-
XH-W3001 AC 220V 1500W Digital Microcomputer Thermostat Switch
The XH-W3001 AC 220V 1500W Digital Temperature Microcomputer Thermostat Swit...
The XH-W3001 AC 220V 1500W Digital Temperature Microcomputer Thermostat Switch is a low cost temperature measurement and controller tool with high accuracy and precision. It offers temperature control range from -50℃ to 110℃ with high-temperature control precision of 0.1℃. XH-W3001 AC 220V 1500W Digital Thermostat Features: ... -
5V 600mA DC-DC Step-up Booster Module for single cell battery
DC power controllers are required when we are using any DC equipment like mob...
DC power controllers are required when we are using any DC equipment like mobile battery charger, small DC motors, DC lighting circuits, etc applications. In case of battery chargers almost all of mobile phones charges at 5V DC power supply and the charger brick... -
TP5000 1A Lithium Ion (4.2V) and Phosphate (3.6V) Battery Charger Module
The TP5000 Battery Charger Module is a compact and efficient 1A charging solu...
The TP5000 Battery Charger Module is a compact and efficient 1A charging solution for both Lithium-Ion (4.2V) and LiFePO4 (3.6V) batteries. It features automatic voltage selection, high charging efficiency, and built-in overcurrent and thermal protection, making it ideal for DIY battery packs, power banks,... -
ISD1820 Sound/Voice Recorder Module with Speaker
The ISD1820 is a record and playback module that can record a sound and play ...
The ISD1820 is a record and playback module that can record a sound and play it whenever required. The module comes with a microphone to record the sound and an 8-ohm speaker to play the recorded sound. By default, the recording time is 8... -
MQ-3 Gas Sensor Module for Alcohol Detection
MQ3 Gas Sensor is another one of MQ family of gas sensors which is used to de...
MQ3 Gas Sensor is another one of MQ family of gas sensors which is used to detect the alcohol content from 0.05 mg/L to 10 mg/L. It has a sensing element made of Tin Dioxide (SnO2) which has lower conductivity in clean air but... -
30A Smart Solar Charge Controller with Timer and USB Mobile Charger Socket
The 30A Smart Solar Charge Controller is designed for efficient solar power m...
The 30A Smart Solar Charge Controller is designed for efficient solar power management, ensuring stable charging and protection for 12V and 24V battery systems. It features an intelligent timer function, a USB charging port, and multiple safety protections to optimize solar energy usage in off-grid... -
Dog Barking Animal Music Sound Module for DIY
A useful as well as single module to produce dog barking musical sound that c...
A useful as well as single module to produce dog barking musical sound that can be easily interfaced with speakers and a simple power supply without the need of additional amplifier units. The module has a non-removable chip and easy-to-connect PCB leads for trouble-free... -
DS3231 RTC Module Without Coin Cell (AT24C32)
The DS3231 RTC module is a low-cost real-time clock that is commonly used wit...
The DS3231 RTC module is a low-cost real-time clock that is commonly used with microcontrollers to keep track of real-world Date and Time. The module consists of two important ICs namely DS3231 and AT24C32 IC with a crystal oscillator, and a temperature sensor. The... -
MQ-5 Methane/LPG Gas Sensor Module
This MQ5 gas sensor is used in gas leakage detection, and suitable for home a...
This MQ5 gas sensor is used in gas leakage detection, and suitable for home and industrial equipments for LPG, natural gas, coal gas detection and monitoring. The sensitive material used in the MQ5 gas sensor is SnO2, which has lower conductivity in clean air. When the target combustible gases exist in... -
BMP280 Pressure and Temperature Sensor Module (Barometer)
The BMP280 is a high precision pressure sensor module from Bosch. The sensor ...
The BMP280 is a high precision pressure sensor module from Bosch. The sensor can measure both atmospheric pressure and temperature with an accuracy of 0.1hPa and 0.1*C respectively. It is commonly used in barometer or altimeter. It operates on 3.3V and can communicate through... -
HT12E (RF Encoder) IC
The HT12E Encoder ICs are series of CMOS LSIs for Remote Control system appli...
