Float Sensor Switch For Water Level Controller Float Sensor Switch For Water Level Controller

QC0877

63 In stock

Rs. 130.00
(Including 18% GST)
-
+
[Delivery: 2 to 5 days]            

Description:

The purpose of a float switch is to open or close a circuit as the level of a liquid rises or falls. Most float switches are "normally closed," meaning the two wires coming from the top of the switch complete a circuit when the float is at its low point, resting on its bottom clip or stop (for example, when a tank is dry).

Since this sensor acts as a switch, this can be useful to turn on or off a pump, or raise an alarm when the water level goes lower than the level etc.


Depending on the application, the condition of the float switch can be changed from normally open to normally closed or vice-versa depending on the placement of the float operation.


This float sensor uses magnetic topology where a magnetic reed sensor is placed inside the sensor. Based on this magnetic reed sensor, the float sensor could achieve 0.5A of switching current at 100VDC.


Please use a Relay or other type of switching devices along with this sensor to switch high load applications.


Pinouts:

This float sensor acts like a switch, thus not having polarity and can be used in either directions.


Specifications and Features:

    • Length of the contact cable: 30.5(cm)
    • Type of Sensor : Magnetic reed based Float Sensor
    • Maximum Load : 50 W
    • Max Switching Voltage : 100V DC
    • Maximum Switching Current : 0.5 A
    • Max Contact Resistance : 0.4 Ω
    • Temp Rating: -20~ 80 degree
    • Material: High Quality Plastic Based

    Application:

    1. Water tanks
    2. Water Purifiers
    3. Fish tank or aquariums
    4. Pet water feeder
    5. Hydroponics

    Package Contains:

    1x Float Sensor Switch - Water Level


    Example Projects:

    Float Sensor Introduction and Interfacing with Arduino


    Additional Resources:

    Float Sensor Datasheet

    Description:

    The purpose of a float switch is to open or close a circuit as the level of a liquid rises or falls. Most float switches are "normally closed," meaning the two wires coming from the top of the switch complete a circuit when the float is at its low point, resting on its bottom clip or stop (for example, when a tank is dry).

    Since this sensor acts as a switch, this can be useful to turn on or off a pump, or raise an alarm when the water level goes lower than the level etc.


    Depending on the application, the condition of the float switch can be changed from normally open to normally closed or vice-versa depending on the placement of the float operation.


    This float sensor uses magnetic topology where a magnetic reed sensor is placed inside the sensor. Based on this magnetic reed sensor, the float sensor could achieve 0.5A of switching current at 100VDC.


    Please use a Relay or other type of switching devices along with this sensor to switch high load applications.


    Pinouts:

    This float sensor acts like a switch, thus not having polarity and can be used in either directions.


    Specifications and Features:

      • Length of the contact cable: 30.5(cm)
      • Type of Sensor : Magnetic reed based Float Sensor
      • Maximum Load : 50 W
      • Max Switching Voltage : 100V DC
      • Maximum Switching Current : 0.5 A
      • Max Contact Resistance : 0.4 Ω
      • Temp Rating: -20~ 80 degree
      • Material: High Quality Plastic Based

      Application:

      1. Water tanks
      2. Water Purifiers
      3. Fish tank or aquariums
      4. Pet water feeder
      5. Hydroponics

      Package Contains:

      1x Float Sensor Switch - Water Level


      Example Projects:

      Float Sensor Introduction and Interfacing with Arduino


      Additional Resources:

      Float Sensor Datasheet

      Returns Policy

      Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.

      1. Manufacturing Defect
      If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

      2. Wrong Item Shipped

      If you receive a different product then the ordered one, please contact us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

      Limitation of Returns
      We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product.

      Shipping

      We ship to all over India with flat shipping rate of INR 50 for all the orders below INR 599. For all the orders above INR 599, we offer a free shipping. We also offer priority shipping for INR 100 which provides same day shipping by Air (if battery is not included in the order). Please contact to our support team at support@quartzcomponents.com for any question related to shipping.

      Returns Policy

      Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.

      1. Manufacturing Defect
      If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

      2. Wrong Item Shipped

      If you receive a different product then the ordered one, please contact us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

      Limitation of Returns
      We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product.

      Shipping

      We ship to all over India with flat shipping rate of INR 50 for all the orders below INR 599. For all the orders above INR 599, we offer a free shipping. We also offer priority shipping for INR 100 which provides same day shipping by Air (if battery is not included in the order). Please contact to our support team at support@quartzcomponents.com for any question related to shipping.

      Recently Viewed Products Recently Viewed Products