circuit designed for 0.5W audio power amplifier. Features: Wide operating supply voltage range: Vcc= 4V...14V Low quescent current ICQ = 15mA (at Vcc=6V, RL=8Ohm) Package Includes: 1 x AN7112e Audio Power Amplifier IC -
SOP16 DIP Adapter Converter PCB Board 0.65/1.27mm
When we develop a system, we go from concept to design to prototype to testin...
When we develop a system, we go from concept to design to prototype to testing and then final product and in all of these prototyping and testing is the most important step as it irons out any flaws in your concept and remove the... -
230mm PVC Heat Shrink Sleeve for Lithium Battery Pack - 1 Meter (Blue)
This is a blue color 230mm 1 meter PVC Heat Shrink Sleeve for Lithium batt...
This is a blue color 230mm 1 meter PVC Heat Shrink Sleeve for Lithium battery Pack. It can be used to protect, insulate and hold your battery packs to provide stability, electrical insulation, mechanical protection, sealing, and strain relief. Features: Operating Temperature: -10C-+105C; Fit for: AA Battery... -
M4-12mm Bolt with Phillips Head (Mounting Screw) - Pack of 4
M4 screws are typically used in the manufacture of small items of electrical ...
M4 screws are typically used in the manufacture of small items of electrical equipment, laptops, cameras and mobile phones. The “M” designation for metric screws indicates the outer diameter of the screw in millimeters, so for an M4 screw, the outer diameter is 4mm. However,... -
M4-15mm Bolt with Star Head (Mounting Screw for PCB) - Pack of 4
M4 screws are typically used in the manufacture of small items of electrical ...
M4 screws are typically used in the manufacture of small items of electrical equipment, laptops, cameras and mobile phones. The “M” designation for metric screws indicates the outer diameter of the screw in millimeters, so for an M4 screw, the outer diameter is 4mm. However,... -
M4-20mm Bolt with Phillips Head (Mounting Screw) - Pack of 4
M4 screws are typically used in the manufacture of small items of electrical ...
M4 screws are typically used in the manufacture of small items of electrical equipment, laptops, cameras and mobile phones. The “M” designation for metric screws indicates the outer diameter of the screw in millimeters, so for an M4 screw, the outer diameter is 4mm. However,...
Featured Products
Close
Sidebar
Categories
- Development Boards
-
Sensor Modules
- Color Sensors
- Current Sensors
- Distance Sensors
- Fingerprint Sensors
- Flex Sensors
- Flow Sensors
- Gas Sensors
- Hall/Magnet Sensors
- Heartbeat Sensors
- Humidity Sensors
- Temperature/Humidity Sensors
- IR/Motion Sensors
- Light Sensors
- Motion/Tilt Sensors
- PH Sensors
- Pressure Sensors
- Accelerometer and Gyrometer Sensors
- Proximity Sensors
- Rain/Soil Moisture Sensors
- Soil Sensors
- Sound Sensor
- Touch Sensors
- Vibration Sensors
- Voltage Sensors
- Water Level/Flow Sensors
- Weighing Sensors
- RFID Tags and Modules
- Semiconductors & Prototyping Components
- Batteries, Power Supplies & Accessories
- Wireless & IoT Products
- Switches, Relays & Protection
- Lighting & LEDs
- Motors, Drivers & Pumps
- Wires, Cables & Connectors
- Robotics & DIY Learning Kits
- 3D Printers & Parts
- SMD Components
- Electronic Modules
- Drone Components
- Hardware Instruments & Tools
- Displays
- Shop By Brand
- Choosing a selection results in a full page refresh.