-
LDR Sensor (Light Dependent Resistor) - 5mm
This is a LDR sensor with Two Cadmium Sulphide (cds) Photoconductive Cells an...
This is a LDR sensor with Two Cadmium Sulphide (cds) Photoconductive Cells and spectral responses similar to that of the human eye. The Cell resistance falls with increasing light intensity. This photoresistor has application such as smoke detection, Automatic lighting control, batch counting and burglar alarm systems.... -
1K ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 1K ohm carbon film resistors with 1/4 Watt and 1% tolera...
This is a set of 10, 1K ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
Resistor Combo Kit (30 values, 5 each - 150 resistors)
Quarter Watt (1/4W) resistors are the most used type of resistors that are us...
Quarter Watt (1/4W) resistors are the most used type of resistors that are used in simple electronic projects and DIY hobbyist projects. They come with long pliable leads which you can use to either plug in the breadboard holes or can be easily soldered... -
1K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 1k ohm carbon film resistors with 1/4 Watt and 5% tolera...
This is a set of 10, 1k ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and... -
10K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 10K ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 10K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
10K Ohm Preset Potentiometer (POT)
A potentiometer is a variable resistor with three terminals, where Two termin...
A potentiometer is a variable resistor with three terminals, where Two terminals are connected to a resistive element and the third terminal is connected to an adjustable round wiper. The position of the wiper determines the output voltage. This 10K ohm compact linear Potentiometer with plastic dust-cap is suitable for... -
220 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 220 ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 220 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
10K ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 10K ohm carbon film resistors with 1/4 Watt and 1% toler...
This is a set of 10, 10K ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
220 ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 220 ohm carbon film resistors with 1/4 Watt and 1% toler...
This is a set of 10, 220 ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
10K Ohm Potentiometer - Large 3 Pin 15mm Potentiometer
Potentiometers are very useful in changing the electrical parameters of a sys...
Potentiometers are very useful in changing the electrical parameters of a system. It is a resistive type potentiometer which you can use to change RC constant of a circuit, changing the voltage level at comparator, changing the audio output volume, changing the brightness of... -
10K ohm 2 Watt Resistor (Pack of 4)
This is a packet of four Carbon Film Resistors (CFR). The resistance of each ...
This is a packet of four Carbon Film Resistors (CFR). The resistance of each is 10K Ohm and the rated power is 2W. The main function of carbon film resistors is to reduce the current flow in a circuit. It can be used for current limiting, voltage division,... -
1k ohm 2 Watt Resistor (Pack of 4)
This is a packet of four Carbon Film Resistors (CFR). The resistance of each ...
This is a packet of four Carbon Film Resistors (CFR). The resistance of each is 1K Ohm and the rated power is 2W. The main function of carbon film resistors is to reduce the current flow in a circuit. It can be used for current limiting, voltage division,... -
100K ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 100K ohm carbon film resistors with 1/4 Watt and 1% tole...
This is a set of 10, 100K ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
100 Ohm 2 Watt Resistor (Pack of 4)
This is a packet of four Carbon Film Resistors (CFR). The resistance of each ...
This is a packet of four Carbon Film Resistors (CFR). The resistance of each is 100 Ohm and the rated power is 2W. The main function of carbon film resistors is to reduce the current flow in a circuit. It can be used for current limiting, voltage division,... -
100 ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 100 ohm carbon film resistors with 1/4 Watt and 1% toler...
This is a set of 10, 100 ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
100K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 100K ohm carbon film resistors with 1/4 Watt and 5% tole...
This is a set of 10, 100K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
100K Potentiometer
Potentiometers are very useful in changing the electrical parameters of a sys...
Potentiometers are very useful in changing the electrical parameters of a system. It is a single turn 100k Potentiometer with a rotating knob. These potentiometers are also commonly called as a rotary potentiometer or just POT in short. These three-terminal devices can be used to vary... -
10 Ohm 2 Watt Resistor (Pack of 4)
This is a packet of four Carbon Film Resistors (CFR). The resistance of each ...
