-
5mm LED - Red Color
A standard 5mm Red color LED that can be used for indication or visualization...
A standard 5mm Red color LED that can be used for indication or visualization purposes. It can be used on breadboard, dot board and PCB. You can also use LED mount to fix them onto casings or enclosures. The longer lead is the positive... -
LDR Sensor (Light Dependent Resistor) - 5mm
This is a LDR sensor with Two Cadmium Sulphide (cds) Photoconductive Cells an...
This is a LDR sensor with Two Cadmium Sulphide (cds) Photoconductive Cells and spectral responses similar to that of the human eye. The Cell resistance falls with increasing light intensity. This photoresistor has application such as smoke detection, Automatic lighting control, batch counting and burglar alarm systems.... -
5mm LED - Green Color
A standard 5mm Green color LED that can be used for indication or visualizati...
A standard 5mm Green color LED that can be used for indication or visualization purposes. It can be used on breadboard, dot board and PCB. You can also use LED mount to fix them onto casings or enclosures. The longer lead is the positive and... -
1 Watt White Power LED
LEDs are very useful in projects when you want to display some info to the us...
LEDs are very useful in projects when you want to display some info to the user and also for confirming the states of your device like if it is working fine or if there is some error which might be affecting the working of... -
1K ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 1K ohm carbon film resistors with 1/4 Watt and 1% tolera...
This is a set of 10, 1K ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
5mm LED - Blue Color
A standard 5mm Blue color LED that can be used for indication or visualizatio...
A standard 5mm Blue color LED that can be used for indication or visualization purposes. It can be used on breadboard, dot board and PCB. You can also use LED mount to fix them onto casings or enclosures. The longer lead is the positive and... -
Resistor Combo Kit (30 values, 5 each - 150 resistors)
Quarter Watt (1/4W) resistors are the most used type of resistors that are us...
Quarter Watt (1/4W) resistors are the most used type of resistors that are used in simple electronic projects and DIY hobbyist projects. They come with long pliable leads which you can use to either plug in the breadboard holes or can be easily soldered... -
5mm LED - White Color
A standard 5mm white color LED that can be used for indication or visualizati...
A standard 5mm white color LED that can be used for indication or visualization purposes. It can be used on breadboard, dot board and PCB. You can also use LED mount to fix them onto casings or enclosures. The longer lead is the positive... -
5mm LED - Yellow Color
A standard 5mm Yellow color LED that can be used for indication or visualizat...
A standard 5mm Yellow color LED that can be used for indication or visualization purposes. It can be used on breadboard, dot board and PCB. You can also use LED mount to fix them onto casings or enclosures. The longer lead is the positive and... -
1K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 1k ohm carbon film resistors with 1/4 Watt and 5% tolera...
This is a set of 10, 1k ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and... -
Small Piezoelectric Buzzer - 5V Passive Buzzer
This is Small PCB Mountable 5V Passive Buzzer. It is great to add Audio Alert...
This is Small PCB Mountable 5V Passive Buzzer. It is great to add Audio Alert to your electronic designs. It operates on 5V supply, uses a coil element to generate an audible tone. Important: This is a Passive buzzer and not a Active Buzzer, meaning... -
RGB LED - 5mm - Common Cathode
The 4 leg RGB LED is an ideal component that can be used in projects that r...
The 4 leg RGB LED is an ideal component that can be used in projects that require multicolor displays. A single RGB LED serves the purpose of three individual different colour LEDs. The RGB name stands for Red colour, Blue colour, and Green colour... -
10K ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 10K ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 10K ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
1N4007 General Purpose Rectifier Diode 1A
The 1N4007 is the most commonly used rectifier diode. It is commonly used in ...
The 1N4007 is the most commonly used rectifier diode. It is commonly used in rectifier circuits, protection circuits and regulator circuits. The lead near to the silver line is the cathode and the other lead is anode, current is allowed to flow only form... -
10K Ohm Preset Potentiometer (POT)
A potentiometer is a variable resistor with three terminals, where Two termin...
A potentiometer is a variable resistor with three terminals, where Two terminals are connected to a resistive element and the third terminal is connected to an adjustable round wiper. The position of the wiper determines the output voltage. This 10K ohm compact linear Potentiometer with plastic dust-cap is suitable for... -
220 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 220 ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 220 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
10uF 50V Electrolytic Capacitor
This 10uF 50V capacitor is a good quality radial polarized Electrolytic capac...
This 10uF 50V capacitor is a good quality radial polarized Electrolytic capacitor. Electrolytic capacitors are widely used in switched-mode power supplies, DC-DC converters, and power supplies. This capacitor has a long life, low leakage current, and wide operating range. Product Description of 10uF 50V Electrolytic Capacitor Features... -
10K ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 10K ohm carbon film resistors with 1/4 Watt and 1% toler...
This is a set of 10, 10K ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
220 ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 220 ohm carbon film resistors with 1/4 Watt and 1% toler...
This is a set of 10, 220 ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
100uF 25V Radial Electrolytic Capacitor
Electrolytic capacitors are widely used in switched-mode power supplies, DC-D...
Electrolytic capacitors are widely used in switched-mode power supplies, DC-DC converters and power supplies. These capacitor are available in high capacitance and voltage rating than ceramic capacitors. The longer lead is the positive lead and the shorter lead is the negative lead, reversing the... -
10K Ohm Potentiometer - Large 3 Pin 15mm Potentiometer
Potentiometers are very useful in changing the electrical parameters of a sys...
