Ky017 Mercury Tilt Switch Module Ky017 Mercury Tilt Switch Module

QC0805

10 In stock

Rs. 39.00
-
+
Rs. 39.00
(inc. GST)
[Delivery: 2 to 5 days]            

Tilt sensors are used to measure the orientation from horizontal reference plane of any object. People use bubble method to identify orientation, string method and accelerometer to do that but it is one of the most important aspect of any RC plane or quadcopter flight to stop the orientation from going beyond a certain point from horizontal plane, also the same function for Robots and Autonomous vehicles. This KY017 Tilt Switch Sensor Module measures the orientation and if the orientation goes beyond a certain level it lights up an LED on the module and gives out a digital signal on the signal Pin which can be used to read by the Arduino or Raspberry Pi or any development board you are using by taking input on any of the GPIO pins on offer. The mercury ball in the glass envelop will either open or close the circuit with different orientations. It is small in size, economic and very easy to interface with any of the microcontroller you are using.

 

Specifications

  • Economic, Reliable and Small in size
  • Operating voltage 3.2Vdc-5Vdc
  • Output LED light Indicator
  • 3 Pin sensor Module
  • High Sensitivity

 

Component Description

Ky017-Mercury-Tilt-Switch-Module

 

Package Contents

1× Ky017 Mercury Tilt Switch Module

Tilt sensors are used to measure the orientation from horizontal reference plane of any object. People use bubble method to identify orientation, string method and accelerometer to do that but it is one of the most important aspect of any RC plane or quadcopter flight to stop the orientation from going beyond a certain point from horizontal plane, also the same function for Robots and Autonomous vehicles. This KY017 Tilt Switch Sensor Module measures the orientation and if the orientation goes beyond a certain level it lights up an LED on the module and gives out a digital signal on the signal Pin which can be used to read by the Arduino or Raspberry Pi or any development board you are using by taking input on any of the GPIO pins on offer. The mercury ball in the glass envelop will either open or close the circuit with different orientations. It is small in size, economic and very easy to interface with any of the microcontroller you are using.

 

Specifications

  • Economic, Reliable and Small in size
  • Operating voltage 3.2Vdc-5Vdc
  • Output LED light Indicator
  • 3 Pin sensor Module
  • High Sensitivity

 

Component Description

Ky017-Mercury-Tilt-Switch-Module

 

Package Contents

1× Ky017 Mercury Tilt Switch Module

Returns Policy

Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.

1. Manufacturing Defect
If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

2. Wrong Item Shipped

If you receive a different product then the ordered one, please contact us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

Limitation of Returns
We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product.

Shipping

We ship to all over India with flat shipping rate of INR 45 for all the orders below INR 599. For all the orders above INR 599, we offer a free shipping. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.

Returns Policy

Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.

1. Manufacturing Defect
If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

2. Wrong Item Shipped

If you receive a different product then the ordered one, please contact us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

Limitation of Returns
We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product.

Shipping

We ship to all over India with flat shipping rate of INR 45 for all the orders below INR 599. For all the orders above INR 599, we offer a free shipping. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.

Recently Viewed Products Recently Viewed Products
×
Welcome Newcomer