This is a packet of four Carbon Film Resistors (CFR). The resistance of each is 10 Ohm and the rated power is 2W. The main function of carbon film resistors is to reduce the current flow in a circuit. It can be used for current limiting, voltage division,... -
1 Ohm, 2 Watt Resistor (Pack of 4)
This is a packet of four Carbon Film Resistors (CFR). The resistance of each ...
This is a packet of four Carbon Film Resistors (CFR). The resistance of each is 1 Ohm and the rated power is 2W. The main function of carbon film resistors is to reduce the current flow in a circuit. It can be used for... -
NTC Thermistor 10K Ohm
Thermistor is a type of variable resistor whose resistance varies based on th...
Thermistor is a type of variable resistor whose resistance varies based on the change in temperature around it. This 10K Ohm NTC Thermistor is commonly used as a temperature sensor in heating sensing applications. It has a temperature coefficient of -25°C to 90°C. ... -
330 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 330 ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 330 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
100 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 100 ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 100 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
1K Ohm Preset Potentiometer (POT)
A potentiometer is a variable resistor with three terminals, where Two termin...
A potentiometer is a variable resistor with three terminals, where Two terminals are connected to a resistive element and the third terminal is connected to an adjustable round wiper. The position of the wiper determines the output voltage. This 1K ohm compact linear Potentiometer... -
330 ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 330 ohm carbon film resistors with 1/4 Watt and 1% toler...
This is a set of 10, 330 ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
1M ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 1M ohm carbon film resistors with 1/4 Watt and 5% tolera...
This is a set of 10, 1M ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
1M ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 1M ohm carbon film resistors with 1/4 Watt and 1% tolera...
This is a set of 10, 1M ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
470 ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 470 ohm carbon film resistors with 1/4 Watt and 1% toler...
This is a set of 10, 470 ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
33K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 33K ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 33K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
2.2K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 2.2K ohm carbon film resistors with 1/4 Watt and 5% tole...
This is a set of 10, 2.2K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
10 ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 10 ohm carbon film resistors with 1/4 Watt and 1% tolera...
This is a set of 10, 10 ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
100K Ohm Trimpot Potentiometer (Variable Resistor)
Potentiometer are very important part of electronic circuits as they are use...
Potentiometer are very important part of electronic circuits as they are used across wide range of applications ranging from comparator circuits, voltage control, LED intensity to even volume and fan speed control in our homes. A potentiometer is a variable resistor with three terminals, where Two terminals are connected... -
47K Ohm Dual Gang Rotary Potentiometer - Large 6 Pin Potentiometer
It is a 47kΩ, 6 Pin, Dual Gang Rotary Carbon Potentiometer with a Shaft lengt...
It is a 47kΩ, 6 Pin, Dual Gang Rotary Carbon Potentiometer with a Shaft length of 9mm. This is used for adjusting various parameters like voltage, current, etc in an electronic circuit. Potentiometers are very useful in changing the electrical parameters of a system....
All Products
Close
Sidebar
Categories
- Development Boards
-
Sensor Modules
- Color Sensors
- Current Sensors
- Distance Sensors
- Fingerprint Sensors
- Flex Sensors
- Flow Sensors
- Gas Sensors
- Hall/Magnet Sensors
- Heartbeat Sensors
- Humidity Sensors
- Temperature/Humidity Sensors
- IR/Motion Sensors
- Light Sensors
- Motion/Tilt Sensors
- PH Sensors
- Pressure Sensors
- Accelerometer and Gyrometer Sensors
- Proximity Sensors
- Rain/Soil Moisture Sensors
- Soil Sensors
- Sound Sensor
- Touch Sensors
- Vibration Sensors
- Voltage Sensors
- Water Level/Flow Sensors
- Weighing Sensors
- RFID Tags and Modules
- Semiconductors & Prototyping Components
- Batteries, Power Supplies & Accessories
- Wireless & IoT Products
- Switches, Relays & Protection
- Lighting & LEDs
- Motors, Drivers & Pumps
- Wires, Cables & Connectors
- Robotics & DIY Learning Kits
- 3D Printers & Parts
- SMD Components
- Electronic Modules
- Drone Components
- Hardware Instruments & Tools
- Displays
- Shop By Brand
- Choosing a selection results in a full page refresh.