ESP32 WROOM-32 MCU Module ESP32 WROOM-32 MCU Module

QC0472

5 In stock

Rs. 518.00
-
+
Rs. 518.00
(inc. GST)

The ESP32 is a development board developed by Espressif systems. It can be programmed using Arduino IDE and ESP-IDF. It has higher processing power than ESP8266 but it is more costly and bigger in physical dimension than ESP8266. It has a built in Bluetooth module and CAN protocol and SRAM. It has 36 GPIO Pins with a CPU clock of 160MHz. It has 12-bit ADC onboard and supports CAN, UART, I2C and I2S. It can be used in prototyping IoT products, Low power Battery operated application, small range networking projects, and with the projects which require many Input Output Pins and Wi-Fi and Bluetooth connectivity.

ESP32 WROOM-32 MCU Module Specifications

  • Microprocessor : Tensilica Xtensa LX6
  • Operating Voltage : 3.3V
  • Analog Input Pins : 12-bit, 18 Channel
  • DAC Pins: 8-bit, 2 Channel
  • Digital I/O Pins : 39 (of which 34 is normal GPIO pin)
  • SRAM : 520KB
  • WiFi : 802.11 b/g/n

Product Description

ESP32-WROOM-32 MCU Module

To use this module you need to connect its USB mini port to your PC to write programs. It can take input upto 5V as it has an onboard voltage regulator but it is a 3.3V board so you must connect a logic level converter if you are planning to use V devices with it.

Additional Resources

Getting Started with ESP 32 with Arduino IDE

Connecting to fitness band with ESP32

ESP32 Datasheet

Package Contents

1×ESP32 Development Board

The ESP32 is a development board developed by Espressif systems. It can be programmed using Arduino IDE and ESP-IDF. It has higher processing power than ESP8266 but it is more costly and bigger in physical dimension than ESP8266. It has a built in Bluetooth module and CAN protocol and SRAM. It has 36 GPIO Pins with a CPU clock of 160MHz. It has 12-bit ADC onboard and supports CAN, UART, I2C and I2S. It can be used in prototyping IoT products, Low power Battery operated application, small range networking projects, and with the projects which require many Input Output Pins and Wi-Fi and Bluetooth connectivity.

ESP32 WROOM-32 MCU Module Specifications

  • Microprocessor : Tensilica Xtensa LX6
  • Operating Voltage : 3.3V
  • Analog Input Pins : 12-bit, 18 Channel
  • DAC Pins: 8-bit, 2 Channel
  • Digital I/O Pins : 39 (of which 34 is normal GPIO pin)
  • SRAM : 520KB
  • WiFi : 802.11 b/g/n

Product Description

ESP32-WROOM-32 MCU Module

To use this module you need to connect its USB mini port to your PC to write programs. It can take input upto 5V as it has an onboard voltage regulator but it is a 3.3V board so you must connect a logic level converter if you are planning to use V devices with it.

Additional Resources

Getting Started with ESP 32 with Arduino IDE

Connecting to fitness band with ESP32

ESP32 Datasheet

Package Contents

1×ESP32 Development Board

Returns Policy

Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.

1. Manufacturing Defect
If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

2. Wrong Item Shipped

If you receive a different product then the ordered one, please contact us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

Limitation of Returns
We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product.

Shipping

We ship to all over India with flat shipping rate of INR 45 for all the orders below INR 499. For all the orders above INR 499, we offer a free shipping. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.

Returns Policy

Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.

1. Manufacturing Defect
If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

2. Wrong Item Shipped

If you receive a different product then the ordered one, please contact us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

Limitation of Returns
We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product.

Shipping

We ship to all over India with flat shipping rate of INR 45 for all the orders below INR 499. For all the orders above INR 499, we offer a free shipping. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.

Recently Viewed Products Recently Viewed Products