-
1N4744A 15V Zener Diode
This 1N4744A Zener diode is another form of diode which comes in Through-hole...
This 1N4744A Zener diode is another form of diode which comes in Through-hole package. Zener diode will mostly be used in a protection circuit or in a crude voltage regulator circuit. Either way, it very important to remember that a Zener diode should always be used along with... -
1.2K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 1.2K ohm carbon film resistors with 1/4 Watt and 5% tole...
This is a set of 10, 1.2K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
8.2K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 8.2K ohm carbon film resistors with 1/4 Watt and 5% tole...
This is a set of 10, 8.2K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
120K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 120K ohm carbon film resistors with 1/4 Watt and 5% tole...
This is a set of 10, 120K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
10M ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 10M ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 10M ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
220pF Ceramic Capacitor (Pack of 5)
Ceramic Capacitors are low cost and high speed switching capacitors. They are...
Ceramic Capacitors are low cost and high speed switching capacitors. They are normally used for noise filtering, tuning, coupling and other applications. They can also be found it RC, LC and RLC filters. Ceramic capacitor can switch faster than electrolytic capacitors, but they are... -
51K ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 51K ohm carbon film resistors with 1/4 Watt and 1% toler...
This is a set of 10, 51K ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
56K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 56K ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 56K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
5.6 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 5.6 ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 5.6 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
4.7 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 4.7 ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 4.7 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
82K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 82K ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 82K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
12K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 12K ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 12K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
120 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 120 ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 120 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
0 Ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 0 ohm carbon film resistors with 1/4 Watt and 5% toleran...
This is a set of 10, 0 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
270K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 270K ohm carbon film resistors with 1/4 Watt and 5% tole...
This is a set of 10, 270K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
5.6K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 5.6K ohm carbon film resistors with 1/4 Watt and 5% tole...
This is a set of 10, 5.6K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
S9012 PNP Transistor
Transistors are semiconductor devices which is used to amplify small signals ...
Transistors are semiconductor devices which is used to amplify small signals coming from a sensor or a circuit and other systems to be recorded and registered by the controller you are using or any data logger to register your signals which generally are too... -
560K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 560K ohm carbon film resistors with 1/4 Watt and 5% tole...
This is a set of 10, 560K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
1500pF Ceramic Capacitor (Pack of 5)
Ceramic Capacitors are low cost and high speed switching capacitors. They are...
Ceramic Capacitors are low cost and high speed switching capacitors. They are normally used for noise filtering, tuning, coupling and other applications. They can also be found it RC, LC and RLC filters. Ceramic capacitor can switch faster than electrolytic capacitors, but they are... -
FR107 Fast Recovery Rectifier Diode
FR107 is a fast recovery rectifier diode in a DO-41, molded plastic case. Fea...
FR107 is a fast recovery rectifier diode in a DO-41, molded plastic case. Features: Plastic Package: UL Flammability Classification Rating 94V-0 Capable of Meeting the Environmental Tests in MIL-STD-750C High Reliability and Low Leakage Fast Switching for High Efficiency Package Includes: 1 x FR107 Rectifier... -
24 Pin DIP IC Socket/Base
DIP package ICs are one of the most common packages type we use in our projec...
DIP package ICs are one of the most common packages type we use in our projects or industrial applications too. But when you are using Perfboard or designing your own PCB or even when you want your product to be easily serviceable if your... -
68K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 68K ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 68K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
2.7K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 2.7K ohm carbon film resistors with 1/4 Watt and 5% tole...
This is a set of 10, 2.7K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
390 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 390 ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 390 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
300 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 300 ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 300 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
180 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 180 ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 180 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
CD4011 - Quad 2-Input NAND Gate IC
The CD4011 is a quad package 2-Input NAND gate IC. That is, it has four NAND ...
The CD4011 is a quad package 2-Input NAND gate IC. That is, it has four NAND gates inside a single package and each gate has two input lines and one output line. All the inputs and outputs are buffered and this improves transfer characteristics... -
39 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 39 ohm carbon film resistors with 1/4 Watt and 5% tolera...
This is a set of 10, 39 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
6800pF Ceramic Capacitor (Pack of 5)
Ceramic Capacitors are low cost and high speed switching capacitors. They are...
Ceramic Capacitors are low cost and high speed switching capacitors. They are normally used for noise filtering, tuning, coupling and other applications. They can also be found it RC, LC and RLC filters. Ceramic capacitor can switch faster than electrolytic capacitors, but they are... -
680pF Ceramic Capacitor (Pack of 5)
Ceramic Capacitors are low cost and high speed switching capacitors. They are...
Ceramic Capacitors are low cost and high speed switching capacitors. They are normally used for noise filtering, tuning, coupling and other applications. They can also be found it RC, LC and RLC filters. Ceramic capacitor can switch faster than electrolytic capacitors, but they are... -
68pF Ceramic Capacitor (Pack of 5)
Ceramic Capacitors are low cost and high speed switching capacitors. They are...
Ceramic Capacitors are low cost and high speed switching capacitors. They are normally used for noise filtering, tuning, coupling and other applications. They can also be found it RC, LC and RLC filters. Ceramic capacitor can switch faster than electrolytic capacitors, but they are... -
820 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 820 ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 820 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This...