3.5 Inch TFT Touchscreen Display for Raspberry Pi 3.5 Inch TFT Touchscreen Display for Raspberry Pi
7 In stock
This 3.5" TFT display has 480x320 pixels with a 16-bit resolution and resistive touch option. It can fit directly on top of the Raspberry Pi board and gets powered from the Vcc pin, the display communicates through SPI protocol with the Pi.
Additionally, you can also use the HDMI port on pi to connect it to another display as well. It is designed for Raspberry Pi zero/Pi 2 /Pi 3 Model B / B+ and can also be used on other hardware platforms which have SPI interface. The highlight of this display module, it supports plug and play without reboot the Pi, and SPI speed runs as fast as 32MHz to support games and videos.
Pin Configuration
Pin No. |
Name |
Description |
1, 17 |
3.3V |
3.3V power input |
2, 4 |
5V |
5V power input |
3, 5, 7, 8, 10, 12, 13, 15, 16 |
NC |
Not Connected |
6, 9, 14, 20, 25 |
GND |
Ground Pins |
11 |
TP_IRQ |
Touch Panel interrupt, low level while the Touch Panel detects touching |
18 |
LCD_RS |
Instruction/Data Register selection |
19 |
TP_SI |
SPI data input of Touch Panel |
21 |
TP_SO |
SPI data output of Touch Panel |
22 |
RST |
Reset |
23 |
TP_SCK |
SPI clock of Touch Panel |
24 |
LCD_CS |
LCD chip selection, low active |
26 |
TP_CS |
Touch Panel chip selection, low active |
Features and Specifications:
- 320×480 resolution
- Operating Voltage: 5V
- Resistive touch control
- Touch Screen Controller: XPT2046
- Driver IC: ILI9486
- Supports any revision of Raspberry Pi (directly-pluggable)
- Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+,4B versions
- Drivers provided (works with your own Raspbian/Ubuntu directly)
- Size perfectly fits the Pi
- High quality immersion gold surface plating
- Supports Raspbian system, Ubuntu system ,kali Linux system
Additional Resources:
This 3.5" TFT display has 480x320 pixels with a 16-bit resolution and resistive touch option. It can fit directly on top of the Raspberry Pi board and gets powered from the Vcc pin, the display communicates through SPI protocol with the Pi.
Additionally, you can also use the HDMI port on pi to connect it to another display as well. It is designed for Raspberry Pi zero/Pi 2 /Pi 3 Model B / B+ and can also be used on other hardware platforms which have SPI interface. The highlight of this display module, it supports plug and play without reboot the Pi, and SPI speed runs as fast as 32MHz to support games and videos.
Pin Configuration
Pin No. |
Name |
Description |
1, 17 |
3.3V |
3.3V power input |
2, 4 |
5V |
5V power input |
3, 5, 7, 8, 10, 12, 13, 15, 16 |
NC |
Not Connected |
6, 9, 14, 20, 25 |
GND |
Ground Pins |
11 |
TP_IRQ |
Touch Panel interrupt, low level while the Touch Panel detects touching |
18 |
LCD_RS |
Instruction/Data Register selection |
19 |
TP_SI |
SPI data input of Touch Panel |
21 |
TP_SO |
SPI data output of Touch Panel |
22 |
RST |
Reset |
23 |
TP_SCK |
SPI clock of Touch Panel |
24 |
LCD_CS |
LCD chip selection, low active |
26 |
TP_CS |
Touch Panel chip selection, low active |
Features and Specifications:
- 320×480 resolution
- Operating Voltage: 5V
- Resistive touch control
- Touch Screen Controller: XPT2046
- Driver IC: ILI9486
- Supports any revision of Raspberry Pi (directly-pluggable)
- Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+,4B versions
- Drivers provided (works with your own Raspbian/Ubuntu directly)
- Size perfectly fits the Pi
- High quality immersion gold surface plating
- Supports Raspbian system, Ubuntu system ,kali Linux system
Additional Resources:
Returns Policy
Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.
1. Manufacturing Defect
If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.2. Wrong Item Shipped
If you receive a different product then the ordered one, please contact us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.
Limitation of Returns
We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product.Shipping
We ship to all over India with flat shipping rate of INR 45 for all the orders below INR 599. For all the orders above INR 599, we offer a free shipping. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.
Returns Policy
Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.
1. Manufacturing Defect
If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.2. Wrong Item Shipped
If you receive a different product then the ordered one, please contact us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.
Limitation of Returns
We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product.Shipping
We ship to all over India with flat shipping rate of INR 45 for all the orders below INR 599. For all the orders above INR 599, we offer a free shipping. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.