PCB ETCHING SOLUTION POWDER Ferrous Chloride PCB Etching Agent For Diy PCB Making Ferric
Sold Out

PCB ETCHING SOLUTION POWDER Ferrous Chloride PCB Etching Agent For Diy PCB Making Ferric PCB ETCHING SOLUTION POWDER Ferrous Chloride PCB Etching Agent For Diy PCB Making Ferric

QC0741

Out of stock

Rs. 49.00

In Electronics, PCB Design is an essential part but ordering a PCB and getting it on time is a difficult one especially for rapid prototyping purposes. Here comes the Ferric Chloride handy as it is useful to make hand-made PCB in no time.

This Ferric Chloride is an essential industry grade chemical that is useful for PCB etching in a proper way without the corrosion on the connected routing. Use the right amount of ferric chloride inadequate hot water and make PCB from copper clad boards. Does not matter if it is single sided or double sided.

 

Ferric Chloride Features & Specifications:

  • PRODUCT: FERRIC CHLORIDE (ANHYDROUS)
  • STRUCTURAL FORMULA: FeCl3
  • MOLECULAR WEIGHT: 162.5 gm/mole
  • PHYSICAL APPEARANCE: Greenish to Black crystalline powder 
  • PURITY: 98.00% 
  • Fe% : 33 Min
  • INSOLUBLE IN WATER: 0.5% Max
  • MOISTURE: 1.00% Max
  • Fecl2 salt: 0.10% Max
  • Net Weight: 50gm

Ferric Chloride Applications:

  • Etching in Copper Clad Board
  • Art using Copper Clad Board

Precaution and Safety:

  • Use hand gloves during usage
  • Keep out of reach in children
  • Wear smoke mask as the produced gas is dangerous for health
  • Keep your eyes well covered using glasses
  • Do not moisture the container and store in a cool and dry place.


Example Usage:

Ferric Chloride usage for PCB Etching

Additional Resources:

DIY Toner transfer in PCBs


Package Contains

1x 50gm Ferric chloride powder

In Electronics, PCB Design is an essential part but ordering a PCB and getting it on time is a difficult one especially for rapid prototyping purposes. Here comes the Ferric Chloride handy as it is useful to make hand-made PCB in no time.

This Ferric Chloride is an essential industry grade chemical that is useful for PCB etching in a proper way without the corrosion on the connected routing. Use the right amount of ferric chloride inadequate hot water and make PCB from copper clad boards. Does not matter if it is single sided or double sided.

 

Ferric Chloride Features & Specifications:

  • PRODUCT: FERRIC CHLORIDE (ANHYDROUS)
  • STRUCTURAL FORMULA: FeCl3
  • MOLECULAR WEIGHT: 162.5 gm/mole
  • PHYSICAL APPEARANCE: Greenish to Black crystalline powder 
  • PURITY: 98.00% 
  • Fe% : 33 Min
  • INSOLUBLE IN WATER: 0.5% Max
  • MOISTURE: 1.00% Max
  • Fecl2 salt: 0.10% Max
  • Net Weight: 50gm

Ferric Chloride Applications:

  • Etching in Copper Clad Board
  • Art using Copper Clad Board

Precaution and Safety:

  • Use hand gloves during usage
  • Keep out of reach in children
  • Wear smoke mask as the produced gas is dangerous for health
  • Keep your eyes well covered using glasses
  • Do not moisture the container and store in a cool and dry place.


Example Usage:

Ferric Chloride usage for PCB Etching

Additional Resources:

DIY Toner transfer in PCBs


Package Contains

1x 50gm Ferric chloride powder

Returns Policy

Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.

1. Manufacturing Defect
If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

2. Wrong Item Shipped

If you receive a different product then the ordered one, please contact us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

Limitation of Returns
We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product.

Shipping

We ship to all over India with flat shipping rate of INR 45 for all the orders below INR 599. For all the orders above INR 599, we offer a free shipping. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.

Returns Policy

Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.

1. Manufacturing Defect
If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

2. Wrong Item Shipped

If you receive a different product then the ordered one, please contact us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

Limitation of Returns
We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product.

Shipping

We ship to all over India with flat shipping rate of INR 45 for all the orders below INR 599. For all the orders above INR 599, we offer a free shipping. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.

Recently Viewed Products Recently Viewed Products
×
Welcome Newcomer