-
ESP32 Camera Development Board WiFi+Bluetooth Module with OV2640, OV3660
The ESP32-CAM is an Original ESP32 CAM WiFi+Bluetooth module board along with...
The ESP32-CAM is an Original ESP32 CAM WiFi+Bluetooth module board along with OV2640 or RHYX-M21-45 Camera Module. This product is based on the ESP32 chip with the additional facility of using a camera. That means, the features of ESP32, especially the Bluetooth and the... -
25 Watt Low Cost Soldering Iron with LED Power Indicator - Normal Tip
This is Red Plus 25W Soldering Iron with LED Power Indicator, ideal for begin...
This is Red Plus 25W Soldering Iron with LED Power Indicator, ideal for beginners. This low cost soldering iron comes with the light and heat resistant handle, and replaceable soldering bit. It attains full operating Temperature within few seconds and maintains constant tip temperature.... -
Motion Detection and Switching Sensor Module for Home Automation MR-HW08KT
Specifications: Max Load: <40W Input Voltage: 220-240V AC Input Frequency:...
Specifications: Max Load: <40W Input Voltage: 220-240V AC Input Frequency: 50/60Hz Holder Size: 26MM Light Sensitivity: Variable between 2Lux, 25 Lux and Disable Time Duration: Variable between 5Min, 45Sec and 15Sec Range of Detection: 4-6m Model: MR-HW08KT -
10K Ohm Preset Potentiometer (POT)
A potentiometer is a variable resistor with three terminals, where Two termin...
A potentiometer is a variable resistor with three terminals, where Two terminals are connected to a resistive element and the third terminal is connected to an adjustable round wiper. The position of the wiper determines the output voltage. This 10K ohm compact linear Potentiometer with plastic dust-cap is suitable for... -
DHT11 Temperature and Humidity Sensor Module
DHT11 is a popular temperature and humidity based digital sensor. There is an...
DHT11 is a popular temperature and humidity based digital sensor. There is an upgraded version of the DHT11 temperature and humidity sensor available, which is DHT22 Sesnor with higher sensing ranges. The sensor uses a capacitive humidity sensor and a thermistor based temperature sensor... -
Rechargeable AA Battery 1.2V 2500mAh - (Pack of 2)
This is a rechargeable AA Ni-MH battery from Power Bee is suitable for light-...
This is a rechargeable AA Ni-MH battery from Power Bee is suitable for light-duty and hobby-grade applications where frequent replacements for AAA Alkaline batteries like Duracell, every day, etc. While the label states 2500mAh capacity, please note that these are hobby-grade cells and the... -
Rechargeable AAA Battery 1.2V 1100mAh - (Pack of 2)
This is a rechargeable AAA Ni-MH battery from Power Bee is suitable for light...
This is a rechargeable AAA Ni-MH battery from Power Bee is suitable for light-duty and hobby-grade applications where frequent replacements for AAA Alkaline batteries like Duracell, every day, etc. While the label states 1100mAh capacity, please note that these are hobby-grade cells and the... -
220 ohm, 1/4 Watt Resistor with 5% tolerance (Pack of 10)
This is a set of 10, 220 ohm carbon film resistors with 1/4 Watt and 5% toler...
This is a set of 10, 220 ohm carbon film resistors with 1/4 Watt and 5% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
Uno R3 ATmega328P Compatible Development Board- Compatible with Arduino - DIP Version (Without Cable)
The Uno R3 is an ATmega328P microcontroller-based development board. This is ...
The Uno R3 is an ATmega328P microcontroller-based development board. This is widely popular in Embedded electronics because of the available resources and easy to use by everybody features. With 14 digital input/output pins where 6 can be configured and used as PWM outputs, 6... -
12V SPDT Relay
This is the 12V relay most commonly used switching device in electronics. It ...
This is the 12V relay most commonly used switching device in electronics. It is commonly used in Home Automation projects to switch AC loads, To Control (On/Off) Heavy loads at a pre-determined time/condition, Used in safety circuits to disconnect the load from supply in... -
10uF 50V Electrolytic Capacitor
This 10uF 50V capacitor is a good quality radial polarized Electrolytic capac...
This 10uF 50V capacitor is a good quality radial polarized Electrolytic capacitor. Electrolytic capacitors are widely used in switched-mode power supplies, DC-DC converters, and power supplies. This capacitor has a long life, low leakage current, and wide operating range. Product Description of 10uF 50V Electrolytic Capacitor Features... -
Soldering Bit Cleaner Foam Pad
The Soldering Bit Cleaner Foam Pad is an essential tool for maintaining the p...
