HC SR501 - PIR Motion Detection Sensor HC SR501 - PIR Motion Detection Sensor

QC0158

26 In stock

Rs. 103.00
-
+
Rs. 103.00
(inc. GST)

To ensure the safety and security of our homes or anywhere, it is essential we install alarm systems. Motion sensors are one of the essential components of these systems. We can also employ PIR (Passive Infrared) Sensors for doing the same. HC-SR501 is a low-cost PIR sensor that can detect the presence of humans or animals by sensing the Infrared Radiation coming out of the body. Its sensitivity can be controlled by sensitivity control potentiometer and it also has an onboard signal conditioning circuitry and Fresnel Lens to improve its field of view. It is used in Motion Activated lights in bathrooms, halls, rooms, etc. in alarm applications, etc.

 

Specifications

  • Supply Voltage 5V
  • Output 3.3V TTL Logic
  • Infrared Sensor with Control Circuit Board
  • The Sensitivity and Holding Time Can be Adjusted
  • Can cover 120° and 7m range
  • Low power consumption 65mA
  • Temperature Range -20°C to 80°C


Product Description


 

To connect it to any microcontroller, power the device with 5V and GND pin from your controller like Arduino, Raspberry Pi, PIC, etc. Connect the output pin to any GPIO pin of your controller and go through your intended program. Adjust the sensitivity and time delay as per your liking from the two potentiometers provided on the module. You can also select the mode whether you want the output to remain high or go low after a specific time when a motion is detected.

 

Additional Resources

Datasheet of HC-SR501 PIR sensor Module

PIR Sensor Based Motion Detection Project using Arduino

PIR Sensor Project with a Relay

To ensure the safety and security of our homes or anywhere, it is essential we install alarm systems. Motion sensors are one of the essential components of these systems. We can also employ PIR (Passive Infrared) Sensors for doing the same. HC-SR501 is a low-cost PIR sensor that can detect the presence of humans or animals by sensing the Infrared Radiation coming out of the body. Its sensitivity can be controlled by sensitivity control potentiometer and it also has an onboard signal conditioning circuitry and Fresnel Lens to improve its field of view. It is used in Motion Activated lights in bathrooms, halls, rooms, etc. in alarm applications, etc.

 

Specifications

  • Supply Voltage 5V
  • Output 3.3V TTL Logic
  • Infrared Sensor with Control Circuit Board
  • The Sensitivity and Holding Time Can be Adjusted
  • Can cover 120° and 7m range
  • Low power consumption 65mA
  • Temperature Range -20°C to 80°C


Product Description


 

To connect it to any microcontroller, power the device with 5V and GND pin from your controller like Arduino, Raspberry Pi, PIC, etc. Connect the output pin to any GPIO pin of your controller and go through your intended program. Adjust the sensitivity and time delay as per your liking from the two potentiometers provided on the module. You can also select the mode whether you want the output to remain high or go low after a specific time when a motion is detected.

 

Additional Resources

Datasheet of HC-SR501 PIR sensor Module

PIR Sensor Based Motion Detection Project using Arduino

PIR Sensor Project with a Relay

Returns Policy

Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.

1. Manufacturing Defect
If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

2. Wrong Item Shipped

If you receive a different product then the ordered one, please contact us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

Limitation of Returns
We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product.

Shipping

We ship to all over India with flat shipping rate of INR 45 for all the orders below INR 499. For all the orders above INR 499, we offer a free shipping. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.

Returns Policy

Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.

1. Manufacturing Defect
If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

2. Wrong Item Shipped

If you receive a different product then the ordered one, please contact us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

Limitation of Returns
We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product.

Shipping

We ship to all over India with flat shipping rate of INR 45 for all the orders below INR 499. For all the orders above INR 499, we offer a free shipping. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.

Recently Viewed Products Recently Viewed Products