RadioMaster RP1 V2 ExpressLRS Nano Receiver is a compact, high-performance 2.4GHz ExpressLRS receiver designed for FPV racing, freestyle, and long-range drone applications. Powered by the ESP8285 MCU and Semtech SX1281 RF chip, it features a built-in TCXO for superior frequency stability, integrated Wi-Fi for wireless firmware updates, and a U.FL connector with a 65mm T-antenna for reliable long-range signal reception. It is compatible with all 2.4GHz ExpressLRS transmitters and modules.
Radiomaster RP1 V2 ExpressLRS Nano Receiver Manual
| Parameter | Value |
|---|---|
| Product Type | ExpressLRS Nano Receiver |
| Model | RadioMaster RP1 V2 |
| Protocol | ExpressLRS (ELRS) 2.4GHz |
| MCU | ESP8285 |
| RF Chip | Semtech SX1281 |
| Frequency Range | 2.404 – 2.479GHz |
| Telemetry Power | 10mW |
| Antenna | 65mm 2.4GHz T-Antenna (U.FL) |
| Bus Interface | CRSF |
| Working Voltage | 5V DC |
| Maximum Refresh Rate | 500Hz / F1000Hz |
| Minimum Refresh Rate | 25Hz |
| Wireless Configuration | Wi-Fi WebUI |
| Firmware | ExpressLRS v2.4 (Pre-installed) |
| Dimensions | 13 × 11 × 3mm |
| Weight | 2.2g (Including Antenna) |
| Applications | FPV Racing Drones, Freestyle Drones, Long-Range UAVs, RC Aircraft, Multirotors |
4CH 27MHZ Remote Transmitter & Receiver Board with Antenna
4CH 27MHZ Remote RF Transmitter & Receiver Board
1 × RadioMaster RP1 V2 ExpressLRS Nano Receiver
1 × 65mm 2.4GHz T-Antenna
1 × CRSF Wire
Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.
If you receive a product damaged during shipment, please notify us within 3 days of receiving the product, supported by proper pictures and a description. Once our support team accepts the return, we will provide a replacement or a complete refund, including the return shipping cost.
If your item looks different from what is shown in the image on our website, we will take the item back and provide a refund or replacement as per your choice.
We don’t accept returns for products damaged due to improper use. Moreover, we don’t accept returns if the ordered product is not suitable for a specific application. Please read the product specifications and datasheet carefully before placing an order. Returns are accepted only within 3 days from the date of delivery.
We ship all over India with free shipping on all prepaid orders above ₹500. For Cash on Delivery (COD) orders, ₹80 will be charged for orders below ₹599 and ₹30 for orders above ₹599.
For any questions related to shipping, please contact our support team at support@quartzcomponents.com.
Note: The minimum order value for COD orders is ₹500.