10x15 Single Side Perf Board for PCB Prototype
Sold Out

10x15 CM Single Side Perf Board for PCB Prototype 10x15 CM Single Side Perf Board for PCB Prototype

QC0580

Out of stock

Rs. 76.00

In developing any Electrical and Electronics System we must first conceptualise and design the circuit and then go to testing and debugging only after these two stages are complete, we go for final fabrication on the PCB. In all these three processes testing and debugging is the most important because here we ascertain that the circuit we developed is working as intended and there is no bugs in the system which might affect the performance of the device. In this stage we fabricate the circuit on the Breadboard or the Perf board like this with the help of through hole package components to iron out kinks. It is made up of Fibre Glass which is an excellent insulator with good durability and flexibility. On one side it has Tin coating to allow the solder to stick on it and on other side it does not have anything which allows the components placement without the risk of electrical shorting between the devices. It is extremely easy to work with and you can easily solder on this board as it has soldering spots and some gap between them to avoid short circuiting but still you need to take care while designing the circuit of these things.

Specifications

  • DIY spot soldering
  • Material: single sided Tin spot PCB
  • Hole pitch: Standard 2.54mm/0.01 inch
  • Size: 10cm x 15cm
  • Build Material: Fibre Glass

Package Contents

  • 1 x 10cm x 15cm SINGLE SIDE Fibre Glass Green PERF Board

In developing any Electrical and Electronics System we must first conceptualise and design the circuit and then go to testing and debugging only after these two stages are complete, we go for final fabrication on the PCB. In all these three processes testing and debugging is the most important because here we ascertain that the circuit we developed is working as intended and there is no bugs in the system which might affect the performance of the device. In this stage we fabricate the circuit on the Breadboard or the Perf board like this with the help of through hole package components to iron out kinks. It is made up of Fibre Glass which is an excellent insulator with good durability and flexibility. On one side it has Tin coating to allow the solder to stick on it and on other side it does not have anything which allows the components placement without the risk of electrical shorting between the devices. It is extremely easy to work with and you can easily solder on this board as it has soldering spots and some gap between them to avoid short circuiting but still you need to take care while designing the circuit of these things.

Specifications

  • DIY spot soldering
  • Material: single sided Tin spot PCB
  • Hole pitch: Standard 2.54mm/0.01 inch
  • Size: 10cm x 15cm
  • Build Material: Fibre Glass

Package Contents

  • 1 x 10cm x 15cm SINGLE SIDE Fibre Glass Green PERF Board

Returns Policy

Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.

1. Manufacturing Defect
If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

2. Wrong Item Shipped

If you receive a different product then the ordered one, please contact us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

Limitation of Returns
We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product.

Shipping

We ship to all over India with flat shipping rate of INR 45 for all the orders below INR 499. For all the orders above INR 499, we offer a free shipping. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.

Returns Policy

Due to the type of products we sell, we accept limited returns. Below are the conditions where we can accept a return request.

1. Manufacturing Defect
If you receive a product with a manufacturing defect, please notify us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

2. Wrong Item Shipped

If you receive a different product then the ordered one, please contact us within the 3 days of you receive the product, supported by the proper pictures and description. Once our support team accept the return, we will provide a replacement or a complete refund including the return shipping cost.

Limitation of Returns
We don't accept the returns for the products damanged by improper use of the product. Moreover we don't accept the return, if the ordered product is not fit for any specific application. Please read the product specifications and datasheet before selecting and ordering a product.

Shipping

We ship to all over India with flat shipping rate of INR 45 for all the orders below INR 499. For all the orders above INR 499, we offer a free shipping. Please contact to our support team at support@quartzcomponents.com for any question related to shipping.

Recently Viewed Products Recently Viewed Products