Potentiometers are very useful in changing the electrical parameters of a system. It is a resistive type potentiometer which you can use to change RC constant of a circuit, changing the voltage level at comparator, changing the audio output volume, changing the brightness of... -
10K ohm 2 Watt Resistor (Pack of 4)
This is a packet of four Carbon Film Resistors (CFR). The resistance of each ...
This is a packet of four Carbon Film Resistors (CFR). The resistance of each is 10K Ohm and the rated power is 2W. The main function of carbon film resistors is to reduce the current flow in a circuit. It can be used for current limiting, voltage division,... -
100000 pF (0.1uF) 50V Ceramic Capacitor (Pack of 5)
Ceramic Capacitors are low cost and high speed switching capacitors. They are...
Ceramic Capacitors are low cost and high speed switching capacitors. They are normally used for noise filtering, tuning, coupling and other applications. They can also be found it RC, LC and RLC filters. Ceramic capacitor can switch faster than electrolytic capacitors, but they are... -
1N5408 General Purpose Rectifier Diode
The 1N5408 is a power rectifier diode with a maximum forward current of 3A an...
The 1N5408 is a power rectifier diode with a maximum forward current of 3A and voltage drop of 1V. It is commonly used in Switching or rectifying applications. The specifications of the 1N5408 diode are: Forward Voltage Drop: 1V (at 3A) Forward current: 3A Peak Forward... -
5mm IR Transmitter LED
An IR transmitter LED emits IR light when powered. This light is not visible ...
An IR transmitter LED emits IR light when powered. This light is not visible to human eyes, but can be captures by cameras. Hence commonly used in security camera, it can also be found in IR proximity sensor or line follower sensor in combination... -
1k ohm 2 Watt Resistor (Pack of 4)
This is a packet of four Carbon Film Resistors (CFR). The resistance of each ...
This is a packet of four Carbon Film Resistors (CFR). The resistance of each is 1K Ohm and the rated power is 2W. The main function of carbon film resistors is to reduce the current flow in a circuit. It can be used for current limiting, voltage division,... -
1000uF 50V Electrolytic Capacitor
This 1000uF 50V capacitor is a good quality radial polarized Electrolytic cap...
This 1000uF 50V capacitor is a good quality radial polarized Electrolytic capacitor. Electrolytic capacitors are widely used in switched-mode power supplies, DC-DC converters, and power supplies. This capacitor has a long life, low leakage current, and wide operating range. Product Description of 1000uF 50V Electrolytic Capacitor Note: Image... -
Photodiode - 5mm IR Receiver LED
An IR photodiode can be used to detect IR light. It is commonly used in secur...
An IR photodiode can be used to detect IR light. It is commonly used in security camera, it can also be found in IR proximity sensor or line follower sensor in combination with IR transmitter. The diode allows some current to flow through it... -
AMS1117 – 3.3V, 1A / SMD Voltage Regulator
The AMS1117 3.3 is a low dropout three-terminal voltage regulator with 1A out...
The AMS1117 3.3 is a low dropout three-terminal voltage regulator with 1A output current capability and output voltage of 3.3V. These devices have been optimized for low voltage where transient response and minimum input voltage are critical. The AMS1117 3.3 voltage regulator is easy... -
100K ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 100K ohm carbon film resistors with 1/4 Watt and 1% tole...
This is a set of 10, 100K ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
100 Ohm 2 Watt Resistor (Pack of 4)
This is a packet of four Carbon Film Resistors (CFR). The resistance of each ...
This is a packet of four Carbon Film Resistors (CFR). The resistance of each is 100 Ohm and the rated power is 2W. The main function of carbon film resistors is to reduce the current flow in a circuit. It can be used for current limiting, voltage division,... -
100uF 16V Electrolytic Capacitor
A capacitor is a passive element which can store a charge when a voltage is...
A capacitor is a passive element which can store a charge when a voltage is applied across it. The charge storing capacity can be determined by product of the capacitance of the capacitor and voltage applied across it. The value of the voltage and capacitance are mentioned on...
Passive Components
Close
Sidebar
Categories
- Development Boards
-
Sensor Modules
- Color Sensors
- Current Sensors
- Distance Sensors
- Fingerprint Sensors
- Flex Sensors
- Flow Sensors
- Gas Sensors
- Hall/Magnet Sensors
- Heartbeat Sensors
- Humidity Sensors
- Temperature/Humidity Sensors
- IR/Motion Sensors
- Light Sensors
- Motion/Tilt Sensors
- PH Sensors
- Pressure Sensors
- Accelerometer and Gyrometer Sensors
- Proximity Sensors
- Rain/Soil Moisture Sensors
- Soil Sensors
- Sound Sensor
- Touch Sensors
- Vibration Sensors
- Voltage Sensors
- Water Level/Flow Sensors
- Weighing Sensors
- RFID Tags and Modules
- Semiconductors & Prototyping Components
- Batteries, Power Supplies & Accessories
- Wireless & IoT Products
- Switches, Relays & Protection
- Lighting & LEDs
- Motors, Drivers & Pumps
- Wires, Cables & Connectors
- Robotics & DIY Learning Kits
- 3D Printers & Parts
- SMD Components
- Electronic Modules
- Drone Components
- Hardware Instruments & Tools
- Displays
- Shop By Brand
- Choosing a selection results in a full page refresh.