NEO6MV2 GPS Module with Flight Controller NEO6MV2 GPS Module with Flight Controller
18 In stock
The NEO-6MV2 is a stand-alone GPS (Global Positioning System) module featuring a high-performance 50 channel U-Blox 6 positioning engine. The NEO6MV2 GPS module checks for location on Earth and provides the Latitude and Longitude of the position it is in. This is a low-cost module with a detachable antenna, which also comes with a logic level converter and a voltage regulator, which makes it compatible with both 5V and 3.3V powered boards like Arduino Uno, Mega, Pro Mini, etc. It can be used in the Navigation Systems of Smartphones and Tablets, Drones, in location-based services, etc.
Specifications
- Robust & high accuracy
- Board size: 23mm*40mm
- Compatible with 3.3V-5V interface
- Compatible with all versions of Arduino
- EEPROM to save configuration settings
- Separated 18X18mm GPS antenna
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
- Maximum navigation update rate: 5Hz
- Default baud rate: 9600bps
- EEPROM with battery backup
- Sensitivity: -160dBm
- Supply voltage: 3.6V
- Operating temperature range: -40ºC TO 85°C
Product Description
To power the device, you can either connect your 5V pin or 3.3V pin to VCC and connect GND. As it communicates at 9600 bps via UART TTL logic, you need to connect TX and RX pins to respective pins on your controller and get the GPS coordinates of your position.
Additional Resources
Interface Neo6M GPS Module with Arduino
Interface Neo6M GPS Module with Raspberry Pi
Package Contents
1×NEO-6MV2 GPS Module
1× Detachable Antenna
The NEO-6MV2 is a stand-alone GPS (Global Positioning System) module featuring a high-performance 50 channel U-Blox 6 positioning engine. The NEO6MV2 GPS module checks for location on Earth and provides the Latitude and Longitude of the position it is in. This is a low-cost module with a detachable antenna, which also comes with a logic level converter and a voltage regulator, which makes it compatible with both 5V and 3.3V powered boards like Arduino Uno, Mega, Pro Mini, etc. It can be used in the Navigation Systems of Smartphones and Tablets, Drones, in location-based services, etc.
Specifications
- Robust & high accuracy
- Board size: 23mm*40mm
- Compatible with 3.3V-5V interface
- Compatible with all versions of Arduino
- EEPROM to save configuration settings
- Separated 18X18mm GPS antenna
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
- Maximum navigation update rate: 5Hz
- Default baud rate: 9600bps
- EEPROM with battery backup
- Sensitivity: -160dBm
- Supply voltage: 3.6V
- Operating temperature range: -40ºC TO 85°C
Product Description
To power the device, you can either connect your 5V pin or 3.3V pin to VCC and connect GND. As it communicates at 9600 bps via UART TTL logic, you need to connect TX and RX pins to respective pins on your controller and get the GPS coordinates of your position.
Additional Resources
Interface Neo6M GPS Module with Arduino
Interface Neo6M GPS Module with Raspberry Pi
Package Contents
1×NEO-6MV2 GPS Module
1× Detachable Antenna
Returns Policy
Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.
1. Manufacturing Defect
If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.2. Wrong Item Shipped
If you receive a different product then the ordered one, please contact us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.
Limitation of Returns
We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product.Shipping
We ship to all over India with flat shipping rate of INR 45 for all the orders below INR 599. For all the orders above INR 599, we offer a free shipping. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.
Returns Policy
Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.
1. Manufacturing Defect
If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.2. Wrong Item Shipped
If you receive a different product then the ordered one, please contact us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.
Limitation of Returns
We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product.Shipping
We ship to all over India with flat shipping rate of INR 45 for all the orders below INR 599. For all the orders above INR 599, we offer a free shipping. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.