The HT12E Encoder ICs are series of CMOS LSIs for Remote Control system applications. They are capable of Encoding 12 bit of information (HT12E is paired with HT12D) which consists of 8 address bits and 4 data bits. Each address and data input is... -
DS1307 Real Time Clock RTC Module
This is an RTC DS1307 module that comes with a CR2032 battery holder. The RTC...
This is an RTC DS1307 module that comes with a CR2032 battery holder. The RTCs are widely used where timekeeping is necessary. It can be used to show the current time i.e. real-time. Also, this module can be used to make an alarm clock also.... -
HT12D (RF Decoder) IC
The HT12D Decoder ICs are series of CMOS LSIs for Remote Control system appli...
The HT12D Decoder ICs are series of CMOS LSIs for Remote Control system applications. For proper operation a pair of encoder/decoder with the same number of address and data format should be selected (HT12E is paired with HT12D). The Decoder receive the serial address... -
XY-BT Bluetooth 4.1 MP3 Decoder Module - HW770 Mini Bluetooth Receiver
The HW-770 Bluetooth 4.1 MP3 Decoder Module packs a lot of features into a sm...
The HW-770 Bluetooth 4.1 MP3 Decoder Module packs a lot of features into a small package. Supporting Bluetooth 4.1 connectivity, you'll get superior sound quality and lower latency, perfect for audio applications. With its 24-bit audio resolution and MP3 decoding, you get crystal-clear audio... -
4x3 Matrix Membrane Type Keypad
This 4x3 keypad module has a total 12 different keys and comes in 4x3 matrix....
This 4x3 keypad module has a total 12 different keys and comes in 4x3 matrix. The keypad comes in stripped form connectors which can directly be attached to the respective microcontroller development board. 4x3 matrix 12 key flexible keypad Specifications: 4 x 3 Matrix... -
12V 2A AC to DC - Switch Mode Power Supply Module (SMPS) PCB Board
Features : Switch Mode Power Supply range for OEMs. 180-240 Volts AC 12 Volt...
Features : Switch Mode Power Supply range for OEMs. 180-240 Volts AC 12 Volts 2 AMP 24 Watts Single outputs. Specifications: Input Voltage: 220V AC Output Voltage: ~12V DC Dimension: 76mmx40mmx22mm -
Vibration/Shock Sensor Module (SW420)
The SW420 Vibration Sensor Module is based on SW-420 Vibration Sensor, which ...
The SW420 Vibration Sensor Module is based on SW-420 Vibration Sensor, which works on the principle that when the movement or vibration occurs, the circuit will be briefly disconnected and output low. Hence the normal state of this sensor is closed. The sensitivity of... -
Micro SD Card Reader - Adapter Module
SD cards are often used along with microcontrollers to store and retrieve the...
SD cards are often used along with microcontrollers to store and retrieve the huge amount of data, mostly in data logging or visualization applications. This SD card module will help us to easily Interface an SD card with Microcontrollers. The micro SD card... -
3.7V 1800mAH Li-Po Rechargeable Battery (KP 523450)
The 3.7V 1800mAh iI-po rechargeable battery is a high-capacity and high-outpu...
The 3.7V 1800mAh iI-po rechargeable battery is a high-capacity and high-output power source suitable for portable electronic devices. Its Li-po chemistry offers a high energy density and low self-discharge rate, making it a lightweight and environmentally friendly option that can be recharged multiple times. Lipo... -
TPA3118 PBTL Mono Digital Amplifier Board 12V 24V Power Amplifier Module 1X60W
This TPA3118 PBTL Mono Digital Amplifier Board 1X60W 12V 24V Power Amplifier ...
This TPA3118 PBTL Mono Digital Amplifier Board 1X60W 12V 24V Power Amplifier Module comes with very good sound quality. The module equips Mono digital audio power amplifier chip. It has high output and low power consumption. Important: The TPA3118 IC on this module is a 28pin generic IC that... -
3.3V Adapter Board for NRF24L01 Wireless Module
The 3.3V Adapter Board for NRF24L01 is specifically designed to provide stabl...
The 3.3V Adapter Board for NRF24L01 is specifically designed to provide stable 3.3V power to the NRF24L01 wireless transceiver module. Many microcontrollers operate at 5V logic, but the NRF24L01 module requires 3.3V input. This adapter board acts as a voltage regulator and logic level... -
KY-037 Microphone LM393 Sound Detection Module
The KY-037 Voice Recognition Sensor is a sound detection module that can be u...
