-
Free Shipping
On prepaid orders above INR 500
-
Cash On Delivery
COD available for orders above INR 500
-
3-5 Days Delivery
Shipped within 24 hrs
-
Dedicated Support
Mon to Sat - 10 AM to 6.30 PM
74HC595 - 8-bit Serial-to-Parallel Shift Register IC
The 74HC595 is an 8-bit Serial In – Parallel Out Shift Register, i.e., it can receive (input) data serially and control 8 output pins in parallel. This comes in very handy where do not have enough GPIO pins on our MCU/MPU to control the required number of outputs. It is often used in projects where relatively a large number of LED’s has to be controlled through the Microcontroller. It can also be used to interface LCD screen since they can act as the data bit for the LCD displays. It can also be used to control 5V loads like relays through a 3.3V microcontroller since the high-level voltage is only 3.15. So, if you are looking for an IC to save on your GPIO pins on the Microcontroller then this IC might be the right choice for you. It has operating voltage range of 2-6V and operating current of 80uA. Minimum high-level Input Voltage: 3.15V @Vcc=4.5V and Maximum low-level Input Voltage: 1.35V @Vcc=4.5V. You can interface it with Arduino, RaspberryPi, ESP32, PIC microcontrollers etc.
Specifications
- Operating Voltage: 2V to 6V
- Power Consumption: 80uA
- Output source/sink current: 35mA
- Output Voltage is equal to Operating voltage
- Minimum high-level Input Voltage: 3.15V @(Vcc=4.5V)
- Maximum low-level Input Voltage: 1.35V @(Vcc=4.5V)
- Can be easily cascaded with more IC to get more outputs
- Available in PDIP package
Product Description
You need to power the device through Vcc and GND pins QA to QH are Parallel Output pins. SER pin is the Serial Input OEbar is output enable SRCLK is serial clock input and SRCLR bar is serial reset button.
Additional Resources
Interfacing ESP32 with 7 segment display
Package Contents
1×74HC595 - 8-bit Serial-to-Parallel Shift Register IC
Returns Policy
Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.
1. Damaged During Shipment
If you receive a product damaged during shipment, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.2. Wrong Item Shipped
If your item looks different from what is shown in the image on our website, we will take the item back and provide a refund or replacement as per your choice.
Limitation of Returns
We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product. Returns are accepted only with 3 days from the date of delivery.Shipping
We ship to all over India with free shipping on all prepaid orders above 500. For Cash on Delivery orders INR 80 will be charged for orders below INR 599 and INR 30 will be charged for the orders above 599. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.
Please note that the Minimum Order Value is INR 500 for COD orders.