The Soldering Bit Cleaner Foam Pad is an essential tool for maintaining the performance and longevity of your soldering iron tip. Designed for quick and efficient cleaning, this foam pad keeps your soldering bit free from oxidation and debris, ensuring optimal heat transfer and... -
170 points Mini Breadboard - Solderless breadboard
While designing and developing any electronics system major steps are design ...
While designing and developing any electronics system major steps are design then prototype and debug and then the system moves to the final production stage. All these stages are very important for the development of the system. After designing the circuit prototyping requires you... -
10K ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 10K ohm carbon film resistors with 1/4 Watt and 1% toler...
This is a set of 10, 10K ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
Heat Shrink Sleeve Tube - 4mm Diameter - Black - 1 meter
Heat Shrink Tube is required when you want to build your wiring harness to be...
Heat Shrink Tube is required when you want to build your wiring harness to be resistant to abrasion, scrubbing and provide insulation to stranded and solid wire conductors, joints, connectors and terminals in the electrical systems. It is a plastic tube which shrinks rapidly when exposed to heat which... -
220 ohm, 1/4 Watt Resistor with 1% tolerance (Pack of 10)
This is a set of 10, 220 ohm carbon film resistors with 1/4 Watt and 1% toler...
This is a set of 10, 220 ohm carbon film resistors with 1/4 Watt and 1% tolerance. Each resistor has strong leads and easy-to-read color coding for breadboarding. In addition, the leads are about 0.55 mm in diameter and are constructed of tin and copper plated over steel wire. This... -
BLDC 30A ESC - Brushless DC Motor Electronic Speed Controller
Electronic Speed Controllers (ESC) are used in Quadcopters and other types of...
Electronic Speed Controllers (ESC) are used in Quadcopters and other types of Drones to control the speed of BLDC Motor. This 30A ESC can be power with LiPo Batteries (2S-3S) and can drive BLDC motors like the A2212, with a maximum current of 30A.... -
Heat Shrink Sleeve Tube - 5mm Diameter - Black - 1 meter
Heat Shrink Tube is required when you want to build your wiring harness to be...
Heat Shrink Tube is required when you want to build your wiring harness to be resistant to abrasion, scrubbing and provide insulation to stranded and solid wire conductors, joints, connectors and terminals in the electrical systems. It is a plastic tube which shrinks rapidly when exposed to heat which... -
Wire Stripper
The Multitec Wire Stripper/ Cutter is made up of high-grade steel alloy for m...
The Multitec Wire Stripper/ Cutter is made up of high-grade steel alloy for maximum strength and durability. The handles are insulated with plastic for comfort grip and greater torque. It is a one tool solution for two operations: Cutting and Stripping wires. The Stripper... -
18650 Li-ion 2200mAh Rechargeable Battery Copy
18650 battery is a Li-ion rechargeable battery with a 2200 mAh Battery Capaci...
18650 battery is a Li-ion rechargeable battery with a 2200 mAh Battery Capacity. This is not a standard AA or AAA battery but is very useful for applications that require continuous high current or high current in short bursts like in cameras, DVD players, iPod,... -
18650 Li-ion 2200mAh Rechargeable Battery (Original)
18650 battery is a Li-ion rechargeable battery with a 2200 mAh Battery Capaci...
18650 battery is a Li-ion rechargeable battery with a 2200 mAh Battery Capacity. This is a standard AA or AAA battery. It is very useful for applications that require continuous high current or high current in short bursts like in cameras, DVD players, iPod, etc.... -
RS-775 DC motor 12V to 24V - High Torque
The 775 Motor a.k.a 555 Motor is a Multipurpose Brushed DC Motor that is comm...
The 775 Motor a.k.a 555 Motor is a Multipurpose Brushed DC Motor that is commonly used in PCB Drill machines and other drilling and cutting purposes. Specifications of 775 DC Motor Shaft Diameter is 4.7mm Length of Shaft is 16mm Length of Motor is... -
18650 Li-ion 2600mAh Rechargeable Battery - Original
This is an original 2600mAh 18650 battery from Hongli. The cell can be char...
