Electronics Projects

Sidebar

Categories

Featured Products

G-energy B0505LS-1WR3 5V To 5V 200mA 1W DC - DC Converter G-energy B0505LS-1WR3 5V To 5V 200mA 1W DC - DC Converter
Q
G-energy B0505LS-1WR3 5V To 5V 200mA 1W DC - DC Converter

G-energy B0505LS-1WR3 5V To 5V 200mA 1W DC - DC Converter is a compact isolat...

G-energy B0505LS-1WR3 5V To 5V 200mA 1W DC - DC Converter is a compact isolated DC-DC converter designed to provide a regulated-isolation interface between two 5V DC circuits. The B0505LS-1WR3 accepts a 4.5V to 5.5V input and provides a single 5V output at up...
Rs. 65.00
Heat Shrink Sleeve Tube Flat - 10 mm Diameter Heat Shrink Sleeve Tube Flat - 10 mm Diameter - Black - 1 meter
Q
Heat Shrink Sleeve Tube Flat - 10 mm Diameter - Black - 1 meter

Heat Shrink Sleeve Tube Flat - 10 mm Diameter - Black - 1 meter is a flexible...

Heat Shrink Sleeve Tube Flat - 10 mm Diameter - Black - 1 meter is a flexible heat-shrinkable sleeve designed for electrical insulation, wire protection, cable bundling, terminal insulation, and battery-pack assembly. The sleeve is supplied in a flat form and contracts when heated,...
Rs. 24.00
SMD Resistor 1206 Package
Q
1 Ohm (1R00) 1206 Package 1/4W SMD Resistor 5% Tolerance (Pack of 20)

1 Ohm (1R00) 1206 Package 1/4W SMD Resistor 5% Tolerance  is a surface-mount ...

1 Ohm (1R00) 1206 Package 1/4W SMD Resistor 5% Tolerance  is a surface-mount chip resistor designed for general-purpose electronic circuits requiring a 1Ω resistance value. Manufactured by Yageo, it features a 1206 compact SMD package, 0.25W (1/4W) power rating, and ±5% resistance tolerance. Its thick-film...
Rs. 8.00
SB50 Anderson Connector 2 Pin Set - Thimble Pins Only SB50 2 Pin Set - Thimble Pins Only
Q
SB50 Anderson Connector 2 Pin Set - Thimble Pins Only

SB50 Anderson Connector 2 Pin Set - Thimble Only Pins is a set of two high-cu...

SB50 Anderson Connector 2 Pin Set - Thimble Only Pins is a set of two high-current metal contact pins designed for use with compatible SB50 Anderson connector housings. These contacts feature a copper body with silver plating and are designed for crimping onto 6...
Rs. 42.00
Interface MQ9 Gas Sensor with Arduino

How to Interface MQ9 Gas Sensor with Arduino

Aniket Sharma 0 Comments

The MQ9 Gas Sensor is a member of the MQ Gas Sensors family. It operates as a Metal Oxide Semiconductor (MOS) gas sensor primarily designed to identify Carbon Monoxide, Methane, and Propane. It is capable of detecting concentrations of LPG, Propane, Hydrogen, Carbon Monoxide, and Methane gases. The sensor contains a sensitive element, primarily...
LPG Leakage Detection System

LPG Leakage Detection System using Mq-2 Gas Sensor and Arduino

Anand Gora 0 Comments

This IoT Project is submitted by Shantanu Kumar for IoT Contest organized by Quartz Components. The LPG Leakage Detection System (LLDS) is an advanced safety project designed to swiftly respond to LPG gas leaks in residential settings. When a gas leak is detected, LLDS takes the following actions: Electricity Disconnection: It immediately cuts off the electricity supply...