The KY-037 Voice Recognition Sensor is a sound detection module that can be used to recognize sound and vibration. It includes a highly sensitive microphone and an LM393 comparator to provide both analog and digital outputs. The analog output (AO) provides a real-time voltage... -
DIY Heatsink Thermoelectric Peltier Refrigeration Cooling System Kit (Peltier Module Not Included)
The Thermoelectric Peltier Refrigeration Cooling System Kit is an efficient a...
The Thermoelectric Peltier Refrigeration Cooling System Kit is an efficient and compact cooling solution that combines semiconductor technologies with electronic assembly techniques. This kit features a TEC1-12706 12V 92W Thermoelectric Peltier Cooler Module, providing robust cooling performance. The system includes two heat sinks: a... -
XH-M601 12V Intelligent Battery Charging Control Board
The XH-M601 is an intelligent charging control board designed for 12V storage...
The XH-M601 is an intelligent charging control board designed for 12V storage batteries. With built-in adjustable potentiometers and precise voltage control, this module ensures safe and efficient charging while extending battery life. It automatically starts and stops charging based on user-defined voltage thresholds, making... -
3-6V DC to 400KV Step up Power Module
This high voltage step-up power module efficiently converts 3-6V from a stand...
This high voltage step-up power module efficiently converts 3-6V from a standard Li-ion battery into a voltage upto 400KV, using Tesla coil principles. Ideal for electronic experiments and demonstrations, it is compact, user-friendly, and equipped with high-quality silicone wires at both input and output.... -
Voltage Sensor Module (0-25V)
This is a basic Voltage Detection Sensor module to measure the voltage across...
This is a basic Voltage Detection Sensor module to measure the voltage across two terminals. The module operates in 5V and can measure voltage from 0V to 25V using a potential divider circuit. A pair of high precession resistors form a voltage divider circuit... -
DC5V Humidifier / Mist Maker USB Spray DIY Module
This is a compact USB humidifier featuring a built-in driver for seamless ope...
This is a compact USB humidifier featuring a built-in driver for seamless operation. Automatically starts working upon power-on, delivering consistent performance with advanced ultrasonic technology. Features: Integrated driver for hassle-free use Automatic operation with power-on trigger High-frequency 108KHz oscillator for fine mist generation Micron-level... -
A4988 Stepper Motor Driver Module with Heatsink
The A4988 is a popular and easy to use Stepper Motor Driver module that can b...
The A4988 is a popular and easy to use Stepper Motor Driver module that can be used to control the speed and direction of a stepper motor. The module is based on A4988 Driver IC and has a built-in translator which makes it easy... -
8 Channel 5V Relay Module with Optocoupler
Relays are important part of any electrical and electronic circuits. We use r...
Relays are important part of any electrical and electronic circuits. We use relays in control applications, switching applications, circuit protection applications and load transfer applications. Relays are also used to provide electrical isolation between two circuits. This 8-channel Relay module comes with Optocoupler protection... -
TP4056 1A Li-ion Battery Charging Module - Mini USB
This 5V 1A TP4056 module with mini USB port is a constant-current / constant ...
This 5V 1A TP4056 module with mini USB port is a constant-current / constant voltage linear charger for single cell lithium-ion batteries. It's SOP package and low external component count make the TP4056 ideally suitable for portable applications. TP4056 Module Specifications: Input voltage :... -
ULN2003 Stepper Motor Driver Module
ULN2003 IC is one of the most commonly used Motor driver IC. This IC comes in...
ULN2003 IC is one of the most commonly used Motor driver IC. This IC comes in handy when we need to drive high current loads using digital logic circuits like Op-maps, Timers, Gates, Arduino, PIC, ARM etc. For example a motor that requires 9V and 300mA... -
SIM900 GSM/GPRS Module
The GSM-900 GSM/GPRS module is a readily available GSM/GPRS module, which can...
The GSM-900 GSM/GPRS module is a readily available GSM/GPRS module, which can provide the network connectivity to your project. It can do all the work your mobile phone would do like making a call, receive a call, send a message, connect to the internet...