This is an original 2600mAh 18650 battery from Hongli. The cell can be charged and discharged up to 1000 cycles without much loss in battery capacity. They are safe to use, environment friendly and have long battery life. It comes with high energy density and provides... -
100uF 25V Radial Electrolytic Capacitor
Electrolytic capacitors are widely used in switched-mode power supplies, DC-D...
Electrolytic capacitors are widely used in switched-mode power supplies, DC-DC converters and power supplies. These capacitor are available in high capacitance and voltage rating than ceramic capacitors. The longer lead is the positive lead and the shorter lead is the negative lead, reversing the... -
Soldering Iron Stand
Soldering Irons are the most used component in all DIY electronics, you have ...
Soldering Irons are the most used component in all DIY electronics, you have to solder components on your perf-boards, or PCBs. Even if they are through hole type or SOT type you have to use a soldering Iron to solder them on the board.... -
10K Ohm Potentiometer - Large 3 Pin 15mm Potentiometer
Potentiometers are very useful in changing the electrical parameters of a sys...
Potentiometers are very useful in changing the electrical parameters of a system. It is a resistive type potentiometer which you can use to change RC constant of a circuit, changing the voltage level at comparator, changing the audio output volume, changing the brightness of... -
Round Push Rocker Switch - 3A 250V
This is a latched type push on/off button rocker switch with current ratings ...
This is a latched type push on/off button rocker switch with current ratings of 3A and 250VAC for mounting on boards for your electric/electronic devices. The switch is normally open (NO) when pressed it closes the connection (NC) and then when released it becomes NO... -
Breadboard (GL-12 840 Points)
A breadboard is the most commonly used tool when designing new circuits. This...
A breadboard is the most commonly used tool when designing new circuits. This GL-12 Breadboard is a high-quality breadboard with 830 Points. The board has well-designed holes that snug in components smoothly and enables high re-usability. The board also has an adhesive tape behind... -
XT60 Connector - Male and Female Pair
This is a standard quality male and female XT60 connectors combo commonly use...
This is a standard quality male and female XT60 connectors combo commonly used for drones, and RC car applications. Package Includes: 1 x Male and Female XT60 Connector -
16x2 (1602) LCD Display (Blue Backlight)
The 16x2 is the most commonly used LCD display module. It can display 16 char...
The 16x2 is the most commonly used LCD display module. It can display 16 characters in a column for 2 rows thus a total of 32 characters. The characters can either be number, alphabets or symbol. It is also possible to create your own... -
Eye Blink Sensor with Goggles
Eye Blink Sensor Module is compatible with Arduino, Raspberry Pi, AVR, PIC. T...
Eye Blink Sensor Module is compatible with Arduino, Raspberry Pi, AVR, PIC. This Eye Blink sensor senses the eyeblink using infrared. The Variation Across the eye will vary as per eye blink. If the eye is closed the output is high otherwise the output is low.... -
Rain Drop Sensor Module
Raindrop Sensor is a tool used for sensing rain. It consists of two modules, ...
Raindrop Sensor is a tool used for sensing rain. It consists of two modules, a rain board that detects the rain and a control module, which compares the analog value, and converts it to a digital value. The Rain Drop Sensor Module can be powered with +5V and has...
All Products
Close
Sidebar
Categories
- Development Boards
-
Sensor Modules
- Color Sensors
- Current Sensors
- Distance Sensors
- Fingerprint Sensors
- Flex Sensors
- Flow Sensors
- Gas Sensors
- Hall/Magnet Sensors
- Heartbeat Sensors
- Humidity Sensors
- Temperature/Humidity Sensors
- IR/Motion Sensors
- Light Sensors
- Motion/Tilt Sensors
- PH Sensors
- Pressure Sensors
- Accelerometer and Gyrometer Sensors
- Proximity Sensors
- Rain/Soil Moisture Sensors
- Soil Sensors
- Sound Sensor
- Touch Sensors
- Vibration Sensors
- Voltage Sensors
- Water Level/Flow Sensors
- Weighing Sensors
- RFID Tags and Modules
- Semiconductors & Prototyping Components
- Batteries, Power Supplies & Accessories
- Wireless & IoT Products
- Switches, Relays & Protection
- Lighting & LEDs
- Motors, Drivers & Pumps
- Wires, Cables & Connectors
- Robotics & DIY Learning Kits
- 3D Printers & Parts
- SMD Components
- Electronic Modules
- Drone Components
- Hardware Instruments & Tools
- Displays
- Shop By Brand
- Choosing a selection results in a full page refresh.