Sale
4 Cell 18650 Lithium Battery Holder
4 Cell 18650 Lithium Battery Holder
Click to zoom in
  • Free Shipping

    On prepaid orders above INR 500

  • Cash On Delivery

    COD available for orders above INR 500

  • 3-5 Days Delivery

    Shipped within 24 hrs

  • Dedicated Support

    Mon to Sat - 10 AM to 6.30 PM

4 Cell 18650 Lithium Battery Holder

QC0908
160 In stock
Rs. 46.00 Rs. 36.00 (Exc. GST)
Rs. 36.00

This 18650 Lithium Battery Holder is a high-quality Lithium battery holder that can hold four 18650 Lithium batteries. It's a space-saving battery holder with built-in PCB protective circuits for securing rechargeable 18650 Lithium-Ion Cells with increased energy density and reduced weight.

This Lithium Battery Holder is designed for 3.7 volt, high-energy, low-weight mobile electronics, industrial, and telecommunications applications that require circuit protection to prevent battery damage.


Pin Description of the 4 Cell 18650 Lithium Battery Holder

4 Cell 18650 Lithium Battery Holder

 

18650 Lithium Battery Holder Composition ( 4 Cell) : Contacts are 0.012" (0.30mm) thick Spring Steel with Tin Nickel plating or Phosphor Bronze with gold flash plating.


APPLICATIONS:

  • Computer memory, power backup systems
  • Digital readers
  • Laptop and touch pad computers
  • PLC and industrial controls

 

Key Features of the 4 Cell 18650 Lithium Battery Holder

  • Operating Temp Range: -60ºF to +290ºF (-50ºC to +145ºC)
  • Accommodates cells with or without built-in PCB protection circuits
  • Battery installation and removal does not require tools
  • Securely holds battery in place
  • Heat resistant nylon housing well suited for reflow soldering

Lithium-Battery-Holder-Dimensions-and-footprint

 

Additional Resources:

(https://www.keystone-europe.com/wp-content/uploads/2019/11/battery-clips-contacts-holders.pdf)

Package includes: 1 x DC 4 slot 18650 lithium battery holder

Read More
Read Less

Returns Policy

Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.

1. Damaged During Shipment
If you receive a product damaged during shipment, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

2. Wrong Item Shipped

If your item looks different from what is shown in the image on our website, we will take the item back and provide a refund or replacement as per your choice.

Limitation of Returns
We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product. Returns are accepted only with 3 days from the date of delivery.

Shipping

We ship to all over India with free shipping on all prepaid orders above 500. For Cash on Delivery orders INR 80 will be charged for orders below INR 599 and INR 30 will be charged for the orders above 599. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.


Please note that the Minimum Order Value is INR 500 for COD orders.

Customer Reviews

Based on 21 reviews
71%
(15)
10%
(2)
10%
(2)
5%
(1)
5%
(1)
S
Sailesh Deepak
Doesnt deliver the output voltage

Battery holder is sturdy but it doesnt deliver the output as required.Terminal wires are defective

H
H.R.
Working fine

It is in series config so for making power bank i had to make it all parallel.

Working fine.
Doesn't heatup for my setup.
I used four 18650 cells connected parallel to a 1s BMS (enough for protection i guess). Then from bms connected to Tp4056 module output/input pins.Then Soldered Usb a for output. Perfectly charging and discharging (Tried only once). For few hrs of usage not much heat observed in my condition. Product was nice.

Although that Four cell holder was in series i just soldered it into parallel (Soldering was headache) but after that everything was ON.

Only one issue observed: when i try to take output my phone automatically changes to normal slow charging mode (6 to 10hrs for full charge showing).Also sometimes output also iam not getting just blinking four led/1 led for 5 times then off donno why.Anyways it could be my old battery from laptop issue (its been there for 1 year at 3.7 V to 3.8V)

BMS - Not much heating observed
TP4056 - 5V 2A Usb c module , not much heating and stuff
4 cell holder Case - since it was series i had to resolder all

R
Rahul Sharma
It's good but plastic is so cheep

Plastic start melting when i use something heavy like 📯 horn or 12 volt dc motor

A
Aloke Kanjilal
I want my parcel product

Where is my product

H
Hemani Shatrughna Vijaykumar

Good Quality

Customer Reviews

Based on 21 reviews
71%
(15)
10%
(2)
10%
(2)
5%
(1)
5%
(1)
S
Sailesh Deepak
Doesnt deliver the output voltage

Battery holder is sturdy but it doesnt deliver the output as required.Terminal wires are defective

H
H.R.
Working fine

It is in series config so for making power bank i had to make it all parallel.

Working fine.
Doesn't heatup for my setup.
I used four 18650 cells connected parallel to a 1s BMS (enough for protection i guess). Then from bms connected to Tp4056 module output/input pins.Then Soldered Usb a for output. Perfectly charging and discharging (Tried only once). For few hrs of usage not much heat observed in my condition. Product was nice.

Although that Four cell holder was in series i just soldered it into parallel (Soldering was headache) but after that everything was ON.

Only one issue observed: when i try to take output my phone automatically changes to normal slow charging mode (6 to 10hrs for full charge showing).Also sometimes output also iam not getting just blinking four led/1 led for 5 times then off donno why.Anyways it could be my old battery from laptop issue (its been there for 1 year at 3.7 V to 3.8V)

BMS - Not much heating observed
TP4056 - 5V 2A Usb c module , not much heating and stuff
4 cell holder Case - since it was series i had to resolder all

R
Rahul Sharma
It's good but plastic is so cheep

Plastic start melting when i use something heavy like 📯 horn or 12 volt dc motor

A
Aloke Kanjilal
I want my parcel product

Where is my product

H
Hemani Shatrughna Vijaykumar

Good Quality

Your cart

×