Sale
STM32F103C8T6 Development Board
STM32F103C8T6 Board
STM32F103C8T6 Development Board
STM32F103C8T6 Board
Click to zoom in
  • 3-5 Days Delivery

    Fast Delivery

  • Dedicated Support

    Mon to Sat - 10 AM to 6.30 PM

  • Free Shipping

    On orders above INR 599

  • Cash On Delivery

    COD available on all orders

STM32F103C8T6 Development Board STM32 ARM Core Module

QC0399
206 In stock
Rs. 412.00 Rs. 305.00 (Exc. GST)
Rs. 305.00

The STM32F103C8T6 Development Board is a popular choice to learn how to program the STM32 Microcontrollers from ST Microelectronics. The board consists of the STM32F103C8T6 microcontroller which is a ARM Cortex-M 32-bit processor. It is a 40 pin microcontroller which holds two crystal oscillators of 8MHz and 32KHz crystal.  The MCU has inbuilt 5V to 3.3V voltage regulator to power the MCU. Unlike Arduino boards, the STM32 Development board works on 3.3V.

The MCU contains two onboard LEDs, one is used for power indication and the second LED is connected to the GPIO pin PC13. The STM32F103C8T6 MCU contains three boot modes which can be set using the Boot0 and Boot1 jumper pins.

STM32F103C8T6 Development Board Pinout

Specifications of STM32F103C8T6:

  • Operating voltage: 2.7V to 3.6V
  • CPU Frequency: 72 MHz
  • Number of GPIO pins: 37
  • Number of PWM pins: 12
  • Analog Input Pins: 10 (12-bit)
  • USART Peripherals: 3
  • I2C Peripherals: 2
  • SPI Peripherals: 2
  • Can 2.0 Peripheral: 1
  • Timers: 3(16-bit), 1 (PWM)
  • Flash Memory: 64KB
  • RAM: 20K

The development board can be easily programmed using the Arduino IDE. But if you want to explore the complete STM32 development boards, you can also use the STM32Cube and other development environments offered by ST Microelectronics. You can also use Keil, IAR workbench, Atollic TrueStudio, MicroC Pro ARM, Crossworks ARM, Ride 7, PlatformIO+STM32 etc. to program the board. The hex file of a program can be uploaded using a single wire interface module (SWIM) or by using JTAG/ serial wire debugging (SWD).

Boot1

Boot0

Boot mode

Aliasing

X

0

Main Flash memory

Main Flash memory is selected as boot space

0

1

System memory

System memory is selected as boot space

1

1

Embedded SRAM

Embedded SRAM is selected as boot space

 

If you want to program your STM32 MCU using a USB cable(without FTDI board) on an Arduino IDE, you need to get an Arduino compatible bootloader for the STM32 and then you can flash it into the STM32 board. Once the STM32 is flashed with the Arduino compatible bootloader, you can directly program the STM32 using Arduino IDE without the FTDI board and you don’t have to press the reset button when you upload a code.

Additional Resources:

Read More
Read Less

Returns Policy

Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.

1. Manufacturing Defect
If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost. Please note that if your item is already soldered or modified in manner we will not be able to take it under return.

2. Wrong Item Shipped

If your item looks different from what is shown in the image on our website, we will take the item back and provide a refund or replacement as per your choice.

Limitation of Returns
We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product. Returns are accepted only with 3 days from the date of delivery.

Shipping

We ship to all over India with free shipping on all prepaid orders. For Cash on Delivery orders INR 70 will be charged for orders below INR 599 and INR 20 will be charged for the orders above 599. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.


Please note that the Minimum Order Value is INR 200 for both prepaid and COD orders.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Avijit Mondal
STM32F103C8T6 BluePill

Nice Alternative of AVR Arduino , easy to programme, easy to use

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Avijit Mondal
STM32F103C8T6 BluePill

Nice Alternative of AVR Arduino , easy to programme, easy to use

Your cart

×